**NOTE** January 2022 - Changes to Gstreamer and Pipewire packages from PackmanPlease read the following thread about the current changes
-
 SIM-card not recognized
When I insert a SIM-card on my Lenovo Thinkpad x1 carbon, it doesn't recognized the SIM-card. The SIM-card does work on my phone.
Do I need to enable/install something or does the OS not support SIM-card?
-
Re: SIM-card not recognized
 Originally Posted by kFelix
When I insert a SIM-card on my Lenovo Thinkpad x1 carbon, it doesn't recognized the SIM-card. The SIM-card does work on my phone.
Do I need to enable/install something or does the OS not support SIM-card?
It's the broadband modem device itself that needs to be considered here. To start with let's see how it is reported...
It's likely that using a more recent kernel will be required in order for the kernel to support it, and there may still be other issues to getting it handled properly. If you want to try this, follow the instructions I provided in this post. When you reboot, you'll be able to choose the desired kernel from the advanced options in the grub menu.
FWIW, an Ubuntu thread discussing similar...
https://forums.lenovo.com/t5/Linux-D...4/td-p/3720487
Last edited by deano_ferrari; 02-Dec-2017 at 00:19.
-
Re: SIM-card not recognized
Originally Posted by deano_ferrari
It's the broadband modem device itself that needs to be considered here. To start with let's see how it is reported...
It's likely that using a more recent kernel will be required in order for the kernel to support it, and there may still be other issues to getting it handled properly. If you want to try this, follow the instructions I provided in this post. When you reboot, you'll be able to choose the desired kernel from the advanced options in the grub menu.
FWIW, an Ubuntu thread discussing similar...
https://forums.lenovo.com/t5/Linux-D...4/td-p/3720487
Hi, sorry for the late answer but i already had that rep, don't think that kernel is the problem. Not sure but, I am not using any usb devices for the SIM-card is more like a port. Anyway, this is what i get from lsusb and usb-devices:
Code:
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 04f2:b45d Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 8087:0a2a Intel Corp.
Bus 002 Device 002: ID 138a:0017 Validity Sensors, Inc. Fingerprint Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.14
S: Manufacturer=Linux 4.14.2-1-default ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=8001 Rev=00.03
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=11
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.14
S: Manufacturer=Linux 4.14.2-1-default xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=11 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=138a ProdID=0017 Rev=00.78
S: SerialNumber=d6fdfbaa07be
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
T: Bus=02 Lev=01 Prnt=01 Port=06 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0a2a Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
T: Bus=02 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b45d Rev=00.29
S: Manufacturer=Chicony Electronics Co.,Ltd.
S: Product=Integrated Camera
S: SerialNumber=0x0001
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=04.14
S: Manufacturer=Linux 4.14.2-1-default xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
Here is what i get from NetworkManager --debug
Code:
<info> [1512633710.1181] NetworkManager (version 1.8.4) is starting... (after a restart)
<info> [1512633710.1182] Read config: /etc/NetworkManager/NetworkManager.conf
<info> [1512633710.1229] manager[0x5640d12a5130]: monitoring kernel firmware directory '/lib/firmware'.
<info> [1512633710.1235] policy: hostname management mode: default
<info> [1512633710.1237] dns-mgr[0x5640d12b0160]: init: dns=default, rc-manager=netconfig
<info> [1512633710.1245] rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi)
<info> [1512633710.1247] manager[0x5640d12a5130]: rfkill: WiFi hardware radio set enabled
<info> [1512633710.1247] manager[0x5640d12a5130]: rfkill: WWAN hardware radio set enabled
<error> [1512633710.1255] bus-manager: could not acquire the NetworkManager service as it is already taken
<error> [1512633710.1255] failed to start the dbus service.
<info> [1512633710.1263] exiting (error)
I have tried rfkill unblock all just to see if it was blocked. Nothing changed.
Well I could be wrong since I am here asking for help hehe.
-
Re: SIM-card not recognized
Originally Posted by kFelix
Hi, sorry for the late answer but i already had that rep, don't think that kernel is the problem. Not sure but, I am not using any usb devices for the SIM-card is more like a port. Anyway, this is what i get from lsusb and usb-devices:
Code:
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 04f2:b45d Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 8087:0a2a Intel Corp.
Bus 002 Device 002: ID 138a:0017 Validity Sensors, Inc. Fingerprint Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Ok, but often these internal mobile broadband devices are attached to the USB subsystem. However I agree that doesn't appear to be the case here.
This might be it...
Code:
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=11 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=138a ProdID=0017 Rev=00.78
S: SerialNumber=d6fdfbaa07be
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
No driver loaded though...
-
Re: SIM-card not recognized
Others have reported similar issues with getting this hardware working...
https://askubuntu.com/questions/7479...roadband-modem
Looks like work in progress.
-
Re: SIM-card not recognized
Originally Posted by deano_ferrari
Ok, but often these internal mobile broadband devices are attached to the USB subsystem. However I agree that doesn't appear to be the case here.
This might be it...
Code:
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=11 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=138a ProdID=0017 Rev=00.78
S: SerialNumber=d6fdfbaa07be
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
No driver loaded though...
Scratch that - it's a Validity Sensors, Inc fingerprint reader.
Last edited by deano_ferrari; 07-Dec-2017 at 01:29.
-
Re: SIM-card not recognized
Strange that it doesn't show up in your lsusb output. Disabled in the UEFI BIOS perhaps?
-
Re: SIM-card not recognized
Originally Posted by deano_ferrari
Strange that it doesn't show up in your lsusb output. Disabled in the UEFI BIOS perhaps?
Just went and checked my BIOS, nothing strange there. All kind of ports about network/wireless was enabled. Only thing that may or may not affect the problem is BIOS version. It's from 2015 Jan. (The month they released the laptop). I am not 100% sure, but it seems like the factory version should support the port.
-
Re: SIM-card not recognized
-
Re: SIM-card not recognized
Originally Posted by Knurpht
Hi,
It didn't work. Had to create the file :
Code:
/etc/modprobe.d/avoid-mbib.conf
But still nothing changed after a reboot. :/
Checked lsusb and usb-devices both was the same
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
| 
