Results 1 to 5 of 5

Thread: System boots only in recovery mode

  1. #1

    Question System boots only in recovery mode

    I've install the latest Nvidia drivers (Hard Way) 384.90 and system boots only in recovery mode. Everything seems to be working, but it's strange. When I try to boot in regular way, the system freeze after few seconds. The last output on terminal is:

    SP5100_tco: I/O adress 0x0cd6 already in use

    Do you know, what might be wrong?

    Graphics card: Nvidia 1060
    System: Tumbleweed
    CPU: AMD Ryzen 5

  2. #2
    Join Date
    Mar 2011

    Default AW: System boots only in recovery mode

    See the Logs.
    journlactl -b

  3. #3

    Default Re: AW: System boots only in recovery mode

    Quote Originally Posted by Sauerland View Post
    See the Logs.
    journlactl -b
    The Journalctl contains entries only from the last boot (recovery mode), which is OK. I don't know, how to get the log from the previous regular boot, which stuck.

    I've notice just one suspisious part of the Xorg log:

    [    53.406] (II) NVIDIA(0):     "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
    [    53.406] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
    [    53.415] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
    [    53.415] (--) NVIDIA(0):     option
    [    53.415] (--) Depth 24 pixmap format is 32 bpp
    [    53.417] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
    [    53.417] (II) NVIDIA:     access.
    [    53.421] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [    53.421] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
    [    53.421] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
    [    53.421] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
    [    53.421] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
    [    53.421] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
    [    53.421] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
    [    53.421] (II) NVIDIA(0):     Config Options in the README.
    [    53.447] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
    [    53.489] (==) NVIDIA(0): Disabling shared memory pixmaps
    [    53.489] (==) NVIDIA(0): Backing store enabled
    [    53.489] (==) NVIDIA(0): Silken mouse enabled
    [    53.489] (==) NVIDIA(0): DPMS enabled
    What's a difference between the regular and recovery boot. The recovery works fine, the KDE starts, nvidia driver works.

    hwinfo --gfxcard
    43: PCI 2600.0: 0300 VGA compatible controller (VGA)            
      [Created at pci.378]
      Unique ID: UU1w.P8I4afAkJjA
      Parent ID: w+J7.0TU4LKoL980
      SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:26:00.0
      SysFS BusID: 0000:26:00.0
      Hardware Class: graphics card
      Model: "nVidia GP106 [GeForce GTX 1060 6GB]"
      Vendor: pci 0x10de "nVidia Corporation"
      Device: pci 0x1c03 "GP106 [GeForce GTX 1060 6GB]"
      SubVendor: pci 0x3842 " Corp."
      SubDevice: pci 0x6161 
      Revision: 0xa1
      Driver: "nvidia"
      Driver Modules: "nvidia"
      Memory Range: 0xf6000000-0xf6ffffff (rw,non-prefetchable)
      Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
      Memory Range: 0xf0000000-0xf1ffffff (ro,non-prefetchable)
      I/O Ports: 0xf000-0xf07f (rw)
      Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
      IRQ: 43 (135677 events)
      Module Alias: "pci:v000010DEd00001C03sv00003842sd00006161bc03sc00i00"
      Driver Info #0:
        Driver Status: nouveau is not active
        Driver Activation Cmd: "modprobe nouveau"
      Driver Info #1:
        Driver Status: nvidia_drm is active
        Driver Activation Cmd: "modprobe nvidia_drm"
      Driver Info #2:
        Driver Status: nvidia is active
        Driver Activation Cmd: "modprobe nvidia"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #31 (PCI bridge)
    Primary display adapter: #43

  4. #4

    Default Re: System boots only in recovery mode

    It has to do something with the Plymouth (boot splash). When I disable it in the Grub config, it boots OK.

  5. #5

    Default Re: System boots only in recovery mode

    I have run into the same condition where installation of the NVIDIA 384.98-29.1 (recommended way) does not work from the default boot selection in GRUB2. I also end up with a blank screen. However, if I use the Advanced Recovery boot option (kernel 4.4.92-31-default) it boots fine. This was sending me around in circles for a few days...

    I did just note that nvidia-gfxG04-kmp-default (which was also installed the recommended way) is tagged as 384.98_k4.4.76_1-29.1.

    Does anyone know if this kernel version mismatch might be causing the issue?

    Right now I have a system that is usable, and I need to get some productivity going after the last few days, so not really looking at chasing that rabbit hole right now, but I thought that I'd throw that out there for others to consider...

    Graphics card: Nvidia GeForce GTX 1060
    System: Leap 42.3 (new install)
    MB: ASRock X399 Fatal1ty
    CPU: AMD Ryzen Threadripper 1950X
    RAM: Corsair 64 GB DDR4 2667

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts