Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Unable to do any updates on Leap 42.3

  1. #1

    Default Unable to do any updates on Leap 42.3

    More or less fresh install of openSUSE 42.3 but unused for about 3 to 4 months.
    When I boot up, package kit would start running automatically and stay for hours on "Checking updates".

    Killed package kit using:
    Code:
    sudo killall packagekitd
    Then tried using Yast online update. It gets stuck on "Loading Package Manager".

    Tried
    Code:
    zypper update
    Absolutely no output.

    Checked repository URL's and enabled/autorefresh only the basic four repositories. Retried Yast and zypper. Same results.

    Changed network management from "wicked" to NetworkManager as suggested in another thread. No effect.

    Now if I try to enter Yast - Software repositories (this is after logging out and logging in again after Yast gets stuck), I get:
    "System management is locked by the application with pid 20039 (/usr/bin/ruby). Close this application before trying again.
    The only ruby I've heard of (other than the gemstone and the one who took her lips to town) is a programming language and I've never ever used it.

    Before, installing openSUSE 42.3, I had briefly installed 42.2 (or perhaps 42.1) I cant remember and had similar problems with updates - which was solved by adding an omitted file separator in the URL for the nvidia repo (unbelievable but true and I had not even entered the URL manually).

    There are times perhaps when the repos are not available but this has now happened multiple times over several days.

    I successfully (and continuously) used openSUSE 13.1 for over two years - only having to use my Windows 7 system once in the middle after a power failure messed up an update. But after 9/10 months of trying on and off, I have yet to open my account with Leap - there is always some problem or the other and the GUI is laggy and "just doesn't feel right".

    I'd be grateful if anyone can help.

  2. #2
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,820

    Default AW: Unable to do any updates on Leap 42.3

    Do you have Intsernet?
    Does
    Code:
    ping -c3 8.8.8.8
    shows anything?


    Also:
    Code:
    ping -c3 google.com
    Post:
    Code:
    zypper -vvv up

  3. #3

    Default Re: Unable to do any updates on Leap 42.3

    Rebooted. So starting from a clean slate.

    Internet seems fine. I'm posting from leap 42.3

    Code:
    ping -c3 8.8.8.8
    gives

    Code:
    PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
    64 bytes from 8.8.8.8: icmp_seq=1 ttl=47 time=40.9 ms
    64 bytes from 8.8.8.8: icmp_seq=2 ttl=47 time=40.9 ms
    64 bytes from 8.8.8.8: icmp_seq=3 ttl=47 time=40.9 ms
    
    --- 8.8.8.8 ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 2002ms
    rtt min/avg/max/mdev = 40.969/40.988/40.999/0.234 ms
    Code:
    zypper -vvv up
    shows (up to now - after abt 3 mins)
    Code:
    Verbosity: 3
    Initializing Target
    Checking whether to refresh metadata for openSUSE-Leap-42.3-Non-Oss
    Also now "Software Updates" on the taskbar shows "Your system is offline"

  4. #4
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,588
    Blog Entries
    14

    Default Re: Unable to do any updates on Leap 42.3

    Quote Originally Posted by emeskay View Post

    Also now "Software Updates" on the taskbar shows "Your system is offline"
    A laptop with Networkmanager? I.e. packagekit trying to check before the networkconnection is fully establised?
    Also, show output of
    Code:
    zypper lr -d
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  5. #5

    Default Re: Unable to do any updates on Leap 42.3

    Actually it is a desktop running on a quad core llano.

    Code:
    zypper lr -d
    gives:
    Code:
    #  | Alias                     | Name                                    | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                      | Service
    ---+---------------------------+-----------------------------------------+---------+-----------+---------+----------+--------+--------------------------------------------------------------------------+--------
     1 | download.nvidia.com-leap  | nVidia Graphics Drivers                 | No      | ----      | ----    |   99     | rpm-md | https://download.nvidia.com/opensuse/leap/42.3/                          |        
     2 | openSUSE-Leap-42.3-0      | openSUSE-Leap-42.3-0                    | No      | ----      | ----    |   99     | yast2  | cd:///?devices=/dev/disk/by-id/ata-HL-DT-ST_DVDRAM_GH24NS72_K2HC3UD5515  |        
     3 | repo-debug                | openSUSE-Leap-42.3-Debug                | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distribution/leap/42.3/repo/oss/      |        
     4 | repo-debug-non-oss        | openSUSE-Leap-42.3-Debug-Non-Oss        | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distribution/leap/42.3/repo/non-oss/  |        
     5 | repo-debug-update         | openSUSE-Leap-42.3-Update-Debug         | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/leap/42.3/oss/                 |        
     6 | repo-debug-update-non-oss | openSUSE-Leap-42.3-Update-Debug-Non-Oss | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/leap/42.3/non-oss/             |        
     7 | repo-non-oss              | openSUSE-Leap-42.3-Non-Oss              | Yes     | (r ) Yes  | Yes     |   99     | yast2  | http://download.opensuse.org/distribution/leap/42.3/repo/non-oss/        |        
     8 | repo-oss                  | openSUSE-Leap-42.3-Oss                  | Yes     | (r ) Yes  | Yes     |   99     | yast2  | http://download.opensuse.org/distribution/leap/42.3/repo/oss/            |        
     9 | repo-source               | openSUSE-Leap-42.3-Source               | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/42.3/repo/oss/     |        
    10 | repo-source-non-oss       | openSUSE-Leap-42.3-Source-Non-Oss       | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/42.3/repo/non-oss/ |        
    11 | repo-update               | openSUSE-Leap-42.3-Update               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/42.3/oss/                       |        
    12 | repo-update-non-oss       | openSUSE-Leap-42.3-Update-Non-Oss       | Yes     | (r ) Yes  | No      |   99     | rpm-md | http://download.opensuse.org/update/leap/42.3/non-oss/                   |

  6. #6
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,588
    Blog Entries
    14

    Default Re: Unable to do any updates on Leap 42.3

    Remove repo nr. 2, it points to the install medium. Then open a terminal window and do
    Code:
    sudo zypper ref && sudo zypper up
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  7. #7

    Default Re: Unable to do any updates on Leap 42.3

    Code:
    sudo zypper ref && sudo zypper up
    No response from zypper as before.
    In any case the install medium was completely disabled.

    Also, note that I'm on a wired internet connection.

  8. #8
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,820

    Default AW: Unable to do any updates on Leap 42.3

    Code:
    ping -c3 google.com
    is missing.

  9. #9

    Default Re: Unable to do any updates on Leap 42.3

    Code:
    ping -c3 google.com
    Code:
    PING google.com (172.217.160.142) 56(84) bytes of data.
    64 bytes from maa03s29-in-f14.1e100.net (172.217.160.142): icmp_seq=1 ttl=51 time=39.2 ms
    64 bytes from maa03s29-in-f14.1e100.net (172.217.160.142): icmp_seq=2 ttl=51 time=39.2 ms
    64 bytes from maa03s29-in-f14.1e100.net (172.217.160.142): icmp_seq=3 ttl=51 time=39.2 ms
    
    --- google.com ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 2003ms
    rtt min/avg/max/mdev = 39.205/39.236/39.259/0.022 ms

  10. #10
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,588
    Blog Entries
    14

    Default Re: Unable to do any updates on Leap 42.3

    And .....
    Code:
    ping download.opensuse.org
    and ...
    Code:
    zypper clean && zypper ref
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •