Results 1 to 2 of 2

Thread: Bumblebee issue with Opensuse leap 42.3

  1. #1

    Default Bumblebee issue with Opensuse leap 42.3

    Hello,
    I have installed and configured bumblebee but it is working only with nouveau driver and when using official driver from nvidia I get this error.
    My goal is to use CUDA so I need nvidia driver.

    Code:
    [ 1856.825074] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
    
    [ 1856.825110] [ERROR]Aborting because fallback start is disabled.
    Note:
    I have opensuse leap 42.3
    Nvidia GTX950M
    I have this package for nvidia driver


    • nvidia-bumblebee-352.63-2.1.x86_64
    • nvidia-gfxG04-kmp-default-384.111_k4.4.76_1-3.1.x86_64
    • nvidia-glG04-384.111-3.1.x86_64
    • I have also nouveau driver and bumblebee packages

    I don't know if this problem is related but when I use nouveau driver I get a lower fps.
    Code:
    optirun glxspheres
    Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
    Visual ID of window: 0x20
    Context is Direct
    OpenGL Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
    35.703037 frames/sec - 32.362661 Mpixels/sec
    36.195262 frames/sec - 32.808833 Mpixels/sec
    glxspheres
    Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
    Visual ID of window: 0xb3
    Context is Direct
    OpenGL Renderer: Mesa DRI Intel(R) Haswell Mobile 
    60.545201 frames/sec - 54.880592 Mpixels/sec
    60.040112 frames/sec - 54.422759 Mpixels/sec
    this is bumblebee configuration file
    Code:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=true
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=nouveau
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib64/primus:/usr/lib/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    
    
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    #         bbswitch - new in BB 3, recommended if available
    #       switcheroo - vga_switcheroo method, use at your own risk
    #             none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/X11R6/lib64:/usr/X11R6/lib
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib64/nvidia/xorg/modules,/usr/lib64/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

    Thank you

  2. #2

    Talking Re: Bumblebee issue with Opensuse leap 42.3

    Hello,

    Now everything is working I just deleted all the driver and bumblebee.

    In my case I thing the package nvidia-bumblebee was causing the problem. After some times I notice that this package is related to Tumbleweed

    So if you have this package try to delete it.

    Pay attention, if you do this
    carefully you can break the X server. when you delete the nvidia-bumblebee package there are other package that you should install in my case after deleting all nvidia related package including nouveau(which is an opensource driver for nvidia GPU That I don't know why did they made it) I did zypper up and recommended package check.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •