Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: yast opens but none or the yast icons will open

  1. #1

    Default yast opens but none or the yast icons will open

    Tumbleweed 42.3 KDE.
    I read this post: https://forums.opensuse.org/showthre...doesn%27t+open

    so I ran the command that was posted and got this result:
    Code:
    zypper lr -d
    Repository priorities are without effect. All enabled repositories share the same priority.
    
    # | Alias                                | Name                        | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                                     | Service
    --+--------------------------------------+-----------------------------+---------+-----------+---------+----------+--------+-----------------------------------------------------------------------------------------+--------
    1 | openSUSE-20170802-0                  | openSUSE-20170802-0         | No      | ----      | ----    |   99     | yast2  | hd:///?device=/dev/disk/by-id/usb-Kingston_DT_101_G2_0013729B67AEBA802633017A-0:0-part2 |        
    2 | packman.inode.at-openSUSE_Tumbleweed | Packman Repository          | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://packman.inode.at/suse/openSUSE_Tumbleweed/                                       |        
    3 | repo-debug                           | openSUSE-Tumbleweed-Debug   | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/tumbleweed/repo/oss/                                 |        
    4 | repo-non-oss                         | openSUSE-Tumbleweed-Non-Oss | Yes     | (r ) Yes  | Yes     |   99     | yast2  | http://download.opensuse.org/tumbleweed/repo/non-oss/                                   |        
    5 | repo-oss                             | openSUSE-Tumbleweed-Oss     | Yes     | (r ) Yes  | Yes     |   99     | yast2  | http://download.opensuse.org/tumbleweed/repo/oss/                                       |        
    6 | repo-source                          | openSUSE-Tumbleweed-Source  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/tumbleweed/repo/oss/                                |        
    7 | repo-update                          | openSUSE-Tumbleweed-Update  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/tumbleweed/
    I don't know if this has any information that will help or not.
    Yast opens but nothing else will open when I click on it. I tried bootloader first and then tried others. No yast2 would open.

    What do I need to do to fix this?

  2. #2
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    24,988

    Default Re: yast opens but none or the yast icons will open

    The strange thing here is that you say you run TUMBLEWEED in the prefix of your thread title and that you then say "Tumbleweed 42.3 KDE" in your post. The last thing does not exist. It either the one or the other.

    But your list tells us that you have only the standard repo and Packman and that they are all Tumbleweed ones. So that is fine and probably not the source of your problem.
    Henk van Velden

  3. #3
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    24,988

    Default Re: yast opens but none or the yast icons will open

    You could start a terminal emulator (like Konsole) as root and try
    Code:
    yast2
    Maybe it shows errors.
    Henk van Velden

  4. #4

    Default Re: yast opens but none or the yast icons will open

    Code:
    yast2
    QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0                                                                                
    Run command: /sbin/yast2 bootloader &                                                                                                                                 
    terminate called after throwing an instance of 'YUIPluginException'                                                                                                   
      what():  Couldn't load plug-in qt                                                                                                                                   
    /sbin/yast2: line 448:  4267 Aborted                 (core dumped) $ybindir/y2start $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
    Yast opened but none of the icons opened.

  5. #5
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    24,988

    Default Re: yast opens but none or the yast icons will open

    First a general remark. Please copy/paste complete: prompt, command, output, nextprompt. Now we have only the output and we have to assume dsome things, which is not a good idea when trying to debug something.

    Example:
    Code:
    boven:~ # yast2
    boven:~ #
    Those prompts are important to be seen in many (also this) cases.

    But, there are some errors there.
    Nothing that I can solve in a wink. I hope others tune in.
    Henk van Velden

  6. #6

    Default Re: yast opens but none or the yast icons will open

    Quote Originally Posted by hwms View Post
    Code:
    yast2
    QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0                                                                                
    Run command: /sbin/yast2 bootloader &                                                                                                                                 
    terminate called after throwing an instance of 'YUIPluginException'                                                                                                   
      what():  Couldn't load plug-in qt                                                                                                                                   
    /sbin/yast2: line 448:  4267 Aborted                 (core dumped) $ybindir/y2start $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
    Yast opened but none of the icons opened.
    Update/Install the following packages:
    libyui-qt-graph8
    libyui-qt-pkg8
    libyui-qt8

    https://forums.opensuse.org/showthre...r-not-starting

  7. #7

    Default Re: yast opens but none or the yast icons will open

    Quote Originally Posted by hcvv View Post
    First a general remark. Please copy/paste complete: prompt, command, output, nextprompt. Now we have only the output and we have to assume dsome things, which is not a good idea when trying to debug something.

    Example:
    Code:
    boven:~ # yast2
    boven:~ #
    Those prompts are important to be seen in many (also this) cases.

    But, there are some errors there.
    Nothing that I can solve in a wink. I hope others tune in.
    Code:
    linux-h65n:/home/hw-suse # boven:~ # yast2
    If 'boven:~' is not a typo you can use command-not-found to lookup the package that contains it, like this:
        cnf boven:~
    Code:
    linux-h65n:/home/hw-suse # boven:~ #
    If 'boven:~' is not a typo you can use command-not-found to lookup the package that contains it, like this:
        cnf boven:~

  8. #8

    Default Re: yast opens but none or the yast icons will open

    Quote Originally Posted by Thor_Thenhammer View Post
    Update/Install the following packages:
    libyui-qt-graph8
    libyui-qt-pkg8
    libyui-qt8

    https://forums.opensuse.org/showthre...r-not-starting
    Since I am mostly gui and not familiar with zypper, I am not sure how to install or update. Found how to install with zypper.

  9. #9

    Default Re: yast opens but none or the yast icons will open

    I have gotten the files
    Update/Install the following packages:
    libyui-qt-graph8
    libyui-qt-pkg8
    libyui-qt8
    installed and yast is now working again. Thanks.

  10. #10
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    24,988

    Default Re: yast opens but none or the yast icons will open

    Quote Originally Posted by hwms View Post
    Code:
    linux-h65n:/home/hw-suse # boven:~ # yast2
    If 'boven:~' is not a typo you can use command-not-found to lookup the package that contains it, like this:
        cnf boven:~
    Code:
    linux-h65n:/home/hw-suse # boven:~ #
    If 'boven:~' is not a typo you can use command-not-found to lookup the package that contains it, like this:
        cnf boven:~
    Ishowed you an exampleon how it looks when you copy/paste prompt, command, output (well, there isn't much output in my example) and next prompt. This is not something you should try to execute anywhere.

    But the way you show things, including the prompt inux-h65n:/home/hw-suse # is exactly what want to tell you. Thanks.
    Henk van Velden

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •