Results 1 to 9 of 9

Thread: dependency resolution failed and curl issues

  1. #1

    Post dependency resolution failed and curl issues

    zypper up gives output :
    Download (curl) error for 'http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/media.1/media':
    Error code: Curl error 8
    Error message:


    and viber installation says dependency resolution failed

    zypper ref gives output:
    strangersth@linux-hqct:~> sudo zypper ref
    Repository 'Packman' is up to date.
    Repository 'libdvdcss repository' is up to date.
    Repository 'Packman Repository' is up to date.
    Repository 'packman-essentials' is up to date.
    Repository 'openSUSE-Leap-15.0-Debug' is up to date.
    Repository 'openSUSE-Leap-15.0-Debug-Non-Oss' is up to date.
    Repository 'openSUSE-Leap-15.0-Update-Debug' is up to date.
    Repository 'openSUSE-Leap-15.0-Update-Debug-Non-Oss' is up to date.
    Download (curl) error for 'http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/media.1/media':
    Error code: Curl error 8
    Error message:

    i think i may have installed leap incorrectly cause before it had error:
    empty destination in URI:hd:///?device=/dev/disk/by-id/-usb-verbatim
    which i think says installation usb missing but i solved it by disabling the repo. will it cause problems in future or shall i install leap again completely clean?I dont want struggles later after i have used suse for daily purpose...recently installed so m okay now to reinstall but after many days i will have other datas and i dont wanna loose tht again

  2. #2
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    11,146
    Blog Entries
    2

    Default Re: dependency resolution failed and curl issues

    Quote Originally Posted by strangersth View Post
    zypper up gives output :
    Download (curl) error for 'http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/media.1/media':
    Error code: Curl error 8
    Error message:


    and viber installation says dependency resolution failed

    zypper ref gives output:
    strangersth@linux-hqct:~> sudo zypper ref
    Repository 'Packman' is up to date.
    Repository 'libdvdcss repository' is up to date.
    Repository 'Packman Repository' is up to date.
    Repository 'packman-essentials' is up to date.
    Repository 'openSUSE-Leap-15.0-Debug' is up to date.
    Repository 'openSUSE-Leap-15.0-Debug-Non-Oss' is up to date.
    Repository 'openSUSE-Leap-15.0-Update-Debug' is up to date.
    Repository 'openSUSE-Leap-15.0-Update-Debug-Non-Oss' is up to date.
    Download (curl) error for 'http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/media.1/media':
    Error code: Curl error 8
    Error message:

    i think i may have installed leap incorrectly cause before it had error:
    empty destination in URI:hd:///?device=/dev/disk/by-id/-usb-verbatim
    which i think says installation usb missing but i solved it by disabling the repo. will it cause problems in future or shall i install leap again completely clean?I dont want struggles later after i have used suse for daily purpose...recently installed so m okay now to reinstall but after many days i will have other datas and i dont wanna loose tht again
    Your "zypper ref" repo error points to a subdirectory of the non-oss repository, so IMO you should just remove that entry.
    You should be able to use the YaST Repository Management module or if you post your repo list, then someone can suggest a zypper command.
    Code:
    zypper lr
    The error you describe in the last paragraph of your post points to a different location so is different...
    It looks like you used n external verbatim USB device containing media (Was it used when you originally installed?).
    More than likely, you should at least disable or even remove the entry altogether (same instructions for resolving as the first error)

    TSU
    Beginner Wiki Quickstart - https://en.opensuse.org/User:Tsu2/Quickstart_Wiki
    Solved a problem recently? Create a wiki page for future personal reference!
    Learn something new?
    Attended a computing event?
    Post and Share!

  3. #3

    Default Re: dependency resolution failed and curl issues

    Code:
    zypper ls -d
    I can be wrong but it seems that it looks for the installation media
    In case it is enabled disable it
    ------------------------------------
    Correct me if I'm wrong .
    ------------------------------------

  4. #4
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    12,505
    Blog Entries
    3

    Default Re: dependency resolution failed and curl issues

    Quote Originally Posted by strangersth View Post
    Code:
    strangersth@linux-hqct:~> sudo zypper ref
    Repository 'Packman' is up to date.                                                     
    Repository 'libdvdcss repository' is up to date.                                        
    Repository 'Packman Repository' is up to date.                                          
    Repository 'packman-essentials' is up to date.                                          
    Repository 'openSUSE-Leap-15.0-Debug' is up to date.                                    
    Repository 'openSUSE-Leap-15.0-Debug-Non-Oss' is up to date.                            
    Repository 'openSUSE-Leap-15.0-Update-Debug' is up to date.                             
    Repository 'openSUSE-Leap-15.0-Update-Debug-Non-Oss' is up to date.
    That looks good thus far.
    Code:
    Download (curl) error for 'http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/media.1/media':
    Error code: Curl error 8
    Error message:
    I think you have a bad repo configured somewhere. You probably just need to remove that repo.

    Post the output from:
    Code:
    zypper lr -d
    and use CODE tags to post it. You can generate CODE tags with the "#" icon near the top of the edit window.

    i think i may have installed leap incorrectly cause before it had error:
    empty destination in URI:hd:///?device=/dev/disk/by-id/-usb-verbatim
    which i think says installation usb missing but i solved it by disabling the repo. will it cause problems in future or shall
    Disabling that repo should be fine. You are correct, that it is a reference to the install USB that you used.

    My experience with Leap 15.0, was that repo was automatically disabled. So I'm not sure how it came to be enabled on your system. But then the debug repos are normally disabled, and you seem to have enabled those (which is okay).
    openSUSE Leap 15.1; KDE Plasma 5;
    testing Leap 15.2Alpha

  5. #5

    Post Re: dependency resolution failed and curl issues

    Quote Originally Posted by nrickert View Post
    That looks good thus far.

    I think you have a bad repo configured somewhere. You probably just need to remove that repo.

    Post the output from:
    Code:
    zypper lr -d
    and use CODE tags to post it. You can generate CODE tags with the "#" icon near the top of the edit window.


    Disabling that repo should be fine. You are correct, that it is a reference to the install USB that you used.

    My experience with Leap 15.0, was that repo was automatically disabled. So I'm not sure how it came to be enabled on your system. But then the debug repos are normally disabled, and you seem to have enabled those (which is okay).

    Code:
    strangersth@linux-hqct:~> zypper lr -d
    Repository priorities in effect:                             (See 'zypper lr -P' for details)
          90 (raised priority)  :  1 repository  
          99 (default priority) : 13 repositories
    
    #  | Alias                            | Name                                    | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                          | Service
    ---+----------------------------------+-----------------------------------------+---------+-----------+---------+----------+--------+------------------------------------------------------------------------------+--------
     1 | Packman                          | Packman                                 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://packman.jacobs-university.de/suse/openSUSE_Leap_42.1/                 |        
     2 | http-opensuse-guide.org-6ea84065 | libdvdcss repository                    | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_15.0/                           |        
     3 | http-packman.inode.at-5f63c49b   | Packman Repository                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://packman.inode.at/suse/openSUSE_Leap_15.0/                             |        
     4 | packman-essentials               | packman-essentials                      | Yes     | (r ) Yes  | Yes     |   90     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.0/Essentials |        
     5 | repo-debug                       | openSUSE-Leap-15.0-Debug                | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/distribution/leap/15.0/repo/oss/          |        
     6 | repo-debug-non-oss               | openSUSE-Leap-15.0-Debug-Non-Oss        | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/distribution/leap/15.0/repo/non-oss/      |        
     7 | repo-debug-update                | openSUSE-Leap-15.0-Update-Debug         | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/update/leap/15.0/oss/                     |        
     8 | repo-debug-update-non-oss        | openSUSE-Leap-15.0-Update-Debug-Non-Oss | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/update/leap/15.0/non-oss/                 |        
     9 | repo-non-oss                     | openSUSE-Leap-15.0-Non-Oss              | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/            |        
    10 | repo-oss                         | openSUSE-Leap-15.0-Oss                  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.0/repo/oss/                |        
    11 | repo-source                      | openSUSE-Leap-15.0-Source               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/source/distribution/leap/15.0/repo/oss/         |        
    12 | repo-source-non-oss              | openSUSE-Leap-15.0-Source-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/source/distribution/leap/15.0/repo/non-oss/     |        
    13 | repo-update                      | openSUSE-Leap-15.0-Update               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.0/oss/                           |        
    14 | repo-update-non-oss              | openSUSE-Leap-15.0-Update-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.0/non-oss/                       |        
    strangersth@linux-hqct:~>
    n isn't there a chat system?

  6. #6
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    25,004

    Default Re: dependency resolution failed and curl issues

    There is a lot to explain here (by you I assume).

    Why is there still a 42.1 Packman repo here (even enabled)? Better remove that.

    Why do you have a Packman and a Packman Essentials active? Packman includes Packman Essentials. Better remove the Packman Essentials.

    Why are all the debug repos enabled? They are normally disabled at system installation and are only enabled when debugging is needed. Are you debugging openSUSE?

    Why are the source repos enabled? They are normally disabled at installation and are enabled when people want to build software themselves. Are you doing that?

    My idea is that cleaning up first before we concentrate on the problem might be good.
    Henk van Velden

  7. #7
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,806
    Blog Entries
    14

    Default Re: dependency resolution failed and curl issues

    Quote Originally Posted by strangersth View Post
    Code:
    strangersth@linux-hqct:~> zypper lr -d
    Repository priorities in effect:                             (See 'zypper lr -P' for details)
          90 (raised priority)  :  1 repository  
          99 (default priority) : 13 repositories
    
    #  | Alias                            | Name                                    | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                          | Service
    ---+----------------------------------+-----------------------------------------+---------+-----------+---------+----------+--------+------------------------------------------------------------------------------+--------
     1 | Packman                          | Packman                                 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://packman.jacobs-university.de/suse/openSUSE_Leap_42.1/                 |        
     2 | http-opensuse-guide.org-6ea84065 | libdvdcss repository                    | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_15.0/                           |        
     3 | http-packman.inode.at-5f63c49b   | Packman Repository                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://packman.inode.at/suse/openSUSE_Leap_15.0/                             |        
     4 | packman-essentials               | packman-essentials                      | Yes     | (r ) Yes  | Yes     |   90     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.0/Essentials |        
     5 | repo-debug                       | openSUSE-Leap-15.0-Debug                | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/distribution/leap/15.0/repo/oss/          |        
     6 | repo-debug-non-oss               | openSUSE-Leap-15.0-Debug-Non-Oss        | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/distribution/leap/15.0/repo/non-oss/      |        
     7 | repo-debug-update                | openSUSE-Leap-15.0-Update-Debug         | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/update/leap/15.0/oss/                     |        
     8 | repo-debug-update-non-oss        | openSUSE-Leap-15.0-Update-Debug-Non-Oss | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/debug/update/leap/15.0/non-oss/                 |        
     9 | repo-non-oss                     | openSUSE-Leap-15.0-Non-Oss              | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/            |        
    10 | repo-oss                         | openSUSE-Leap-15.0-Oss                  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.0/repo/oss/                |        
    11 | repo-source                      | openSUSE-Leap-15.0-Source               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/source/distribution/leap/15.0/repo/oss/         |        
    12 | repo-source-non-oss              | openSUSE-Leap-15.0-Source-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/source/distribution/leap/15.0/repo/non-oss/     |        
    13 | repo-update                      | openSUSE-Leap-15.0-Update               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.0/oss/                           |        
    14 | repo-update-non-oss              | openSUSE-Leap-15.0-Update-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.0/non-oss/                       |        
    strangersth@linux-hqct:~>
    n isn't there a chat system?
    Remove all the bold ones.
    And yes, there are openSUSE IRC channels. Not a chat system in the sense of one on one support. We're all just volunteers, doing what we do in our spare time.
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  8. #8
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    12,505
    Blog Entries
    3

    Default Re: dependency resolution failed and curl issues

    Quote Originally Posted by Knurpht View Post
    Remove all the bold ones.
    I'll disagree slightly.

    Leave the debug and source repos there, but disable them. Remove the other bold ones.

    That's not really much different, but it is harmless to leave them there but disabled, and at some future time they might be useful.

    I will admit that I have never enabled a source repo. I have occasionally enable a debug repo for debugging a particular problem, but I usually disable it again afterwards.
    openSUSE Leap 15.1; KDE Plasma 5;
    testing Leap 15.2Alpha

  9. #9

    Default Re: dependency resolution failed and curl issues

    Quote Originally Posted by Knurpht View Post
    Remove all the bold ones.
    And yes, there are openSUSE IRC channels. Not a chat system in the sense of one on one support. We're all just volunteers, doing what we do in our spare time.
    I perfectly agree, and if then also wants Debug and the other eliminated, they are available among the repo of the community ... two clicks
    ------------------------------------
    Correct me if I'm wrong .
    ------------------------------------

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •