Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 40

Thread: GUI blockiert, gnome-shell 100% CPU

  1. #11
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: AW: GUI blockiert, gnome-shell 100% CPU

    Quote Originally Posted by Sauerland View Post
    Hast du es mal mit dem G02-Nvidia Treiber versucht?
    Nein, das sagt mir nichts.

    In einer früheren Suse-Version hatte ich eine Zeitlang den proprietären Treiber direkt von Nvidia genutzt, weil nouveau noch keine vernünftige Dual-Monitor-Unterstützung hatte.
    Bei 13.x und Leap habe ich immer nur nouveau genutzt.

    Was ist der G02-Treiber? Wo bekomme ich den her? Ist der proprietär oder Open Source? Im Suse-Wiki finde ich dazu nichts.

  2. #12
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    4,024

    Default AW: GUI blockiert, gnome-shell 100% CPU


  3. #13
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: AW: GUI blockiert, gnome-shell 100% CPU

    Quote Originally Posted by Sauerland View Post
    Die Seite kenne ich, aber G02 ist da nirgends erwähnt.

  4. #14

    Default Re: AW: GUI blockiert, gnome-shell 100% CPU

    Quote Originally Posted by tilmanschmidt View Post
    Die Seite kenne ich, aber G02 ist da nirgends erwähnt.
    G02 ist einfach eine bestimmte "Generation" des proprietären NVidia Treibers, nämlich Version 304.xxx.

    Binde einfach das NVidia Repo ein und installiere den Treiber wie beschrieben, das sollte dann automatisch den G02 Treiber wählen.

    Die entsprechenden Pakete heißen eben nvidia-gfxG02-kmp-default, nvidia-computeG02 und x11-video-nvidiaG02 (im Gegensatz zu ...G03 und...G04 für die Versionen 340.xxx und 390.xxx für neuere Grafikkarten).

  5. #15
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: AW: GUI blockiert, gnome-shell 100% CPU

    Quote Originally Posted by wolfi323 View Post
    G02 ist einfach eine bestimmte "Generation" des proprietären NVidia Treibers, nämlich Version 304.xxx.

    Binde einfach das NVidia Repo ein und installiere den Treiber wie beschrieben, das sollte dann automatisch den G02 Treiber wählen.
    Ah, ok, danke für die Erläuterung.
    Dann werde ich das mal probieren.

  6. #16
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: GUI blockiert, gnome-shell 100% CPU

    Jetzt bin ich endlich dazu gekommen, den proprietären Treiber auszuprobieren.
    Ich bin gemäß der Anleitung zur manuellen Installation https://en.opensuse.org/SDB:NVIDIA_d...#openSUSE_Leap vorgegangen.
    Das Ergebnis ist kurz gesagt katastrophal.

    Schon beim Start steht die Maschine minutenlang mit schwarzem Bildschirm und hochdrehendem Lüfter, bis der Login-Bildschirm erscheint.
    Nach dem Login wieder minutenlang Volllast mit Mauszeiger auf schwarzem Bildschirm, dann erscheint kurz der Suse-Hintergrund, verschwindet wieder, erneut einige Minuten Volllast, bis der Desktop zum zweiten Mal erscheint und dann bleibt - jedenfalls solange ich nicht versuche etwas auf der Maschine zu machen.
    Der Versuch, die Bildschirmeinstellungen zu öffnen, führte aber direkt wieder zum Einfrieren des Desktops.
    Beim Wechsel auf die Textkonsole mit Alt/Strg/F1, um mit top zu schauen, was die Maschine so auslastet, stürzte dann die komplette X Session ab und ich hatte nach dem Zurückwechseln mit Alt/Strg/F7 wieder den Login-Bildschirm.

    /var/log/warn enthält einige irritierende Meldungen, die ich bisher noch nicht hatte:
    Code:
    2018-03-18T15:20:46.730649+01:00 xenon kernel: [   75.974678] NVRM: Your system is not currently configured to drive a VGA console
    2018-03-18T15:20:46.730674+01:00 xenon kernel: [   75.974683] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    2018-03-18T15:20:46.730678+01:00 xenon kernel: [   75.974685] NVRM: requires the use of a text-mode VGA console. Use of other console
    2018-03-18T15:20:46.730680+01:00 xenon kernel: [   75.974687] NVRM: drivers including, but not limited to, vesafb, may result in
    2018-03-18T15:20:46.730681+01:00 xenon kernel: [   75.974689] NVRM: corruption and stability problems, and is not supported.
    Code:
    2018-03-18T15:27:08.262732+01:00 xenon gnome-session-binary[4624]: WARNING: Application 'gsettings-data-convert.desktop' killed by signal 5
    2018-03-18T15:27:08.312133+01:00 xenon gnome-session-binary[4624]: WARNING: Application 'gsettings-data-convert.desktop' killed by signal 5
    2018-03-18T15:27:08.312643+01:00 xenon gnome-session-binary[4624]: WARNING: App 'gsettings-data-convert.desktop' respawning too quickly
    2018-03-18T15:27:08.313000+01:00 xenon gnome-session-binary[4624]: WARNING: Error on restarting session managed app: Component 'gsettings-data-convert.desktop' crashing too quickly
    Code:
    2018-03-18T15:22:24.478348+01:00 xenon gnome-session-binary[3606]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
    2018-03-18T15:23:14.722214+01:00 xenon kernel: [  223.964493] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
    2018-03-18T15:23:14.818239+01:00 xenon kernel: [  224.061191] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
    2018-03-18T15:23:50.206211+01:00 xenon kernel: [  259.450103] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
    2018-03-18T15:24:39.878223+01:00 xenon kernel: [  309.123677] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
    2018-03-18T15:24:45.786213+01:00 xenon kernel: [  315.028781] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
    2018-03-18T15:24:45.904207+01:00 xenon gnome-session-binary[3606]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
    2018-03-18T15:25:43.186230+01:00 xenon kernel: [  372.430779] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
    2018-03-18T15:25:43.285267+01:00 xenon gnome-session-binary[3606]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
    2018-03-18T15:25:43.285766+01:00 xenon gnome-session-binary[3606]: WARNING: App 'org.gnome.Shell.desktop' respawning too quickly
    In /var/log/Xorg.0.log.old findet sich am Ende vierundzwanzig Mal hintereinander die Meldungsfolge
    Code:
    [    89.244] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [    89.244] (II) NVIDIA(GPU-0):     Vision stereo.
    [    89.244] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    89.244] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [    89.244] (**) NVIDIA(0):     been enabled on all display devices.)
    [    89.322] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [    89.322] (II) NVIDIA(GPU-0):     Vision stereo.
    [    89.322] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    89.322] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [    89.322] (**) NVIDIA(0):     been enabled on all display devices.)
    (natürlich mit zunehmenden Zeitstempeln) gefolgt von
    Code:
    [   371.241] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
    [   371.508] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [   371.508] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [   371.509] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [   371.509] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [   371.565] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
    [   371.565] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
    [   371.566] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [   371.566] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [   372.858] (II) UnloadModule: "libinput"
    [   372.858] (II) UnloadModule: "libinput"
    [   372.858] (II) UnloadModule: "libinput"
    [   372.858] (II) UnloadModule: "libinput"
    [   373.639] (II) Server terminated successfully (0). Closing log file.
    In /var/log/gdm/:0-greeter.log fand ich noch:
    Code:
    ** (gnome-settings-daemon:4307): WARNING **: Schemas 'org.gnome.desktop.a11y' has not been setup
    
    (gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation
    
    
    (gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation
    
    
    (gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation
    
    
    (gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation
    
    
    (gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation
    
    
    (gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-framebuffer-gl.c:1022: GL error (1282): Invalid operation
    
    
    (gnome-settings-daemon:4307): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon: Verbindung ist geschlossen
    
    (gnome-settings-daemon:4307): GLib-GIO-WARNING **: Invalid id 4 passed to g_bus_unown_name()
    gnome-session-binary[4282]: WARNING: Lost name on bus: org.gnome.SessionManager
    Aktuell ist die Maschine per Textkonsole oder ssh normal benutzbar, die X-Oberfläche ist unbrauchbar.

    Gibt es irgendetwas, was ich noch ausprobieren sollte, oder gehe ich besser gleich auf Nouveau zurück?

  7. #17
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: GUI blockiert, gnome-shell 100% CPU

    Nachtrag: in ~/.xsession-errors-:0 habe ich jetzt mehrfach
    Code:
    (gnome-shell:5019): Gdk-ERROR **: The program 'gnome-shell' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadMatch (invalid parameter attributes)'.
      (Details: serial 1787 error_code 8 request_code 134 (SYNC) minor_code 16)
      (Note to programmers: normally, X errors are reported asynchronously;
       that is, you will receive the error a while after causing it.
       To debug your program, run it with the GDK_SYNCHRONIZE environment
       variable to change this behavior. You can then get a meaningful
       backtrace from your debugger if you break on the gdk_x_error() function.)
    gnome-session-binary[4624]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
    Meiner Erinnerung nach stand das vor dem Wechsel auf den proprietären Treiber da nicht.

  8. #18
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    4,024

    Default AW: GUI blockiert, gnome-shell 100% CPU

    Poste die komplette /var/log/Xorg.0.log
    Evtl. als Anhang in einer normalen Textdatei.

  9. #19
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: GUI blockiert, gnome-shell 100% CPU

    Die Forumssoftware sagt mir leider:
    You may not post attachments

    Wenn ich die komplette /var/log/Xorg.0.log hier hereinpaste, sagt sie mir:
    The text that you have entered is too long (31627 characters). Please shorten it to 15000 characters long.

    Hier also der erste Teil. Rest folgt.
    Code:
    [   373.741]
    X.Org X Server 1.18.3
    Release Date: 2016-04-04
    [   373.741] X Protocol Version 11, Revision 0
    [   373.741] Build Operating System: openSUSE SUSE LINUX
    [   373.741] Current Operating System: Linux xenon 4.4.114-42-default #1 SMP Tue Feb 6 10:58:10 UTC 2018 (b6ee9ae) x86_64
    [   373.741] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.114-42-default root=/dev/mapper/RAID-root resume=/dev/RAID/swap showopts splash=verbose
    [   373.741] Build Date: 14 March 2018  10:01:54PM
    [   373.741]
    [   373.741] Current version of pixman: 0.34.0
    [   373.741]    Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    [   373.741] Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [   373.741] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 18 15:25:44 2018
    [   373.742] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [   373.742] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [   373.743] (==) No Layout section.  Using the first Screen section.
    [   373.743] (==) No screen section available. Using defaults.
    [   373.743] (**) |-->Screen "Default Screen Section" (0)
    [   373.743] (**) |   |-->Monitor "<default monitor>"
    [   373.743] (==) No monitor specified for screen "Default Screen Section".
            Using a default monitor configuration.
    [   373.743] (==) Automatically adding devices
    [   373.743] (==) Automatically enabling devices
    [   373.743] (==) Automatically adding GPU devices
    [   373.743] (==) Max clients allowed: 256, resource mask: 0x1fffff
    [   373.743] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    [   373.743]    Entry deleted from font path.
    [   373.743] (==) FontPath set to:
            /usr/share/fonts/misc:unscaled,
            /usr/share/fonts/Type1/,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/ghostscript/,
            /usr/share/fonts/cyrillic:unscaled,
            /usr/share/fonts/truetype/,
            built-ins
    [   373.744] (==) ModulePath set to "/usr/lib64/xorg/modules"
    [   373.744] (**) Extension "XFree86-DGA" is disabled
    [   373.744] (II) The server relies on udev to provide the list of input devices.
            If no devices become available, reconfigure udev or disable AutoAddDevices.
    [   373.744] (II) Loader magic: 0x80cce0
    [   373.744] (II) Module ABI versions:
    [   373.744]    X.Org ANSI C Emulation: 0.4
    [   373.744]    X.Org Video Driver: 20.0
    [   373.744]    X.Org XInput driver : 22.1
    [   373.744]    X.Org Server Extension : 9.0
    [   373.750] (++) using VT number 7
    
    [   373.750] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
    [   373.751] (II) xfree86: Adding drm device (/dev/dri/card0)
    [   373.754] (--) PCI:*(0:1:0:0) 10de:0161:107d:56c4 rev 161, Mem @ 0xe1000000/16777216, 0xd0000000/268435456, 0xe0000000/16777216
    [   373.754] (II) LoadModule: "glx"
    [   373.755] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
    [   373.785] (II) Module glx: vendor="NVIDIA Corporation"
    [   373.785]    compiled for 4.0.2, module version = 1.0.0
    [   373.785]    Module class: X.Org Server Extension
    [   373.785] (II) NVIDIA GLX Module  304.137  Thu Sep 14 14:12:52 PDT 2017
    [   373.785] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
    [   373.786] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
    [   373.786] (==) Matched nvidia as autoconfigured driver 0
    [   373.786] (==) Matched nouveau as autoconfigured driver 1
    [   373.786] (==) Matched nv as autoconfigured driver 2
    [   373.786] (==) Matched nvidia as autoconfigured driver 3
    [   373.786] (==) Matched nouveau as autoconfigured driver 4
    [   373.786] (==) Matched nv as autoconfigured driver 5
    [   373.786] (==) Matched modesetting as autoconfigured driver 6
    [   373.786] (==) Matched fbdev as autoconfigured driver 7
    [   373.786] (==) Matched vesa as autoconfigured driver 8
    [   373.786] (==) Assigned the driver to the xf86ConfigLayout
    [   373.786] (II) LoadModule: "nvidia"
    [   373.786] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
    [   373.787] (II) Module nvidia: vendor="NVIDIA Corporation"
    [   373.788]    compiled for 4.0.2, module version = 1.0.0
    [   373.788]    Module class: X.Org Video Driver
    [   373.790] (II) LoadModule: "nouveau"
    [   373.790] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
    [   373.790] (II) Module nouveau: vendor="X.Org Foundation"
    [   373.791]    compiled for 1.18.3, module version = 1.0.15
    [   373.791]    Module class: X.Org Video Driver
    [   373.791]    ABI class: X.Org Video Driver, version 20.0
    [   373.791] (II) LoadModule: "nv"
    [   373.791] (WW) Warning, couldn't open module nv
    [   373.791] (II) UnloadModule: "nv"
    [   373.791] (II) Unloading nv
    [   373.791] (EE) Failed to load module "nv" (module does not exist, 0)
    [   373.792] (II) LoadModule: "modesetting"
    [   373.792] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
    [   373.792] (II) Module modesetting: vendor="X.Org Foundation"
    [   373.792]    compiled for 1.18.3, module version = 1.18.3
    [   373.792]    Module class: X.Org Video Driver
    [   373.792]    ABI class: X.Org Video Driver, version 20.0
    [   373.792] (II) LoadModule: "fbdev"
    [   373.793] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
    [   373.793] (II) Module fbdev: vendor="X.Org Foundation"
    [   373.793]    compiled for 1.18.3, module version = 0.4.4
    [   373.793]    Module class: X.Org Video Driver
    [   373.793]    ABI class: X.Org Video Driver, version 20.0
    [   373.793] (II) LoadModule: "vesa"
    [   373.793] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
    [   373.793] (II) Module vesa: vendor="X.Org Foundation"
    [   373.793]    compiled for 1.18.3, module version = 2.3.4
    [   373.793]    Module class: X.Org Video Driver
    [   373.794]    ABI class: X.Org Video Driver, version 20.0
    [   373.794] (II) NVIDIA dlloader X Driver  304.137  Thu Sep 14 13:52:41 PDT 2017
    [   373.794] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [   373.794] (II) NOUVEAU driver
    [   373.794] (II) NOUVEAU driver for NVIDIA chipset families :
    [   373.794]    RIVA TNT        (NV04)
    [   373.794]    RIVA TNT2       (NV05)
    [   373.794]    GeForce 256     (NV10)
    [   373.794]    GeForce 2       (NV11, NV15)
    [   373.794]    GeForce 4MX     (NV17, NV18)
    [   373.795]    GeForce 3       (NV20)
    [   373.795]    GeForce 4Ti     (NV25, NV28)
    [   373.795]    GeForce FX      (NV3x)
    [   373.795]    GeForce 6       (NV4x)
    [   373.795]    GeForce 7       (G7x)
    [   373.795]    GeForce 8       (G8x)
    [   373.795]    GeForce GTX 200 (NVA0)
    [   373.796]    GeForce GTX 400 (NVC0)
    [   373.796] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [   373.796] (II) FBDEV: driver for framebuffer: fbdev
    [   373.796] (II) VESA: driver for VESA chipsets: vesa
    [   373.796] (II) Loading sub module "fb"
    [   373.796] (II) LoadModule: "fb"
    [   373.796] (II) Loading /usr/lib64/xorg/modules/libfb.so
    [   373.797] (II) Module fb: vendor="X.Org Foundation"
    [   373.797]    compiled for 1.18.3, module version = 1.0.0
    [   373.797]    ABI class: X.Org ANSI C Emulation, version 0.4
    [   373.797] (II) Loading sub module "wfb"
    [   373.797] (II) LoadModule: "wfb"
    [   373.797] (II) Loading /usr/lib64/xorg/modules/libwfb.so
    [   373.798] (II) Module wfb: vendor="X.Org Foundation"
    [   373.798]    compiled for 1.18.3, module version = 1.0.0
    [   373.798]    ABI class: X.Org ANSI C Emulation, version 0.4
    [   373.798] (II) Loading sub module "ramdac"
    [   373.798] (II) LoadModule: "ramdac"
    [   373.798] (II) Module "ramdac" already built-in
    [   373.798] (WW) Falling back to old probe method for modesetting
    [   373.798] (WW) Falling back to old probe method for fbdev
    [   373.798] (II) Loading sub module "fbdevhw"
    [   373.798] (II) LoadModule: "fbdevhw"
    [   373.799] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
    [   373.799] (II) Module fbdevhw: vendor="X.Org Foundation"
    [   373.799]    compiled for 1.18.3, module version = 0.0.2
    [   373.799]    ABI class: X.Org Video Driver, version 20.0
    [   373.799] (WW) Falling back to old probe method for vesa
    [   373.799] (II) NVIDIA(0): Creating default Display subsection in Screen section
            "Default Screen Section" for depth/fbbpp 24/32
    [   373.799] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [   373.799] (==) NVIDIA(0): RGB weight 888
    [   373.799] (==) NVIDIA(0): Default visual is TrueColor
    [   373.799] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [   373.800] (**) NVIDIA(0): Enabling 2D acceleration
    [   374.432] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   374.432] (II) NVIDIA(GPU-0):     Vision stereo.
    [   374.514] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   374.514] (II) NVIDIA(GPU-0):     Vision stereo.
    [   374.517] (II) NVIDIA(0): NVIDIA GPU GeForce 6200 TurboCache(TM) (NV44) at PCI:1:0:0
    [   374.517] (II) NVIDIA(0):     (GPU-0)
    [   374.517] (--) NVIDIA(0): Memory: 131072 kBytes
    [   374.517] (--) NVIDIA(0): VideoBIOS: 05.44.02.15.07
    [   374.517] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [   374.518] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [   374.518] (--) NVIDIA(0): Valid display device(s) on GeForce 6200 TurboCache(TM) at PCI:1:0:0
    [   374.518] (--) NVIDIA(0):     CRT-0
    [   374.518] (--) NVIDIA(0):     CRT-1
    [   374.518] (--) NVIDIA(0):     TV-0
    [   374.518] (--) NVIDIA(0):     Philips 220SW (DFP-0) (connected)
    [   374.518] (--) NVIDIA(0):     Acer AL1721 (DFP-1) (connected)
    [   374.518] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [   374.518] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [   374.518] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [   374.518] (--) NVIDIA(0): TV encoder: Unknown
    [   374.518] (--) NVIDIA(0): Philips 220SW (DFP-0): 155.0 MHz maximum pixel clock
    [   374.518] (--) NVIDIA(0): Philips 220SW (DFP-0): Internal Single Link TMDS
    [   374.518] (--) NVIDIA(0): Acer AL1721 (DFP-1): 155.0 MHz maximum pixel clock
    [   374.518] (--) NVIDIA(0): Acer AL1721 (DFP-1): Internal Single Link TMDS
    [   374.518] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   374.518] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   374.518] (**) NVIDIA(0):     been enabled on all display devices.)
    [   374.519] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   374.519] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   374.519] (**) NVIDIA(0):     been enabled on all display devices.)
    [   374.519] (==) NVIDIA(0):
    [   374.519] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [   374.519] (==) NVIDIA(0):     will be used as the requested mode.
    [   374.519] (==) NVIDIA(0):
    [   374.519] (II) NVIDIA(0): Validated MetaModes:
    [   374.519] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
    [   374.519] (II) NVIDIA(0): Virtual screen size determined to be 2960 x 1050
    [   374.522] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
    [   374.522] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
    [   374.523] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
    [   374.523] (--) NVIDIA(0):     option
    [   374.523] (II) UnloadModule: "nouveau"
    [   374.523] (II) Unloading nouveau
    [   374.524] (II) UnloadModule: "modesetting"
    [   374.524] (II) Unloading modesetting
    [   374.524] (II) UnloadModule: "fbdev"
    [   374.524] (II) Unloading fbdev
    [   374.524] (II) UnloadSubModule: "fbdevhw"
    [   374.524] (II) Unloading fbdevhw
    [   374.524] (II) UnloadModule: "vesa"
    [   374.524] (II) Unloading vesa
    [   374.524] (--) Depth 24 pixmap format is 32 bpp
    [   374.535] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
    [   374.834] (==) NVIDIA(0): Disabling shared memory pixmaps
    [   374.834] (==) NVIDIA(0): Backing store enabled
    [   374.834] (==) NVIDIA(0): Silken mouse enabled
    [   374.835] (==) NVIDIA(0): DPMS enabled
    [   374.836] (II) Loading sub module "dri2"
    [   374.836] (II) LoadModule: "dri2"
    [   374.836] (II) Module "dri2" already built-in
    [   374.836] (II) NVIDIA(0): [DRI2] Setup complete
    [   374.836] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
    [   374.836] (--) RandR disabled
    [   374.846] (II) Initializing extension GLX
    [   374.846] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event2)
    [   375.012] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [   375.012] (**) Power Button: Applying InputClass "system-keyboard"
    [   375.012] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [   375.012] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [   375.012] (II) LoadModule: "libinput"
    [   375.012] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
    [   375.015] (II) Module libinput: vendor="X.Org Foundation"
    [   375.015]    compiled for 1.18.3, module version = 0.25.1
    [   375.015]    Module class: X.Org XInput Driver
    [   375.015]    ABI class: X.Org XInput driver, version 22.1
    [   375.015] (II) Using input driver 'libinput' for 'Power Button'
    [   375.015] (**) Power Button: always reports core events
    [   375.015] (**) Option "Device" "/dev/input/event2"
    [   375.015] (**) Option "_source" "server/udev"
    [   375.016] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [   375.016] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [   375.032] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [   375.032] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [   375.032] (**) Option "xkb_model" "pc105"
    [   375.032] (**) Option "xkb_layout" "de"
    [   375.032] (**) Option "xkb_variant" "nodeadkeys"
    [   375.032] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [   375.081] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [   375.081] (II) input device 'Power Button', /dev/input/event2 is a keyboard

  10. #20
    Join Date
    Jun 2008
    Location
    Bonn, Germany
    Posts
    63

    Default Re: GUI blockiert, gnome-shell 100% CPU

    Weiter geht's:
    Code:
    [   375.083] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [   375.083] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [   375.083] (**) Sleep Button: Applying InputClass "system-keyboard"
    [   375.083] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [   375.083] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
    [   375.083] (II) Using input driver 'libinput' for 'Sleep Button'
    [   375.083] (**) Sleep Button: always reports core events
    [   375.083] (**) Option "Device" "/dev/input/event1"
    [   375.083] (**) Option "_source" "server/udev"
    [   375.085] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [   375.085] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [   375.096] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
    [   375.096] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
    [   375.096] (**) Option "xkb_model" "pc105"
    [   375.096] (**) Option "xkb_layout" "de"
    [   375.096] (**) Option "xkb_variant" "nodeadkeys"
    [   375.096] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [   375.097] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [   375.097] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [   375.099] (II) config/udev: Adding input device HID 413c:3010 (/dev/input/event3)
    [   375.099] (**) HID 413c:3010: Applying InputClass "evdev pointer catchall"
    [   375.099] (**) HID 413c:3010: Applying InputClass "evdev pointer catchall"
    [   375.099] (**) HID 413c:3010: Applying InputClass "libinput pointer catchall"
    [   375.099] (II) Using input driver 'libinput' for 'HID 413c:3010'
    [   375.099] (**) HID 413c:3010: always reports core events
    [   375.099] (**) Option "Device" "/dev/input/event3"
    [   375.099] (**) Option "_source" "server/udev"
    [   375.157] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
    [   375.157] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
    [   375.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:413C:3010.0001/input/input3/event3"
    [   375.220] (II) XINPUT: Adding extended input device "HID 413c:3010" (type: MOUSE, id 8)
    [   375.220] (**) Option "AccelerationScheme" "none"
    [   375.220] (**) HID 413c:3010: (accel) selected scheme none/0
    [   375.221] (**) HID 413c:3010: (accel) acceleration factor: 2.000
    [   375.221] (**) HID 413c:3010: (accel) acceleration threshold: 4
    [   375.277] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
    [   375.277] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
    [   375.279] (II) config/udev: Adding input device HID 413c:3010 (/dev/input/mouse0)
    [   375.279] (II) No input driver specified, ignoring this device.
    [   375.279] (II) This device may have been added with another device file.
    [   375.280] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [   375.280] (II) No input driver specified, ignoring this device.
    [   375.280] (II) This device may have been added with another device file.
    [   375.282] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
    [   375.282] (II) No input driver specified, ignoring this device.
    [   375.282] (II) This device may have been added with another device file.
    [   375.283] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
    [   375.283] (II) No input driver specified, ignoring this device.
    [   375.283] (II) This device may have been added with another device file.
    [   375.284] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event8)
    [   375.284] (II) No input driver specified, ignoring this device.
    [   375.284] (II) This device may have been added with another device file.
    [   375.285] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
    [   375.285] (II) No input driver specified, ignoring this device.
    [   375.286] (II) This device may have been added with another device file.
    [   375.287] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
    [   375.287] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
    [   375.287] (**) AT Translated Set 2 keyboard: always reports core events
    [   375.287] (**) Option "Device" "/dev/input/event0"
    [   375.287] (**) Option "_source" "server/udev"
    [   375.288] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [   375.288] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [   375.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [   375.308] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [   375.308] (**) Option "xkb_model" "pc105"
    [   375.308] (**) Option "xkb_layout" "de"
    [   375.308] (**) Option "xkb_variant" "nodeadkeys"
    [   375.308] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [   375.310] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [   375.310] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [   375.311] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [   375.311] (II) No input driver specified, ignoring this device.
    [   375.311] (II) This device may have been added with another device file.
    [   376.978] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   376.978] (II) NVIDIA(GPU-0):     Vision stereo.
    [   376.978] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   376.979] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   376.979] (**) NVIDIA(0):     been enabled on all display devices.)
    [   377.056] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   377.056] (II) NVIDIA(GPU-0):     Vision stereo.
    [   377.056] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   377.056] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   377.056] (**) NVIDIA(0):     been enabled on all display devices.)
    [   377.240] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   377.240] (II) NVIDIA(GPU-0):     Vision stereo.
    [   377.241] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   377.241] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   377.241] (**) NVIDIA(0):     been enabled on all display devices.)
    [   377.318] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   377.318] (II) NVIDIA(GPU-0):     Vision stereo.
    [   377.318] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   377.318] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   377.318] (**) NVIDIA(0):     been enabled on all display devices.)
    [   380.184] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   380.184] (II) NVIDIA(GPU-0):     Vision stereo.
    [   380.184] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   380.184] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   380.184] (**) NVIDIA(0):     been enabled on all display devices.)
    [   380.265] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   380.265] (II) NVIDIA(GPU-0):     Vision stereo.
    [   380.265] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   380.265] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   380.265] (**) NVIDIA(0):     been enabled on all display devices.)
    [   398.907] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
    [   399.182] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [   399.183] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [   399.184] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [   399.184] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [   399.241] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
    [   399.241] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
    [   399.242] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [   399.242] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [   444.427] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
    [   444.704] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [   444.704] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [   444.705] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [   444.705] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [   444.761] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
    [   444.761] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
    [   444.762] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [   444.762] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [   454.734] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   454.734] (II) NVIDIA(GPU-0):     Vision stereo.
    [   454.734] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   454.734] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   454.734] (**) NVIDIA(0):     been enabled on all display devices.)
    [   454.811] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   454.811] (II) NVIDIA(GPU-0):     Vision stereo.
    [   454.811] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   454.811] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   454.811] (**) NVIDIA(0):     been enabled on all display devices.)
    [   455.003] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   455.003] (II) NVIDIA(GPU-0):     Vision stereo.
    [   455.003] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   455.003] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   455.003] (**) NVIDIA(0):     been enabled on all display devices.)
    [   455.080] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   455.080] (II) NVIDIA(GPU-0):     Vision stereo.
    [   455.080] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   455.080] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   455.081] (**) NVIDIA(0):     been enabled on all display devices.)
    [   457.848] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   457.848] (II) NVIDIA(GPU-0):     Vision stereo.
    [   457.848] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   457.848] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   457.848] (**) NVIDIA(0):     been enabled on all display devices.)
    [   457.930] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   457.930] (II) NVIDIA(GPU-0):     Vision stereo.
    [   457.930] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   457.930] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   457.930] (**) NVIDIA(0):     been enabled on all display devices.)
    [   519.511] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   519.512] (II) NVIDIA(GPU-0):     Vision stereo.
    [   519.512] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   519.512] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   519.512] (**) NVIDIA(0):     been enabled on all display devices.)
    [   519.589] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   519.589] (II) NVIDIA(GPU-0):     Vision stereo.
    [   519.589] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   519.589] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   519.589] (**) NVIDIA(0):     been enabled on all display devices.)
    [   519.778] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   519.778] (II) NVIDIA(GPU-0):     Vision stereo.
    [   519.778] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   519.778] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   519.778] (**) NVIDIA(0):     been enabled on all display devices.)
    [   519.856] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   519.856] (II) NVIDIA(GPU-0):     Vision stereo.
    [   519.856] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   519.856] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   519.856] (**) NVIDIA(0):     been enabled on all display devices.)
    [   522.129] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    [   522.129] (II) NVIDIA(GPU-0):     Vision stereo.
    [   522.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   522.129] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    [   522.129] (**) NVIDIA(0):     been enabled on all display devices.)
    [   522.206] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    [   522.206] (II) NVIDIA(GPU-0):     Vision stereo.
    [   522.207] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   522.207] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    [   522.207] (**) NVIDIA(0):     been enabled on all display devices.)
    Hat immer noch nicht ganz gepasst, aber der Rest sind nur weitere Wiederholungen der letzten 10 Zeilen mit neuen Timestamps.

Page 2 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •