Hello everyone,
I have an old Athlon64 acting as my home server.
I have this setup for ages but recently (after the upgrade to 42.2), started to have random locks.
In my attempt to see if there is something wrong with temps etc, I noticed that sensors have completely stupid settings:

Code:
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:   +39.0°C  

w83627thf-isa-0290
Adapter: ISA adapter
VCore:        +1.09 V  (min =  +0.70 V, max =  +1.87 V)
+12V:        +12.40 V  (min =  +6.99 V, max = +11.43 V)  ALARM
+3.3V:        +3.14 V  (min =  +0.66 V, max =  +3.15 V)
+5V:          +5.01 V  (min =  +0.64 V, max =  +4.29 V)  ALARM
-12V:        -11.70 V  (min = -11.04 V, max = -14.91 V)  ALARM
V5SB:         +4.92 V  (min =  +2.37 V, max =  +0.99 V)  ALARM
VBat:         +2.67 V  (min =  +2.30 V, max =  +1.94 V)  ALARM
fan1:           0 RPM  (min =  788 RPM, div = 8)  ALARM
CPU Fan:     1493 RPM  (min =  860 RPM, div = 8)
fan3:           0 RPM  (min = 5672 RPM, div = 2)  ALARM
M/B Temp:      +1.0°C  (high = +14.0°C, hyst =  +2.0°C)  sensor = thermistor
CPU Temp:     +30.5°C  (high = +41.0°C, hyst = +40.0°C)  sensor = CPU diode
temp3:        +36.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
cpu0_vid:    +0.000 V
beep_enable: enabled
Obviously, it's not possible to have the max values UNDER the min values and it's not possible to have the Hysterical temp values at 2 degrees!

So, how do I configure them correctly?