Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Terminal login persists - new kernel, potential broken drivers or desktop manager

  1. #1

    Default Terminal login persists - new kernel, potential broken drivers or desktop manager

    Am on tumbleweed version 20180406, kernel 4.16. My graphics card is an NVIDIA GTX 680. Have read this thread but am not sure it is applicable to my situation, as even choosing the old kernel version (4.15.13) from GRUB advanced options still leads to a terminal login. And, even if it is, I am not 100% sure on how to apply the patch so any help there would be great too.

    Also apologies for not knowing how to format with inline code, I can't seem to find that option anywhere in the editor.

    I have tried a few things:

    Running
    Code:
    startkde
    , which gives
    Code:
    $DISPLAY is not set or cannot connect to the X server.
    So then running
    Code:
    startx
    (which is apparently deprecated, but it was still a suggested fix) says that
    Code:
    xinit failed. /usr/bin/Xorg is not setuid, maybe that's the reason? If so either use a display manager ...
    I have tried running
    Code:
    sudo zypper dup
    , but it says everything is up to date.

    I have tried going through
    Code:
    sudo yast
    to install nvidia drivers (playing around with either
    Code:
    x11-video-nvidiaG04, xf86-video-nouveau, and xf86-video-nv
    whilst making sure to edit
    Code:
    /etc/X11/xorg.conf
    ), but all versions do not seem to give the GUI login.

    I have also played around with editing
    Code:
    /etc/sysconfig
    to change my desktop manager, but that has given no success either (sddm or kdm both). Running
    Code:
    systemctl status sddm
    shows that it is active, however there is a line:
    Code:
    Process: 1829 ExecStartPre=/usr/bin/plymouth quit --retain-splash (code=exited, status=1/FAILURE)
    which might be of use.

    Any help would be great!

  2. #2

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    The nvidia driver currently doesn't work with Kernel 4.16.
    You'd need to patch it, or stick to an older kernel for now (which you should be able to boot via "Advanced Options" in the boot menu) until it is updated.

    There are a couple of threads about this already, as you noticed...

    If Kernel 4.15 doesn't work either, there's likely a general problem with your nvidia driver installation.
    Try to uninstall and reinstall it completely (when booted to kernel 4.15), maybe that helps.
    If not, please post more information how you installed nvidia, what kernel and nvidia packages you do have installed, and /var/log/Xorg.0.log (and/or /var/log/Xorg.0.log.old) which should show *why* Xorg fails to start exactly.

    Other remarks:
    - you cannot run startkde in text mode, it needs a running X session.
    - startx doesn't work for normal users with the default security settings, only root has the necessary privileges (but it's unsupported and disrecommended since years anyway)
    - it's probably better to remove /etc/X11/xorg.conf completely to let Xorg pick the driver automatically. Might help getting a graphical session even if the installed nvidia driver doesn't work.
    Last edited by wolfi323; 09-Apr-2018 at 03:50.

  3. #3

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    Quote Originally Posted by wolfi323 View Post
    The nvidia driver currently doesn't work with Kernel 4.16.
    You'd need to patch it, or stick to an older kernel for now (which you should be able to boot via "Advanced Options" in the boot menu) until it is updated.

    There are a couple of threads about this already, as you noticed...
    I suppose I should rephrase - how do I know if it's a fault with how I've setup my DM, rather than with my graphics (as opposed to just fixing the graphics and seeing if it works again)?

    Other remarks:
    - you cannot run startkde in text mode, it needs a running X session.
    - startx doesn't work for normal users with the default security settings, only root has the necessary privileges (but it's unsupported and disrecommended since years anyway)
    - it's probably better to remove /etc/X11/xorg.conf completely to let Xorg pick the driver automatically. Might help getting a graphical session even if the installed nvidia driver doesn't work.
    So removing xorg.conf gave a graphical session, but its not at the monitors native resolution and the 2nd monitor isn't being detected. But, it's a start. Each time I reboot the file is remade though, so I need to remove it every single time first. I'm assuming there's a way to figure this out at the end?

    If Kernel 4.15 doesn't work either, there's likely a general problem with your nvidia driver installation.
    Try to uninstall and reinstall it completely (when booted to kernel 4.15), maybe that helps.

    If not, please post more information how you installed nvidia, what kernel and nvidia packages you do have installed, and /var/log/Xorg.0.log (and/or /var/log/Xorg.0.log.old) which should show *why* Xorg fails to start exactly.
    kernel: 4.15.3
    list of nvidia packages installed: nvidia-computeG04, nvidia-gfxG04-kmp-default, nvidia-glG04, x11-video-nvidiaG04.
    method: uninstalled and reinstalled using instructions from SDB -- https://en.opensuse.org/SDB:NVIDIA_drivers

    It has still failed.

    Link to Xorg.0.log -- https://paste.opensuse.org/6acc3a05

    Xorg.0.log.old -- https://paste.opensuse.org/5f38ff45

    I suppose of note is that Xorg.0.log.old tries to load a module 'nvida', but I can't seem to figure out why.

    Also, I'm not sure if this would be helpful -- trying to run NVIDIA X Server settings prompts the message "You do not appear to be using the NVIDIA X driver.... run `nvidia-xconfig` as root and restart the X server. Running this the first time (after xorg.conf is deleted) says that xorg-server was not found, and suggests adding the directory of xorg-server.pc to the PKG_CONFIG_PATH env variable. But, it then makes a xorg.conf, and then running `nvidia-xconfig` again updates it.

  4. #4

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    Quote Originally Posted by jcqellis View Post
    I suppose I should rephrase - how do I know if it's a fault with how I've setup my DM, rather than with my graphics (as opposed to just fixing the graphics and seeing if it works again)?
    You could try a different DM.

    But the Xorg logs do show what's going on anyway.

    So removing xorg.conf gave a graphical session, but its not at the monitors native resolution and the 2nd monitor isn't being detected. But, it's a start.
    Because nvidia fails to load and the fallback fbdev driver is used, which takes over the screen resolution from text mode (and ultimatively the boot menu).

    Each time I reboot the file is remade though, so I need to remove it every single time first. I'm assuming there's a way to figure this out at the end?
    xorg.conf should not get recreated automatically.

    Link to Xorg.0.log -- https://paste.opensuse.org/6acc3a05
    The nvidia kernel module fails to load, so the nvidia X driver cannot be loaded either.
    Code:
    [   208.047] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
    
    [   208.047] (EE) NVIDIA:     system's kernel log for additional error messages and
    
    [   208.047] (EE) NVIDIA:     consult the NVIDIA README for details.
    As mentioned, the fbdev driver is loaded as fallback now, but as nvidia's GLX module is in use, OpenGL does not work (and that likely also prevents the DM to work, as at least SDDM does require OpenGL support).

    Xorg.0.log.old -- https://paste.opensuse.org/5f38ff45

    I suppose of note is that Xorg.0.log.old tries to load a module 'nvida', but I can't seem to figure out why.
    This is with an xorg.conf, which supposedly sets nvidia as driver.
    As nvidia cannot be loaded (it seems to be not installed here, although strange enough, nvidia's GLX module is), starting Xorg fails.

    Xorg.0.log.old is from the previous boot though, so not really the one we should concentrate on.

    Also, I'm not sure if this would be helpful -- trying to run NVIDIA X Server settings prompts the message "You do not appear to be using the NVIDIA X driver....
    That's because nvidia is not in use.
    Running nvidia-xconfig won't help, this just creates an xorg.conf that sets the nvidia driver to be loaded.
    I suppose that (running nvidia-xconfig) is the reason why you write "Each time I reboot the file is remade though"...

    So the main problem is that the nvidia kernel module cannot be loaded, even when booting Kernel 4.15.

    Please try to reinstall it, and provide the output. That should show whether it fails to build.
    Code:
    sudo zypper in -f nvidia-gfxG04-kmp-default
    And please also provide the list of kernel packages installed:
    Code:
    rpm -qa|grep kernel
    Maybe also your repo list, and the exact nvidia package versions, just to check that there's no mixture or wrong repo in use:
    Code:
    rpm -qa|grep nvidia
    zypper lr -d
    (e.g. 42.3's nvidia repo won't work well on TW)

    Also, did you ever try to install the nvidia driver using the .run installer?
    There may be some remnants left, causing problems.

    And to be clear: do *not* run nvidia-xconfig. It isn't necessary, and can only break things.
    Last edited by wolfi323; 09-Apr-2018 at 08:34.

  5. #5

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    That makes sense.

    Please try to reinstall it, and provide the output. That should show whether it fails to build.
    Code:
    sudo zypper in -f nvidia-gfxG04-kmp-default
    Reinstalled it with force, problem not solved. Suse paste is giving me spammer error so here is an output from zypper - https://ghostbin.com/paste/bk6sy

    And please also provide the list of kernel packages installed:
    Code:
    rpm -qa|grep kernel
    https://paste.opensuse.org/ace1e510

    Maybe also your repo list, and the exact nvidia package versions, just to check that there's no mixture or wrong repo in use:
    Code:
    rpm -qa|grep nvidia
    Code:
    x11-video-nvidiaG04-390.48-6.1.x86_64
    nvidia-computeG04-390.48-6.1.x86_64
    nvidia-glG04-390.48-6.1.x86_64
    nvidia-gfxG04-kmp-default-390.48_k4.15.13_1-6.1.x86_64
    Code:
    zypper lr -d
    Code:
    #  | Alias                          | Name                        | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                                 | Service
    ---+--------------------------------+-----------------------------+---------+-----------+---------+----------+--------+-------------------------------------------------------------------------------------+--------
     1 | Atom                           | Atom Editor                 | No      | ----      | ----    |   99     | rpm-md | https://packagecloud.io/AtomEditor/atom/el/7/x86_64                                 |        
     2 | NVIDIA                         | NVIDIA                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://http.download.nvidia.com/opensuse/tumbleweed                                 |        
     3 | download.nvidia.com-tumbleweed | nVidia Graphics Drivers     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.nvidia.com/opensuse/tumbleweed                                     |        
     4 | openSUSE-20180224-0            | openSUSE-20180224-0         | No      | ----      | ----    |   99     | yast2  | hd:///?device=/dev/disk/by-id/usb-General_USB_Flash_Disk_0552090000000084-0:0-part2 |        
     5 | packman                        | packman                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Tumbleweed/                 |        
     6 | repo-debug                     | openSUSE-Tumbleweed-Debug   | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/tumbleweed/repo/oss/                             |        
     7 | repo-non-oss                   | openSUSE-Tumbleweed-Non-Oss | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/tumbleweed/repo/non-oss/                               |        
     8 | repo-oss                       | openSUSE-Tumbleweed-Oss     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/tumbleweed/repo/oss/                                   |        
     9 | repo-source                    | openSUSE-Tumbleweed-Source  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/tumbleweed/repo/oss/                            |        
    10 | repo-update                    | openSUSE-Tumbleweed-Update  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/tumbleweed/                                     |        
    11 | skype-stable                   | skype (stable)              | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://repo.skype.com/rpm/stable/                                                  |        
    12 | skypeforlinux                  | skypeforlinux               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://repo.skype.com/rpm/stable                                                   |

    Also, did you ever try to install the nvidia driver using the .run installer?
    There may be some remnants left, causing problems.
    No, I have only ever done it through yast.

  6. #6

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    After uninstalling, removing the repositories, and reinstalling as specified by the SDB, here is some new output which is slightly different:

    List of kernel packages and nvidia packages are the same.

    List of repos:

    Code:
    #  | Alias               | Name                        | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                                 | Service
    ---+---------------------+-----------------------------+---------+-----------+---------+----------+--------+-------------------------------------------------------------------------------------+--------
     1 | Atom                | Atom Editor                 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://packagecloud.io/AtomEditor/atom/el/7/x86_64                                 |        
     2 | NVIDIA              | NVIDIA                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://http.download.nvidia.com/opensuse/tumbleweed                                 |        
     3 | openSUSE-20180224-0 | openSUSE-20180224-0         | No      | ----      | ----    |   99     | yast2  | hd:///?device=/dev/disk/by-id/usb-General_USB_Flash_Disk_0552090000000084-0:0-part2 |        
     4 | packman             | packman                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Tumbleweed/                 |        
     5 | repo-debug          | openSUSE-Tumbleweed-Debug   | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/tumbleweed/repo/oss/                             |        
     6 | repo-non-oss        | openSUSE-Tumbleweed-Non-Oss | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/tumbleweed/repo/non-oss/                               |        
     7 | repo-oss            | openSUSE-Tumbleweed-Oss     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/tumbleweed/repo/oss/                                   |        
     8 | repo-source         | openSUSE-Tumbleweed-Source  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/tumbleweed/repo/oss/                            |        
     9 | repo-update         | openSUSE-Tumbleweed-Update  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/tumbleweed/                                     |        
    10 | skype-stable        | skype (stable)              | Yes     | (r ) Yes  | No      |   99     | rpm-md | https://repo.skype.com/rpm/stable/                                                  |

    After running `sudo zypper in -f nvidia-gfxG04-kmp-default`:

    https://paste.opensuse.org/a202232d

  7. #7

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    Quote Originally Posted by jcqellis View Post
    After uninstalling, removing the repositories, and reinstalling as specified by the SDB, here is some new output which is slightly different:
    Seems you forgot to post the output?

    List of kernel packages and nvidia packages are the same.
    The package lists are fine, except for one thing:
    You have kernel-pae-devel installed, which are the devel files for the 32bit PAE Kernel, i.e. that's useless.
    Better uninstall it.
    I don't think it should cause the problem though.

    List of repos:
    That's fine.

    After running `sudo zypper in -f nvidia-gfxG04-kmp-default`:

    https://paste.opensuse.org/a202232d
    Hm, I don't see any error in there, except some complaints about incompatibilities with kernel 4.16 which are to be expected I suppose.
    You do boot kernel 4.15, do you?

    If it still doesn't work (with kernel 4.15.3), I'd suggest to uninstall kernel 4.16 and the nvidia driver completely, reboot, and then reinstall the driver.
    You can remove a particular kernel (or package) version in YaST->Software Management by clicking on "Versions", or via zypper by specifying the exact version like e.g.:
    Code:
    sudo zypper rm kernel-default-4.16.0
    A patch for kernel 4.16 has been added to the nvidia packages yesterday, but the update is not in the repo yet. I'd expect it to appear today or tomorrow though.
    Last edited by wolfi323; 09-Apr-2018 at 23:40.

  8. #8

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    kernel-pae-devel uninstalled.

    Interestingly, after deleting the 4.16 kernel packages AND uninstalling all nvidia drivers from the official repo restores things to normal -- both monitors working at native 1080p.

    However, upon reinstalling nvidia-gfxG04-kmp-default, the problem comes back - scaled down resolution on only one monitor. Here's the output after running `sudo zypper in -f nvidia-gfxG04-kmp-default`:

    Code:
    Additional rpm output:
    cat: write error: Broken pipe
    /usr/src/kernel-modules/nvidia-390.48-default /
    rm -f -r conftest
    make[1]: Entering directory '/usr/src/linux-4.15.13-1'
    make[2]: Entering directory '/usr/src/linux-4.15.13-1-obj/x86_64/default'
    make[2]: Leaving directory '/usr/src/linux-4.15.13-1-obj/x86_64/default'
    make[1]: Leaving directory '/usr/src/linux-4.15.13-1'
    /
    make: *** No rule to make target 'kernelrelease'.  Stop.
    make: Entering directory '/usr/src/linux-4.16.0-1-obj/x86_64/default'
    make: *** No rule to make target 'modules'.  Stop.                                                                                                                
    make: Leaving directory '/usr/src/linux-4.16.0-1-obj/x86_64/default'                                                                                              
    /usr/src/kernel-modules/nvidia-390.48-default /                                                                                                                   
    make[1]: *** /lib/modules//source: No such file or directory.  Stop.                                                                                              
    make: *** [Makefile:79: modules] Error 2                                                                                                                          
    /                                                                                                                                                                 
    install: cannot stat '/usr/src/kernel-modules/nvidia-390.48-default/nvidia*.ko': No such file or directory                                                        
    update-alternatives: using /usr/lib/nvidia/alternate-install-present-default to provide /usr/lib/nvidia/alternate-install-present (alternate-install-present) in auto mode                                                                                                                                                          
    
    Modprobe blacklist files have been created at /etc/modprobe.d to prevent Nouveau from loading. This can be reverted by deleting /etc/modprobe.d/nvidia-*.conf.    
    
    *** Reboot your computer and verify that the NVIDIA graphics driver can be loaded. ***                                                                            
    
    grep: /etc/sysconfig/kernel: No such file or directory                                                                                                            
    Creating initrd: /boot/initrd-4.15.13-1-default                                                                                                                   
    dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.15.13-1-default 4.15.13-1-default                                 
    dracut: dracut module 'plymouth' will not be installed, because it's in the list to be omitted!                                                                   
    dracut: *** Including module: bash ***                                                                                                                            
    dracut: *** Including module: systemd ***                                                                                                                         
    dracut: *** Including module: warpclock ***                                                                                                                       
    dracut: *** Including module: systemd-initrd ***                                                                                                                  
    dracut: *** Including module: i18n ***                                                                                                                            
    dracut: Could not find FONT_MAP none!                                                                                                                             
    dracut: *** Including module: btrfs ***                                                                                                                           
    dracut: *** Including module: kernel-modules ***                                                                                                                  
    dracut: *** Including module: resume ***                                                                                                                          
    dracut: *** Including module: rootfs-block ***                                                                                                                    
    dracut: *** Including module: suse-xfs ***                                                                                                                        
    dracut: *** Including module: terminfo ***                                                                                                                        
    dracut: *** Including module: udev-rules ***                                                                                                                      
    dracut: Skipping udev rule: 40-redhat.rules
    dracut: Skipping udev rule: 50-firmware.rules
    dracut: Skipping udev rule: 50-udev.rules
    dracut: Skipping udev rule: 91-permissions.rules
    dracut: Skipping udev rule: 80-drivers-modprobe.rules
    dracut: Skipping udev rule: 61-persistent-storage-compat.rules
    dracut: *** Including module: dracut-systemd ***
    dracut: *** Including module: haveged ***
    dracut: *** Including module: ostree ***
    dracut: *** Including module: usrmount ***
    dracut: *** Including module: base ***
    dracut: *** Including module: fs-lib ***
    dracut: *** Including module: shutdown ***
    dracut: *** Including module: suse ***
    dracut: *** Including modules done ***
    dracut: *** Installing kernel module dependencies and firmware ***
    dracut: *** Installing kernel module dependencies and firmware done ***
    dracut: *** Resolving executable dependencies ***
    dracut: *** Resolving executable dependencies done***
    dracut: *** Hardlinking files ***
    dracut: *** Hardlinking files done ***
    dracut: *** Stripping files ***
    dracut: *** Stripping files done ***
    dracut: *** Generating early-microcode cpio image ***
    dracut: *** Constructing GenuineIntel.bin ****
    dracut: *** Store current command line parameters ***
    dracut: Stored kernel commandline:
    dracut:  resume=UUID=504b9aa8-c026-4ff4-9d39-6269dd247705
    dracut:  root=UUID=b9f7904b-3c9a-4751-8003-9441b22f9faa rootfstype=btrfs rootflags=rw,relatime,ssd,space_cache,subvolid=5,subvol=/,
    dracut: *** Creating image file '/boot/initrd-4.15.13-1-default' ***
    dracut: *** Creating initramfs image file '/boot/initrd-4.15.13-1-default' done ***
    On boot (when nvidia drivers are not installed), dmesg also gives new error messages which were not present before:

    Code:
    nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for DVI-D-1
    But I suppose on the surface things seem to be working graphically at least.

  9. #9

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    Quote Originally Posted by jcqellis View Post
    Interestingly, after deleting the 4.16 kernel packages AND uninstalling all nvidia drivers from the official repo restores things to normal -- both monitors working at native 1080p.
    Sure, nouveau does support your card properly.
    Before, you were using fbdev though, because the installed nvidia driver does block/blacklist nouveau.

    However, upon reinstalling nvidia-gfxG04-kmp-default, the problem comes back - scaled down resolution on only one monitor.
    Sounds like nvidia is still not working.
    But let's keep kernel 4.16 out of the equation for now, as it's not going to work anyway.

    Here's the output after running `sudo zypper in -f nvidia-gfxG04-kmp-default`:

    Code:
    Additional rpm output:
    cat: write error: Broken pipe
    /usr/src/kernel-modules/nvidia-390.48-default /
    rm -f -r conftest
    make[1]: Entering directory '/usr/src/linux-4.15.13-1'
    make[2]: Entering directory '/usr/src/linux-4.15.13-1-obj/x86_64/default'
    make[2]: Leaving directory '/usr/src/linux-4.15.13-1-obj/x86_64/default'
    make[1]: Leaving directory '/usr/src/linux-4.15.13-1'
    /
    make: *** No rule to make target 'kernelrelease'.  Stop.
    make: Entering directory '/usr/src/linux-4.16.0-1-obj/x86_64/default'
    make: *** No rule to make target 'modules'.  Stop.                                                                                                                
    make: Leaving directory '/usr/src/linux-4.16.0-1-obj/x86_64/default'                                                                                              
    /usr/src/kernel-modules/nvidia-390.48-default /                                                                                                                   
    make[1]: *** /lib/modules//source: No such file or directory.  Stop.                                                                                              
    make: *** [Makefile:79: modules] Error 2
    The kernel module failed to compile now.
    For some reason the output is still referring to kernel 4.16.0...

    Did you uninstall all kernel 4.16.0 packages, i.e. also kernel-source, kernel-devel and kernel-default-devel? (sorry, I probably should have been more specific, but I though zypper would remove them anyway)
    If not, do that and try to reinstall the driver again.

  10. #10

    Default Re: Terminal login persists - new kernel, potential broken drivers or desktop manager

    So, going through yast, here's the list of kernel packages:

    kernel-default, kernel-default-devel, kernel-devel, kernel-source, kernel-syms, kernel-macros, kernel-firmware

    In red are the ones with version 4.15.13-1.5.

    In green are the ones with both version 4.15.13-1.5 and 4.15.13-1.7.

    kernel-syms is version 4.15.13-1.7 only.

    kernel-macros is version 4.16.0-1.5-noarch. I'm assuming I should get rid of this? However in doing so Yast asks me to resolve the conflict, either breaking dependencies or uninstalling every other kernel package.

    kernel-firmware is version 20180402-1.1-noarch. This came with the update for 4.16 too.

    Which should I get rid of before reinstalling nvidia drivers?

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •