Results 1 to 5 of 5

Thread: Install Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2

  1. #1

    Default Install Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2

    Hi everybody,
    I'm try to install my Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2.
    I'm not able to reach my goal.
    NOTE: my USB camera works!

    The Pi Camera uses CSI connector, instead of the USB, then i think it could be a problem of that interface.
    My fear is that the Pi Camera is not compatible with 64-bit os or is not yet supported by opensuse.
    Is there someone that already install and use that camera on Rpi3 with opensuse?
    Thanks for all your support.

    Best regards,
    Marco

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    32,339
    Blog Entries
    15

    Default Re: Install Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2

    Quote Originally Posted by mgoldfinch View Post
    Hi everybody,
    I'm try to install my Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2.
    I'm not able to reach my goal.
    NOTE: my USB camera works!

    The Pi Camera uses CSI connector, instead of the USB, then i think it could be a problem of that interface.
    My fear is that the Pi Camera is not compatible with 64-bit os or is not yet supported by opensuse.
    Is there someone that already install and use that camera on Rpi3 with opensuse?
    Thanks for all your support.

    Best regards,
    Marco
    Hi
    There is a python module for it.... can you builtd it?
    http://picamera.readthedocs.io/en/release-1.13/
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  3. #3

    Post Re: Install Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2

    Hi Malcom,
    yes I try it but using pip doesn't work.
    Following I copy my response to the command,

    sudo pip install picamera

    Collecting picamera
    Using cached picamera-1.13.tar.gz
    Installing collected packages: picamera
    Running setup.py install for picamera ... error
    Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-vki0jipz/picamera/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-qpbyz7qm-record/install-record.txt --single-version-externally-managed --compile:
    running install
    Traceback (most recent call last):
    File "<string>", line 1, in <module>
    File "/tmp/pip-build-vki0jipz/picamera/setup.py", line 145, in <module>
    main()
    File "/tmp/pip-build-vki0jipz/picamera/setup.py", line 140, in main
    cmdclass = {'install': CustomInstallCommand},
    File "/usr/lib64/python3.4/distutils/core.py", line 148, in setup
    dist.run_commands()
    File "/usr/lib64/python3.4/distutils/dist.py", line 955, in run_commands
    self.run_command(cmd)
    File "/usr/lib64/python3.4/distutils/dist.py", line 974, in run_command
    cmd_obj.run()
    File "/tmp/pip-build-vki0jipz/picamera/setup.py", line 111, in run
    raise ValueError('Unable to determine if this system is a Raspberry Pi')
    ValueError: Unable to determine if this system is a Raspberry Pi

    ----------------------------------------
    Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-vki0jipz/picamera/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-qpbyz7qm-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-vki0jipz/picamera/

    HOPE IT COULD HELP TO SOLVE.

    Best regards,
    Marco

  4. #4

    Default Re: Install Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2

    This could be an interesting link:

    https://github.com/waveform80/picamera/issues/404

  5. #5
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    32,339
    Blog Entries
    15

    Default Re: Install Raspberry Pi Camera Rev 1.3 on openSUSE Leap 42.2

    Quote Originally Posted by mgoldfinch View Post
    This could be an interesting link:

    https://github.com/waveform80/picamera/issues/404
    Hi
    So no good for 64bit....
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •