Results 1 to 9 of 9

Thread: Please help, Leap going crazy

  1. #1
    Join Date
    Nov 2013
    Location
    Ljubljana, Slovenia
    Posts
    465

    Default Please help, Leap going crazy

    Hi,

    I decided to switch to Leap from Tumbleweed just to add some stability, but lo and behold, issues have arised.

    The timeline is as following: I installed Leap 42.3, it installed normally, I fully updated it, and now i receive random freezes which result in an unusable system that keeps logging out. Here's some of the Xorg.0.log (can't post the whole thing):

    Code:
    [  2882.886] (II) input device 'Logitech USB Receiver', /dev/input/event7 is tagged by udev as: Keyboard
    [  2882.886] (II) input device 'Logitech USB Receiver', /dev/input/event7 is a keyboard
    [  2882.928] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
    [  2882.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52F.0002/input/input8/event7"
    [  2882.928] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
    [  2882.928] (**) Option "AccelerationScheme" "none"
    [  2882.928] (**) Logitech USB Receiver: (accel) selected scheme none/0
    [  2882.928] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [  2882.928] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [  2882.929] (II) input device 'Logitech USB Receiver', /dev/input/event7 is tagged by udev as: Keyboard
    [  2882.929] (II) input device 'Logitech USB Receiver', /dev/input/event7 is a keyboard
    [  2882.929] (II) config/udev: Adding input device FJ Camera (/dev/input/event17)
    [  2882.929] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
    [  2882.929] (**) FJ Camera: Applying InputClass "system-keyboard"
    [  2882.929] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
    [  2882.929] (**) FJ Camera: Applying InputClass "libinput keyboard catchall"
    [  2882.929] (II) Using input driver 'libinput' for 'FJ Camera'
    [  2882.929] (**) FJ Camera: always reports core events
    [  2882.929] (**) Option "Device" "/dev/input/event17"
    [  2882.929] (**) Option "_source" "server/udev"
    [  2882.930] (II) input device 'FJ Camera', /dev/input/event17 is tagged by udev as: Keyboard
    [  2882.930] (II) input device 'FJ Camera', /dev/input/event17 is a keyboard
    [  2882.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input18/event17"
    [  2882.970] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 13)
    [  2882.970] (**) Option "xkb_model" "microsoftpro"
    [  2882.970] (**) Option "xkb_layout" "si"
    [  2882.970] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [  2882.971] (II) input device 'FJ Camera', /dev/input/event17 is tagged by udev as: Keyboard
    [  2882.971] (II) input device 'FJ Camera', /dev/input/event17 is a keyboard
    [  2882.971] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
    [  2882.971] (II) No input driver specified, ignoring this device.
    [  2882.971] (II) This device may have been added with another device file.
    [  2882.971] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
    [  2882.972] (II) No input driver specified, ignoring this device.
    [  2882.972] (II) This device may have been added with another device file.
    [  2882.972] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
    [  2882.972] (II) No input driver specified, ignoring this device.
    [  2882.972] (II) This device may have been added with another device file.
    [  2882.972] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [  2882.972] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [  2882.972] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [  2882.972] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [  2882.972] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
    [  2882.972] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
    [  2882.972] (**) AT Translated Set 2 keyboard: always reports core events
    [  2882.972] (**) Option "Device" "/dev/input/event0"
    [  2882.972] (**) Option "_source" "server/udev"
    [  2882.973] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [  2882.973] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [  2883.044] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [  2883.044] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [  2883.044] (**) Option "xkb_model" "microsoftpro"
    [  2883.044] (**) Option "xkb_layout" "si"
    [  2883.044] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [  2883.044] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
    [  2883.044] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
    [  2883.045] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
    [  2883.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [  2883.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [  2883.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
    [  2883.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [  2883.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [  2883.045] (II) LoadModule: "synaptics"
    [  2883.045] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
    [  2883.072] (II) Module synaptics: vendor="X.Org Foundation"
    [  2883.072]     compiled for 1.18.3, module version = 1.8.3
    [  2883.072]     Module class: X.Org XInput Driver
    [  2883.072]     ABI class: X.Org XInput driver, version 22.1
    [  2883.072] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [  2883.072] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [  2883.072] (**) Option "Device" "/dev/input/event1"
    [  2883.172] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1368 - 5654 (res 40)
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1278 - 4678 (res 51)
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [  2883.172] (**) Option "HorizEdgeScroll" "off"
    [  2883.172] (**) Option "TapButton1" "1"
    [  2883.172] (**) Option "TapButton2" "3"
    [  2883.172] (**) Option "TapButton3" "2"
    [  2883.172] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [  2883.172] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [  2883.172] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [  2883.240] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
    [  2883.240] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
    [  2883.240] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [  2883.240] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [  2883.240] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
    [  2883.240] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [  2883.240] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [  2883.240] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [  2883.240] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [  2883.240] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [  2883.241] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [  2883.241] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [  2883.241] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
    [  2883.241] (II) No input driver specified, ignoring this device.
    [  2883.241] (II) This device may have been added with another device file.
    [  2883.259] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [  2883.259] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
    [  2883.259] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [  2883.259] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
    [  2883.259] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
    [  2883.259] (**) Logitech USB Receiver: always reports core events
    [  2883.259] (**) Option "Device" "/dev/input/event7"
    [  2883.259] (**) Option "_source" "_driver/libinput"
    [  2883.259] (II) libinput: Logitech USB Receiver: is a virtual subdevice
    [  2883.259] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52F.0002/input/input8/event7"
    [  2883.259] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 16)
    [  2883.259] (**) Option "xkb_model" "microsoftpro"
    [  2883.259] (**) Option "xkb_layout" "si"
    [  2883.259] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [  2889.887] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  2889.887] (II) modeset(0): Printing DDC gathered Modelines:
    [  2889.887] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  2891.553] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  2891.553] (II) modeset(0): Printing DDC gathered Modelines:
    [  2891.553] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3160.804] (II) SYN_DROPPED event from "Logitech USB Receiver" - some input events have been lost.
    [  3160.807] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  3160.807] (II) modeset(0): Printing DDC gathered Modelines:
    [  3160.807] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3160.813] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  3160.813] (II) modeset(0): Printing DDC gathered Modelines:
    [  3160.813] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3160.817] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  3160.817] (II) modeset(0): Printing DDC gathered Modelines:
    [  3160.817] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3160.822] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  3160.822] (II) modeset(0): Printing DDC gathered Modelines:
    [  3160.822] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3160.827] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  3160.827] (II) modeset(0): Printing DDC gathered Modelines:
    [  3160.827] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3160.831] (II) modeset(0): EDID vendor "LGD", prod id 851
    [  3160.831] (II) modeset(0): Printing DDC gathered Modelines:
    [  3160.831] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [  3296.422] (II) SYN_DROPPED event from "Logitech USB Receiver" - some input events have been lost.
    Please help, what's wrong with this? The 4.4 kernel worked normally on other distros. Thanks!
    Running openSUSE Leap 42.3 + KDE

  2. #2
    Join Date
    Nov 2013
    Location
    Ljubljana, Slovenia
    Posts
    465

    Default Re: Please help, Leap going crazy

    Jeez, I see that the intel graphics driver wasn't installed. How can that happen on a clean install?
    Running openSUSE Leap 42.3 + KDE

  3. #3
    Join Date
    Oct 2014
    Location
    Italy
    Posts
    2,238

    Default Re: Please help, Leap going crazy

    Quote Originally Posted by holden87 View Post
    Please help, what's wrong with this? The 4.4 kernel worked normally on other distros. Thanks!
    Maybe your HW doesn't like the backported drm drivers in drm-kmp-default: try to uninstall that package and see if that helps.
    Tumbleweed Gnome on i7 4720HQ + Geforce GTX960M
    testing Leap 15.3

  4. #4
    Join Date
    Oct 2014
    Location
    Italy
    Posts
    2,238

    Default Re: Please help, Leap going crazy

    Quote Originally Posted by holden87 View Post
    Jeez, I see that the intel graphics driver wasn't installed. How can that happen on a clean install?
    AFAIK the installer defaults to the modesetting driver for some graphics chips.
    Tumbleweed Gnome on i7 4720HQ + Geforce GTX960M
    testing Leap 15.3

  5. #5
    Join Date
    Nov 2013
    Location
    Ljubljana, Slovenia
    Posts
    465

    Default Re: Please help, Leap going crazy

    Hi, bruno.

    How do i do that?

    Thanks!
    Running openSUSE Leap 42.3 + KDE

  6. #6
    Join Date
    Oct 2014
    Location
    Italy
    Posts
    2,238

    Default Re: Please help, Leap going crazy

    You can do that by YaST Software, looking for package drm-kmp-default and uninstalling it, or in a terminal by issuing:
    Code:
    su -
    <password for root>
    zypper rm drm-kmp-default
    Tumbleweed Gnome on i7 4720HQ + Geforce GTX960M
    testing Leap 15.3

  7. #7
    Join Date
    Nov 2013
    Location
    Ljubljana, Slovenia
    Posts
    465

    Default Re: Please help, Leap going crazy

    So basically, i install intel video driver, uninstall the package you specified, and that should be it?

    Thanks
    Running openSUSE Leap 42.3 + KDE

  8. #8
    Join Date
    Oct 2014
    Location
    Italy
    Posts
    2,238

    Default Re: Please help, Leap going crazy

    I would suggest to uninstall drm-kmp-default first, reboot and see if that is enough.
    If the installer defaulted to NOT installing the Intel driver, maybe there are problems installing it with your current HW. The modeset driver should work better than the intel with newer Intel GPUs.
    If needed, you may try to install the Intel driver and see how it compares to the modesetting driver. Write back here in case of trouble.
    Tumbleweed Gnome on i7 4720HQ + Geforce GTX960M
    testing Leap 15.3

  9. #9
    Join Date
    Nov 2013
    Location
    Ljubljana, Slovenia
    Posts
    465

    Default Re: Please help, Leap going crazy

    Hi,

    removing drm-kmp has done the trick. Everything in order now!

    Thanks.
    Running openSUSE Leap 42.3 + KDE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •