Results 1 to 3 of 3

Thread: Tumbleweed X segmentation fault after update

  1. #1

    Default Tumbleweed X segmentation fault after update

    After update X server doesn't start. It crashes with following error:

    [sudo] password for root:  
    xauth:  file /root/.serverauth.6585 does not exist
    X.Org X Server 1.19.6
    Release Date: 2017-12-20
    X Protocol Version 11, Revision 0
    Build Operating System: openSUSE SUSE LINUX
    Current Operating System: Linux linux-3nxl 4.16.3-1-default #1 SMP PREEMPT Thu Apr 19 20:56:06 UTC 2018 (2fd48c5) x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.3-1-default root=UUID=cca8fe7d-f02d-45e6-950d-cd1c1c31eca8 splash=silent quiet showopts
    Build Date: 17 April 2018  12:00:00PM
    Current version of pixman: 0.34.0
            Before reporting problems, check
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 30 04:17:16 2018
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    MESA-LOADER: failed to retrieve device information
    (EE) Backtrace:
    (EE) 0: X (xorg_backtrace+0x65) [0x55a51d6dcfd5]
    (EE) 1: X (0x55a51d528000+0x1b8d89) [0x55a51d6e0d89]
    (EE) 2: /lib64/ (0x7fe13a154000+0x12080) [0x7fe13a166080]
    (EE) 3: /usr/lib64/  
    (EE) 4: /usr/lib64/ (0x7fe130e45000+0x7a21c0) [0x7fe1315e71c0]
    (EE) 5: /lib64/ (0x7fe13c3a9000+0xf40a) [0x7fe13c3b840a]
    (EE) 6: /lib64/ (0x7fe13c3a9000+0xf516) [0x7fe13c3b8516]
    (EE) 7: /lib64/ (0x7fe13c3a9000+0x1367f) [0x7fe13c3bc67f]
    (EE) 8: /lib64/ (_dl_catch_exception+0x6f) [0x7fe139ecbe5f]
    (EE) 9: /lib64/ (0x7fe13c3a9000+0x12f1a) [0x7fe13c3bbf1a]
    (EE) 10: /lib64/ (0x7fe13b8a5000+0xf96) [0x7fe13b8a5f96]
    (EE) 11: /lib64/ (_dl_catch_exception+0x6f) [0x7fe139ecbe5f]
    (EE) 12: /lib64/ (_dl_catch_error+0x2f) [0x7fe139ecbeef]
    (EE) 13: /lib64/ (0x7fe13b8a5000+0x1685) [0x7fe13b8a6685]
    (EE) 14: /lib64/ (dlopen+0x71) [0x7fe13b8a6051]
    (EE) 15: /usr/lib64/ (0x7fe136726000+0x4b34) [0x7fe13672ab34]
    (EE) 16: /usr/lib64/ (0x7fe136726000+0x4c5c) [0x7fe13672ac5c]
    (EE) 17: /usr/lib64/ (0x7fe136726000+0x50a8) [0x7fe13672b0a8]
    (EE) 18: /usr/lib64/ (gbm_create_device+0x57) [0x7fe136728c57]
    (EE) 19: /usr/lib64/xorg/modules/ (glamor_egl_init+0x83) [0x7fe13693c773]
    (EE) 20: /usr/lib64/xorg/modules/drivers/ (0x7fe13717c000+0xa4b5) [0x7fe1371864b5]
    (EE) 21: X (InitOutput+0xa5a) [0x55a51d5c1f4a]
    (EE) 22: X (0x55a51d528000+0x57da3) [0x55a51d57fda3]
    (EE) 23: /lib64/ (__libc_start_main+0xe7) [0x7fe139db7a87]
    (EE) 24: X (_start+0x2a) [0x55a51d569c5a]
    (EE) Segmentation fault at address 0x7fe1331bee33
    Fatal server error:
    (EE) Caught signal 11 (Segmentation fault). Server aborting
    Please consult the The X.Org Foundation support  
     for help.  
    (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    (EE) Server terminated with error (1). Closing log file.
    xinit: giving up
    xinit: unable to connect to X server: Connection refused
    xinit: server error
    xinit failed. /usr/bin/Xorg is not setuid, maybe that's the reason?
    If so either use a display manager (strongly recommended) or adjust /etc/permissions.local and run "chkstat --system --set" afterwards

  2. #2

    Default Re: Tumbleweed X segmentation fault after update

    During update installation crashed with rpmdb corruption so I had to abort update and rebuild rpm database. Also force reinstalled packege during which error occured. Then continued update. I'm not sure if it may be related.

  3. #3
    Join Date
    Dec 2008
    FL, USA
    Blog Entries

    Default Re: Tumbleweed X segmentation fault after update

    Does booting the previous kernel change anything? Which kernel was running before the update? What is the output from:
    inxi -G -c0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts