Results 1 to 6 of 6

Thread: KDE Plasma5 unable to start with Nvidia driver

  1. #1

    Default KDE Plasma5 unable to start with Nvidia driver

    Hello,
    I get randomly this error message when starting up my computer and starting KDE from either KDM or SDDM:
    Plasma is unable to start as it could not correctly use OpenGL 2.
    Please check that your graphic drivers are set up correctly.
    Sometimes it's ok, starting KDE without this error, but mostly the error is present preventing to start KDE.
    I have proprietary nvidia driver from Suse Nvidia repository. With nouveau it was even worse - hanging X when starting KDE.
    Driver seems to be ok by looking on glxgears and Xorg log.

    I noticed this error, not sure is related:
    Code:
    192:~ # systemctl -l status systemd-tmpfiles-setup.service 
     systemd-tmpfiles-setup.service - Create Volatile Files and Directories 
      Loaded: loaded (/usr/lib/systemd/system/systemd-tmpfiles-setup.service; static; vendor preset: disabled) 
      Active: failed (Result: exit-code) since Tue 2017-08-01 13:10:13 CEST; 3min 26s ago 
        Docs: man:tmpfiles.d(5) 
              man:systemd-tmpfiles(8) 
     Process: 503 ExecStart=/usr/bin/systemd-tmpfiles --create --remove --boot --exclude-prefix=/dev (code=exited, status=1/FAILURE)
    Main PID: 503 (code=exited, status=1/FAILURE) 
    
    Aug 01 13:10:12 linux systemd[1]: Starting Create Volatile Files and Directories... 
    Aug 01 13:10:13 linux systemd-tmpfiles[503]: symlink(/dev/nvidiactl, /run/udev/static_node-tags/uaccess/nvidiactl) failed: No such file or dir
    ectory
    Aug 01 13:10:13 linux systemd-tmpfiles[503]: symlink(/dev/nvidia0, /run/udev/static_node-tags/uaccess/nvidia0) failed: No such file or directo
    ry
    Aug 01 13:10:13 linux systemd[1]: systemd-tmpfiles-setup.service: Main process exited, code=exited, status=1/FAILURE
    Aug 01 13:10:13 linux systemd[1]: Failed to start Create Volatile Files and Directories.
    Aug 01 13:10:13 linux systemd[1]: systemd-tmpfiles-setup.service: Unit entered failed state.
    Aug 01 13:10:13 linux systemd[1]: systemd-tmpfiles-setup.service: Failed with result 'exit-code'.
    192:~ #

    There are various post on Internet about this error, but not with clear resolution.
    There is this bug in KDE, but is closed:
    https://bugs.kde.org/show_bug.cgi?id=375730

    Thank you for any help.

  2. #2

    Default Re: KDE Plasma5 unable to start with Nvidia driver

    Code:
    192:/var/log # cat Xorg.0.log.old
    [   138.581]  
    X.Org X Server 1.18.3 
    Release Date: 2016-04-04 
    [   138.581] X Protocol Version 11, Revision 0 
    [   138.581] Build Operating System: openSUSE SUSE LINUX 
    [   138.581] Current Operating System: Linux 192 4.4.76-1-default #1 SMP Fri Jul 14 08:48:13 UTC 2017 (9a2885c) x86_64
    [   138.581] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.76-1-default root=UUID=3984ee8d-6fbb-4413-93dc-c175e3b45a6b resume=/dev/disk/by
    -path/pci-0000:00:08.0-ata-1-part3 splash=silent quiet showopts 
    [   138.581] Build Date: 18 July 2017  08:19:38AM 
    [   138.581]   
    [   138.581] Current version of pixman: 0.34.0 
    [   138.581]    Before reporting problems, check http://wiki.x.org
           to make sure that you have the latest version. 
    [   138.582] Markers: (--) probed, (**) from config file, (==) default setting, 
           (++) from command line, (!!) notice, (II) informational, 
           (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 
    [   138.582] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 31 23:37:54 2017 
    [   138.582] (==) Using config directory: "/etc/X11/xorg.conf.d" 
    [   138.582] (==) Using system config directory "/usr/share/X11/xorg.conf.d" 
    [   138.582] (==) No Layout section.  Using the first Screen section. 
    [   138.582] (==) No screen section available. Using defaults. 
    [   138.582] (**) |-->Screen "Default Screen Section" (0) 
    [   138.582] (**) |   |-->Monitor "<default monitor>" 
    [   138.582] (==) No monitor specified for screen "Default Screen Section". 
           Using a default monitor configuration. 
    [   138.582] (==) Automatically adding devices 
    [   138.582] (==) Automatically enabling devices 
    [   138.582] (==) Automatically adding GPU devices 
    [   138.582] (==) Max clients allowed: 256, resource mask: 0x1fffff 
    [   138.582] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. 
    [   138.582]    Entry deleted from font path. 
    [   138.582] (==) FontPath set to: 
           /usr/share/fonts/misc:unscaled, 
           /usr/share/fonts/Type1/, 
           /usr/share/fonts/100dpi:unscaled, 
           /usr/share/fonts/75dpi:unscaled, 
           /usr/share/fonts/ghostscript/, 
           /usr/share/fonts/cyrillic:unscaled, 
           /usr/share/fonts/truetype/, 
           built-ins 
    [   138.582] (==) ModulePath set to "/usr/lib64/xorg/modules" 
    [   138.582] (**) Extension "XFree86-DGA" is disabled 
    [   138.582] (II) The server relies on udev to provide the list of input devices. 
           If no devices become available, reconfigure udev or disable AutoAddDevices. 
    [   138.582] (II) Loader magic: 0x80fce0 
    [   138.582] (II) Module ABI versions: 
    [   138.582]    X.Org ANSI C Emulation: 0.4 
    [   138.582]    X.Org Video Driver: 20.0 
    [   138.582]    X.Org XInput driver : 22.1 
    [   138.582]    X.Org Server Extension : 9.0 
    [   138.593] (++) using VT number 7 
    
    [   138.593] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration 
    [   138.593] (II) xfree86: Adding drm device (/dev/dri/card0) 
    [   138.594] (--) PCI:*(0:0:13:0) 10de:03d6:1043:83a4 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xdd000000/16777216, BIOS @ 0x
    ????????/131072 
    [   138.594] (II) LoadModule: "glx" 
    [   138.594] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so 
    [   138.609] (II) Module glx: vendor="NVIDIA Corporation" 
    [   138.609]    compiled for 4.0.2, module version = 1.0.0 
    [   138.609]    Module class: X.Org Server Extension 
    [   138.609] (II) NVIDIA GLX Module  304.135  Tue Jan 17 15:46:50 PST 2017 
    [   138.609] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers 
    [   138.609] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers 
    [   138.609] (==) Matched nvidia as autoconfigured driver 0 
    [   138.609] (==) Matched nouveau as autoconfigured driver 1 
    [   138.609] (==) Matched nv as autoconfigured driver 2 
    [   138.609] (==) Matched nvidia as autoconfigured driver 3 
    [   138.609] (==) Matched nouveau as autoconfigured driver 4 
    [   138.609] (==) Matched nv as autoconfigured driver 5 
    [   138.609] (==) Matched modesetting as autoconfigured driver 6 
    [   138.609] (==) Matched fbdev as autoconfigured driver 7 
    [   138.609] (==) Matched vesa as autoconfigured driver 8 
    [   138.609] (==) Assigned the driver to the xf86ConfigLayout 
    [   138.609] (II) LoadModule: "nvidia" 
    [   138.609] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so 
    [   138.610] (II) Module nvidia: vendor="NVIDIA Corporation" 
    [   138.610]    compiled for 4.0.2, module version = 1.0.0 
    [   138.610]    Module class: X.Org Video Driver 
    [   138.610] (II) LoadModule: "nouveau" 
    [   138.610] (WW) Warning, couldn't open module nouveau 
    [   138.610] (II) UnloadModule: "nouveau" 
    [   138.610] (II) Unloading nouveau 
    [   138.610] (EE) Failed to load module "nouveau" (module does not exist, 0) 
    [   138.610] (II) LoadModule: "nv" 
    [   138.610] (WW) Warning, couldn't open module nv 
    [   138.610] (II) UnloadModule: "nv" 
    [   138.610] (II) Unloading nv 
    [   138.610] (EE) Failed to load module "nv" (module does not exist, 0) 
    [   138.610] (II) LoadModule: "modesetting" 
    [   138.610] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so 
    [   138.611] (II) Module modesetting: vendor="X.Org Foundation" 
    [   138.611]    compiled for 1.18.3, module version = 1.18.3 
    [   138.611]    Module class: X.Org Video Driver 
    [   138.611]    ABI class: X.Org Video Driver, version 20.0 
    [   138.611] (II) LoadModule: "fbdev" 
    [   138.611] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so 
    [   138.611] (II) Module fbdev: vendor="X.Org Foundation" 
    [   138.611]    compiled for 1.18.3, module version = 0.4.4 
    [   138.611]    Module class: X.Org Video Driver 
    [   138.611]    ABI class: X.Org Video Driver, version 20.0 
    [   138.611] (II) LoadModule: "vesa" 
    [   138.611] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so 
    [   138.611] (II) Module vesa: vendor="X.Org Foundation" 
    [   138.611]    compiled for 1.18.3, module version = 2.3.4 
    [   138.611]    Module class: X.Org Video Driver 
    [   138.611]    ABI class: X.Org Video Driver, version 20.0 
    [   138.611] (II) NVIDIA dlloader X Driver  304.135  Tue Jan 17 15:28:00 PST 2017 
    [   138.611] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs 
    [   138.611] (II) modesetting: Driver for Modesetting Kernel Drivers: kms 
    [   138.611] (II) FBDEV: driver for framebuffer: fbdev 
    [   138.611] (II) VESA: driver for VESA chipsets: vesa 
    [   138.624] (II) Loading sub module "fb" 
    [   138.624] (II) LoadModule: "fb" 
    [   138.624] (II) Loading /usr/lib64/xorg/modules/libfb.so 
    [   138.624] (II) Module fb: vendor="X.Org Foundation" 
    [   138.624]    compiled for 1.18.3, module version = 1.0.0 
    [   138.624]    ABI class: X.Org ANSI C Emulation, version 0.4 
    [   138.624] (II) Loading sub module "wfb" 
    [   138.624] (II) LoadModule: "wfb" 
    [   138.624] (II) Loading /usr/lib64/xorg/modules/libwfb.so 
    [   138.624] (II) Module wfb: vendor="X.Org Foundation" 
    [   138.624]    compiled for 1.18.3, module version = 1.0.0 
    [   138.624]    ABI class: X.Org ANSI C Emulation, version 0.4 
    [   138.624] (II) Loading sub module "ramdac" 
    [   138.624] (II) LoadModule: "ramdac" 
    [   138.624] (II) Module "ramdac" already built-in 
    [   138.624] (WW) Falling back to old probe method for modesetting 
    [   138.624] (WW) Falling back to old probe method for fbdev 
    ... 
    192:/var/log #

  3. #3

    Default Re: KDE Plasma5 unable to start with Nvidia driver

    continue log file
    Code:
    ...
    [   138.624] (II) Loading sub module "fbdevhw" 
    [   138.624] (II) LoadModule: "fbdevhw" 
    [   138.624] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so 
    [   138.625] (II) Module fbdevhw: vendor="X.Org Foundation" 
    [   138.625]    compiled for 1.18.3, module version = 0.0.2 
    [   138.625]    ABI class: X.Org Video Driver, version 20.0 
    [   138.625] (WW) Falling back to old probe method for vesa 
    [   138.625] (II) NVIDIA(0): Creating default Display subsection in Screen section 
          "Default Screen Section" for depth/fbbpp 24/32 
    [   138.625] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 
    [   138.625] (==) NVIDIA(0): RGB weight 888 
    [   138.625] (==) NVIDIA(0): Default visual is TrueColor 
    [   138.625] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) 
    [   138.625] (**) NVIDIA(0): Enabling 2D acceleration 
    [   139.024] (II) NVIDIA(GPU-0): Display (DELL 1909W (CRT-0)) does not support NVIDIA 3D Vision 
    [   139.024] (II) NVIDIA(GPU-0):     stereo. 
    [   139.026] (II) NVIDIA(0): NVIDIA GPU GeForce 7025 / nForce 630a (C61) at PCI:0:13:0 
    [   139.026] (II) NVIDIA(0):     (GPU-0) 
    [   139.026] (--) NVIDIA(0): Memory: 524288 kBytes 
    [   139.026] (--) NVIDIA(0): VideoBIOS: 05.61.32.28.00 
    [   139.026] (--) NVIDIA(0): Interlaced video modes are supported on this GPU 
    [   139.026] (--) NVIDIA(0): Valid display device(s) on GeForce 7025 / nForce 630a at PCI:0:13:0 
    [   139.026] (--) NVIDIA(0):     DELL 1909W (CRT-0) (connected) 
    [   139.026] (--) NVIDIA(0): DELL 1909W (CRT-0): 350.0 MHz maximum pixel clock 
    [   139.026] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display 
    [   139.026] (**) NVIDIA(0):     device DELL 1909W (CRT-0) (Using EDID frequencies has been 
    [   139.026] (**) NVIDIA(0):     enabled on all display devices.) 
    [   139.026] (==) NVIDIA(0):  
    [   139.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" 
    [   139.026] (==) NVIDIA(0):     will be used as the requested mode. 
    [   139.026] (==) NVIDIA(0):  
    [   139.027] (II) NVIDIA(0): Validated MetaModes: 
    [   139.027] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select" 
    [   139.027] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900 
    [   139.027] (WW) NVIDIA(0): Unable to support custom viewPortOut 1440 x 810 +0 +45 
    [   139.027] (WW) NVIDIA(0): Unable to support custom viewPortOut 1440 x 810 +0 +45 
    [   139.028] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config 
    [   139.028] (--) NVIDIA(0):     option 
    [   139.028] (II) UnloadModule: "modesetting" 
    [   139.028] (II) Unloading modesetting 
    [   139.028] (II) UnloadModule: "fbdev" 
    [   139.028] (II) Unloading fbdev 
    [   139.028] (II) UnloadSubModule: "fbdevhw" 
    [   139.028] (II) Unloading fbdevhw 
    [   139.028] (II) UnloadModule: "vesa" 
    [   139.028] (II) Unloading vesa 
    [   139.028] (--) Depth 24 pixmap format is 32 bpp 
    [   139.031] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon 
    [   139.031] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X 
    [   139.031] (II) NVIDIA(0):     configuration option may not be set correctly.  When the 
    [   139.031] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will 
    [   139.031] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For 
    [   139.031] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and 
    [   139.031] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X 
    [   139.031] (II) NVIDIA(0):     Config Options in the README. 
    [   139.031] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select" 
    [   139.129] (==) NVIDIA(0): Disabling shared memory pixmaps 
    [   139.129] (==) NVIDIA(0): Backing store enabled 
    [   139.129] (==) NVIDIA(0): Silken mouse enabled 
    [   139.130] (==) NVIDIA(0): DPMS enabled 
    [   139.130] (II) Loading sub module "dri2" 
    [   139.130] (II) LoadModule: "dri2" 
    [   139.130] (II) Module "dri2" already built-in 
    [   139.130] (II) NVIDIA(0): [DRI2] Setup complete 
    [   139.130] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia 
    [   139.130] (--) RandR disabled 
    [   139.134] (II) Initializing extension GLX 
    [   139.134] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event2) 
    [   139.201] (**) Power Button: Applying InputClass "evdev keyboard catchall" 
    [   139.201] (**) Power Button: Applying InputClass "system-keyboard" 
    [   139.201] (**) Power Button: Applying InputClass "evdev keyboard catchall" 
    [   139.201] (**) Power Button: Applying InputClass "libinput keyboard catchall" 
    [   139.201] (II) LoadModule: "libinput" 
    [   139.201] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so 
    [   139.202] (II) Module libinput: vendor="X.Org Foundation" 
    [   139.202]    compiled for 1.18.3, module version = 0.25.1 
    [   139.202]    Module class: X.Org XInput Driver 
    [   139.202]    ABI class: X.Org XInput driver, version 22.1 
    [   139.202] (II) Using input driver 'libinput' for 'Power Button' 
    [   139.202] (**) Power Button: always reports core events 
    [   139.202] (**) Option "Device" "/dev/input/event2" 
    [   139.203] (**) Option "_source" "server/udev" 
    [   139.203] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard 
    [   139.203] (II) input device 'Power Button', /dev/input/event2 is a keyboard 
    [   139.216] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" 
    [   139.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) 
    [   139.216] (**) Option "xkb_model" "microsoftpro" 
    [   139.216] (**) Option "xkb_layout" "us" 
    [   139.216] (**) Option "xkb_variant" "intl" 
    [   139.216] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" 
    [   139.258] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard 
    [   139.258] (II) input device 'Power Button', /dev/input/event2 is a keyboard 
    [   139.259] (II) config/udev: Adding input device Power Button (/dev/input/event1) 
    [   139.259] (**) Power Button: Applying InputClass "evdev keyboard catchall" 
    [   139.259] (**) Power Button: Applying InputClass "system-keyboard" 
    [   139.259] (**) Power Button: Applying InputClass "evdev keyboard catchall" 
    [   139.259] (**) Power Button: Applying InputClass "libinput keyboard catchall" 
    [   139.259] (II) Using input driver 'libinput' for 'Power Button' 
    [   139.259] (**) Power Button: always reports core events 
    [   139.259] (**) Option "Device" "/dev/input/event1" 
    [   139.259] (**) Option "_source" "server/udev" 
    [   139.259] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard 
    [   139.259] (II) input device 'Power Button', /dev/input/event1 is a keyboard 
    [   139.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" 
    [   139.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) 
    [   139.276] (**) Option "xkb_model" "microsoftpro" 
    [   139.276] (**) Option "xkb_layout" "us" 
    [   139.276] (**) Option "xkb_variant" "intl" 
    [   139.276] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" 
    [   139.276] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard 
    [   139.276] (II) input device 'Power Button', /dev/input/event1 is a keyboard 
    [   139.277] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3) 
    [   139.277] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" 
    [   139.277] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" 
    [   139.277] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" 
    [   139.277] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' 
    [   139.277] (**) Logitech USB Optical Mouse: always reports core events 
    [   139.277] (**) Option "Device" "/dev/input/event3" 
    [   139.277] (**) Option "_source" "server/udev" 
    [   139.332] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse 
    [   139.332] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is a pointer caps 
    [   139.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046D:C00C.0001/input/input3/event3" 
    [   139.388] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8) 

  4. #4

    Default Re: KDE Plasma5 unable to start with Nvidia driver

    continue log file
    Code:
    ...
    [   139.388] (**) Option "AccelerationScheme" "none" 
    [   139.388] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 
    [   139.388] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 
    [   139.388] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 
    [   139.444] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse 
    [   139.444] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is a pointer caps 
    [   139.444] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) 
    [   139.444] (II) No input driver specified, ignoring this device. 
    [   139.444] (II) This device may have been added with another device file. 
    [   139.445] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5) 
    [   139.445] (II) No input driver specified, ignoring this device. 
    [   139.445] (II) This device may have been added with another device file. 
    [   139.445] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event6) 
    [   139.445] (II) No input driver specified, ignoring this device. 
    [   139.445] (II) This device may have been added with another device file. 
    [   139.445] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7) 
    [   139.445] (II) No input driver specified, ignoring this device. 
    [   139.445] (II) This device may have been added with another device file. 
    [   139.445] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event8) 
    [   139.446] (II) No input driver specified, ignoring this device. 
    [   139.446] (II) This device may have been added with another device file. 
    [   139.446] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9) 
    [   139.446] (II) No input driver specified, ignoring this device. 
    [   139.446] (II) This device may have been added with another device file. 
    [   139.446] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) 
    [   139.446] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" 
    [   139.446] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" 
    [   139.446] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" 
    [   139.446] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" 
    [   139.446] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' 
    [   139.446] (**) AT Translated Set 2 keyboard: always reports core events 
    [   139.446] (**) Option "Device" "/dev/input/event0" 
    [   139.446] (**) Option "_source" "server/udev" 
    [   139.447] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard 
    [   139.447] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard 
    [   139.480] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" 
    [   139.480] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) 
    [   139.480] (**) Option "xkb_model" "microsoftpro" 
    [   139.480] (**) Option "xkb_layout" "us" 
    [   139.480] (**) Option "xkb_variant" "intl" 
    [   139.480] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" 
    [   139.480] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard 
    [   139.480] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard 
    [   139.481] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) 
    [   139.481] (II) No input driver specified, ignoring this device. 
    [   139.481] (II) This device may have been added with another device file. 
    [   147.632] (II) UnloadModule: "libinput" 
    [   147.632] (II) UnloadModule: "libinput" 
    [   147.632] (II) UnloadModule: "libinput" 
    [   147.633] (II) UnloadModule: "libinput" 
    [   147.934] (II) Server terminated successfully (0). Closing log file.

  5. #5

    Default Re: KDE Plasma5 unable to start with Nvidia driver

    As I wrote it is intermittent issue, but so far is ok. I added myself into video group and also I installed KDE3 (together with 5) and then I uninstalled KDE3. It seems to be working, no reoccurrence after couple of reboots. The tmpfiles error is still there.

  6. #6

    Default Re: KDE Plasma5 unable to start with Nvidia driver

    I have been getting the same error but not ramdomly.
    I couldn't login in plasma. I have been login with xfce and it worked but with a bad resolution.
    I discovered that at least one of the nvidia packages installed version was from opensuse repos insted of nvidia repo, so I did a "switch system packages" to the nvidia repo and it solved it.

    regards

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •