Results 1 to 6 of 6

Thread: Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

  1. #1

    Default Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

    Как прогрузить микрокод (https://downloadmirror.intel.com/275...e-20180312.tgz) в CPU от Интел в ОС SLES11SP4?

  2. #2

    Default Re: Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

    Quote Originally Posted by eugene_str View Post
    Как прогрузить микрокод (https://downloadmirror.intel.com/275...e-20180312.tgz) в CPU от Интел в ОС SLES11SP4?
    обновить пакет kernel-firmware
    «Если не говорить пользователям, что линукс это сложно и страшно, то им совершенно все равно, в чем не разбираться. » — ЛОР

  3. #3

    Default Re: Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

    В общем, если есть подписка, то можно скачать c сайта https://download.suse.com/patch/finder/ и установить пакет microcode_ctl-1.17-102.83.15.1.src.rpm.

    # rpm -Uhv microcode_ctl-1.17-102.83.15.1.src.rpm

    # reboot

    Получаем:

    # dmesg | grep microcode[ 13.292403] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.350873] microcode: CPU0 updated to revision 0x2d, date = 2018-02-07
    [ 13.350884] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351205] microcode: CPU1 updated to revision 0x2d, date = 2018-02-07
    [ 13.351214] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351511] microcode: CPU2 updated to revision 0x2d, date = 2018-02-07
    [ 13.351547] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351866] microcode: CPU3 updated to revision 0x2d, date = 2018-02-07
    [ 13.351898] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

    Если подписки нет, то:

    # wget -P /tmp https://downloadmirror.intel.com/275...e-20180312.tgz

    # cd /tmp

    # mkdir firmware
    # cd firmware

    # tar xvf /tmp/microcode-20180312.tgz

    # cp -rv /tmp/firmware/microcode.dat /etc

    # cp -rv /tmp/firmware/intel-ucode/* /lib/firmware/intel-ucode/

    # microcode_ctl -u

    # mkinitrd

    Перезагрузим наш сервер:

    # reboot

    Получаем:

    # dmesg | grep microcode
    [ 13.292403] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.350873] microcode: CPU0 updated to revision 0x2d, date = 2018-02-07
    [ 13.350884] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351205] microcode: CPU1 updated to revision 0x2d, date = 2018-02-07
    [ 13.351214] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351511] microcode: CPU2 updated to revision 0x2d, date = 2018-02-07
    [ 13.351547] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351866] microcode: CPU3 updated to revision 0x2d, date = 2018-02-07
    [ 13.351898] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

  4. #4
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,822
    Blog Entries
    15

    Default Re: Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  5. #5

    Default Re: Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

    Ошибся немного, вместо пакета microcode_ctl-1.17-102.83.15.1.src.rpm, нужно установить пакет microcode_ctl-1.17-102.83.15.1.x86_64.rpm.

    Подправил ниже, может кому пригодится:

    Скачать c сайта https://download.suse.com/patch/finder/ и установить пакет microcode_ctl-1.17-102.83.15.1.x86_64.rpm.

    # rpm -Uhv microcode_ctl-1.17-102.83.15.1.x86_64.rpm

    # reboot

    Получаем:

    # dmesg | grep microcode[ 13.292403] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.292403] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.350873] microcode: CPU0 updated to revision 0x2d, date = 2018-02-07
    [ 13.350884] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351205] microcode: CPU1 updated to revision 0x2d, date = 2018-02-07
    [ 13.351214] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351511] microcode: CPU2 updated to revision 0x2d, date = 2018-02-07
    [ 13.351547] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351866] microcode: CPU3 updated to revision 0x2d, date = 2018-02-07
    [ 13.351898] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

    Если подписки нет, то:

    # wget -P /tmp https://downloadmirror.intel.com/275...e-20180312.tgz

    # cd /tmp

    # mkdir firmware
    # cd firmware

    # tar xvf /tmp/microcode-20180312.tgz

    # cp -rv /tmp/firmware/microcode.dat /etc

    # cp -rv /tmp/firmware/intel-ucode/* /lib/firmware/intel-ucode/

    # microcode_ctl -u

    # mkinitrd

    Перезагрузим наш сервер:

    # reboot

    Получаем:

    # dmesg | grep microcode
    [ 13.292403] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.350873] microcode: CPU0 updated to revision 0x2d, date = 2018-02-07
    [ 13.350884] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351205] microcode: CPU1 updated to revision 0x2d, date = 2018-02-07
    [ 13.351214] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351511] microcode: CPU2 updated to revision 0x2d, date = 2018-02-07
    [ 13.351547] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
    [ 13.351866] microcode: CPU3 updated to revision 0x2d, date = 2018-02-07
    [ 13.351898] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

  6. #6

    Default Re: Как прогрузить микрокод (microcode-20180312.tgz) в CPU от интел в ОС SLES11SP4

    Quote Originally Posted by malcolmlewis View Post
    A bad way for SLES11SP4!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •