Results 1 to 2 of 2

Thread: sensors stupid configuration & other questions

  1. #1
    Join Date
    Jul 2008
    Location
    Athens
    Posts
    286

    Angry sensors stupid configuration & other questions

    Hello everyone,
    I have an old Athlon64 acting as my home server.
    I have this setup for ages but recently (after the upgrade to 42.2), started to have random locks.
    In my attempt to see if there is something wrong with temps etc, I noticed that sensors have completely stupid settings:

    Code:
    k8temp-pci-00c3
    Adapter: PCI adapter
    Core0 Temp:   +39.0°C  
    
    w83627thf-isa-0290
    Adapter: ISA adapter
    VCore:        +1.09 V  (min =  +0.70 V, max =  +1.87 V)
    +12V:        +12.40 V  (min =  +6.99 V, max = +11.43 V)  ALARM
    +3.3V:        +3.14 V  (min =  +0.66 V, max =  +3.15 V)
    +5V:          +5.01 V  (min =  +0.64 V, max =  +4.29 V)  ALARM
    -12V:        -11.70 V  (min = -11.04 V, max = -14.91 V)  ALARM
    V5SB:         +4.92 V  (min =  +2.37 V, max =  +0.99 V)  ALARM
    VBat:         +2.67 V  (min =  +2.30 V, max =  +1.94 V)  ALARM
    fan1:           0 RPM  (min =  788 RPM, div = 8)  ALARM
    CPU Fan:     1493 RPM  (min =  860 RPM, div = 8)
    fan3:           0 RPM  (min = 5672 RPM, div = 2)  ALARM
    M/B Temp:      +1.0°C  (high = +14.0°C, hyst =  +2.0°C)  sensor = thermistor
    CPU Temp:     +30.5°C  (high = +41.0°C, hyst = +40.0°C)  sensor = CPU diode
    temp3:        +36.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
    cpu0_vid:    +0.000 V
    beep_enable: enabled
    Obviously, it's not possible to have the max values UNDER the min values and it's not possible to have the Hysterical temp values at 2 degrees!

    So, how do I configure them correctly?

  2. #2
    Join Date
    Jul 2008
    Location
    Athens
    Posts
    286

    Default Απ: sensors stupid configuration & other questions

    Quote Originally Posted by tpe View Post
    Hello everyone,
    I have an old Athlon64 acting as my home server.
    I have this setup for ages but recently (after the upgrade to 42.2), started to have random locks.
    In my attempt to see if there is something wrong with temps etc, I noticed that sensors have completely stupid settings:

    Code:
    k8temp-pci-00c3
    Adapter: PCI adapter
    Core0 Temp:   +39.0°C  
    
    w83627thf-isa-0290
    Adapter: ISA adapter
    VCore:        +1.09 V  (min =  +0.70 V, max =  +1.87 V)
    +12V:        +12.40 V  (min =  +6.99 V, max = +11.43 V)  ALARM
    +3.3V:        +3.14 V  (min =  +0.66 V, max =  +3.15 V)
    +5V:          +5.01 V  (min =  +0.64 V, max =  +4.29 V)  ALARM
    -12V:        -11.70 V  (min = -11.04 V, max = -14.91 V)  ALARM
    V5SB:         +4.92 V  (min =  +2.37 V, max =  +0.99 V)  ALARM
    VBat:         +2.67 V  (min =  +2.30 V, max =  +1.94 V)  ALARM
    fan1:           0 RPM  (min =  788 RPM, div = 8)  ALARM
    CPU Fan:     1493 RPM  (min =  860 RPM, div = 8)
    fan3:           0 RPM  (min = 5672 RPM, div = 2)  ALARM
    M/B Temp:      +1.0°C  (high = +14.0°C, hyst =  +2.0°C)  sensor = thermistor
    CPU Temp:     +30.5°C  (high = +41.0°C, hyst = +40.0°C)  sensor = CPU diode
    temp3:        +36.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
    cpu0_vid:    +0.000 V
    beep_enable: enabled
    Obviously, it's not possible to have the max values UNDER the min values and it's not possible to have the Hysterical temp values at 2 degrees!

    So, how do I configure them correctly?
    Obviously Hysterical=Hysteresis....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •