Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

  1. #1

    Default Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Under Suse13.2 my Reiner-SCT cyberjack USB is detected when using opensc-tool -l , but on 42.2, with the same packages installed, it is not detected.

    installed packages on both systems:
    libpcsclite1, libpcsclite1-32bit,libpcscspy0,libpcscspy0-32bit,pcsc-cyberjack,pcsc-lite,pcsc-lite-devel,perl-pcsc,opensc on both systems the current versions as by YAST2

    On 13.2 opensc-tool -l gives
    # Detected readers (pcsc)
    Nr. Card Features Name
    0 Yes PIN pad REINER SCT cyberJack pp_a2 (3865505373) 00 00


    On 42.2 it gives
    No smart card readers found.
    When the reader is inserted, dmesg shows it:[ 6450.350733] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
    [ 6450.511958] usb 2-1.3: New USB device found, idVendor=0c4b, idProduct=0401
    [ 6450.511978] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 6450.511983] usb 2-1.3: Product: cyberJack e-com(f)
    [ 6450.511988] usb 2-1.3: Manufacturer: Reiner-SCT
    [ 6450.511991] usb 2-1.3: SerialNumber: 3865505373


    On a parallel installation of debian8 on the machine with 42.2, the Reiner-SCT is detected and works fine!!!

    What is the problem in 42.2?

    flexwippy

  2. #2
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,981

    Default AW: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Here with an cyberjack RFID standard it works:
    Code:
    Jul 10 15:42:50 linux64 kernel: usb 4-1.2: new full-speed USB device number 5 using ehci-pci
    Jul 10 15:42:50 linux64 kernel: usb 4-1.2: New USB device found, idVendor=0c4b, idProduct=0500
    Jul 10 15:42:50 linux64 kernel: usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Jul 10 15:42:50 linux64 kernel: usb 4-1.2: Product: cyberJack RFID standard
    Jul 10 15:42:50 linux64 kernel: usb 4-1.2: Manufacturer: REINER SCT
    Jul 10 15:42:50 linux64 kernel: usb 4-1.2: SerialNumber: 5801785180
    Jul 10 15:42:50 linux64 mtp-probe[8976]: checking bus 4, device 5: "/sys/devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.2"
    Jul 10 15:42:50 linux64 mtp-probe[8976]: bus: 4, device: 5 was not an MTP device
    Jul 10 15:42:50 linux64 systemd[1]: Reached target Smart Card.
    moneyplex is working with an hbci Card and the reader.

    Your reader is also in the pcsc Package:
    Code:
    cat /usr/lib/udev/rules.d/40-cyberjack.rules 
    SUBSYSTEM!="usb", GOTO="cyberjack_rules_end"
    ENV{DEVTYPE}!="usb_device", GOTO="cyberjack_rules_end"
    ACTION!="add", GOTO="cyberjack_rules_end"
    
    ENV{ID_USB_INTERFACES}=="", IMPORT{program}="usb_id --export %p"
    
    ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0100", ENV{ID_SMARTCARD_READER}="1"
    ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0300", ENV{ID_SMARTCARD_READER}="1"
    ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0400", ENV{ID_SMARTCARD_READER}="1"
    ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0401", ENV{ID_SMARTCARD_READER}="1"
    ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0500", ENV{ID_SMARTCARD_READER}="1"
    ATTRS{idVendor}=="0c4b", ATTRS{idProduct}=="0501", ENV{ID_SMARTCARD_READER}="1"
    
    LABEL="cyberjack_rules_end"
    In which Programm do you want to use ist?
    You can test it with pcsc-tools from the security Repo:
    http://download.opensuse.org/reposit...1.1.x86_64.rpm

  3. #3
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,981

    Default AW: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Post:
    Code:
    zypper se -si pcsc
    Code:
    zypper lr -d
    And please, use Code-Tags, better to read.......

  4. #4

    Default Re: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Thank you for the quick answer. I am not used to the fancy things in this forum. Sorry, I don't know how to add this code-type.

    After installing the pcsc-tools: no change, the reader is not seen.

    Here the Information from 42.2:

    zypper se -si pcsc
    Repository-Daten werden geladen...
    Installierte Pakete werden gelesen...

    S | Name | Typ | Version | Arch | Repository
    ---+--------------------+-------+----------------------+--------+---------------------------------------
    i+ | libpcsclite1 | Paket | 1.8.17-3.1 | x86_64 | Main Update Repository
    i+ | libpcsclite1 | Paket | 1.8.17-3.1 | x86_64 | openSUSE.orgpenSUSE:Leap:42.2:Update
    i+ | libpcsclite1-32bit | Paket | 1.8.17-3.1 | x86_64 | Main Update Repository
    i+ | libpcsclite1-32bit | Paket | 1.8.17-3.1 | x86_64 | openSUSE.orgpenSUSE:Leap:42.2:Update
    i+ | libpcscspy0 | Paket | 1.8.17-3.1 | x86_64 | Main Update Repository
    i+ | libpcscspy0 | Paket | 1.8.17-3.1 | x86_64 | openSUSE.orgpenSUSE:Leap:42.2:Update
    i+ | libpcscspy0-32bit | Paket | 1.8.17-3.1 | x86_64 | Main Update Repository
    i+ | libpcscspy0-32bit | Paket | 1.8.17-3.1 | x86_64 | openSUSE.orgpenSUSE:Leap:42.2:Update
    i+ | pcsc-acsccid | Paket | 1.1.3-1.1 | x86_64 | Main Repository (OSS)
    i+ | pcsc-acsccid | Paket | 1.1.3-1.1 | x86_64 | openSUSE-42.2-0
    i+ | pcsc-ccid | Paket | 1.4.25-1.1 | x86_64 | Main Repository (OSS)
    i+ | pcsc-ccid | Paket | 1.4.25-1.1 | x86_64 | openSUSE-42.2-0
    i+ | pcsc-cyberjack | Paket | 3.99.5final.SP09-1.1 | x86_64 | Main Repository (OSS)
    i+ | pcsc-cyberjack | Paket | 3.99.5final.SP09-1.1 | x86_64 | openSUSE-42.2-0
    i+ | pcsc-gempc | Paket | 1.0.7-11.2 | x86_64 | Main Repository (OSS)
    i+ | pcsc-gempc | Paket | 1.0.7-11.2 | x86_64 | openSUSE-42.2-0
    i+ | pcsc-lite | Paket | 1.8.17-3.1 | x86_64 | Main Update Repository
    i+ | pcsc-lite | Paket | 1.8.17-3.1 | x86_64 | openSUSE.orgpenSUSE:Leap:42.2:Update
    i+ | pcsc-lite-devel | Paket | 1.8.17-3.1 | x86_64 | Main Update Repository
    i+ | pcsc-lite-devel | Paket | 1.8.17-3.1 | x86_64 | openSUSE.orgpenSUSE:Leap:42.2:Update
    i+ | pcsc-tools | Paket | 1.5.2-1.1 | x86_64 | (Systempakete)
    i+ | pcsc-towitoko | Paket | 2.0.7-207.3 | x86_64 | Main Repository (OSS)
    i+ | pcsc-towitoko | Paket | 2.0.7-207.3 | x86_64 | openSUSE-42.2-0
    i+ | perl-pcsc | Paket | 1.4.13-4.2 | x86_64 | Main Repository (OSS)
    i+ | perl-pcsc | Paket | 1.4.13-4.2 | x86_64 | openSUSE-42.2-0

    zypper lr -d
    Die Repository-Priorit?ten sind ohne Effekt. Alle aktivierten Repositorys teilen sich die gleiche Priorit?t.

    # | Alias | Name | Aktiviert | GPG-?berpr?fung | Aktualisierung | Priorit?t | Typ | URI | Dienst
    ---+-------------------------------------+-----------------------------------------+-----------+-----------------+----------------+-----------+--------+--------------------------------------------------------------------------+-------
    1 | download.opensuse.org-non-oss | Main Repository (NON-OSS) | Ja | (r ) Ja | Ja | 99 | yast2 | http://download.opensuse.org/distrib.../repo/non-oss/ |
    2 | download.opensuse.org-non-oss_1 | Update Repository (Non-Oss) | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/update/leap/42.2/non-oss/ |
    3 | download.opensuse.org-oss | Main Repository (OSS) | Ja | (r ) Ja | Ja | 99 | yast2 | http://download.opensuse.org/distrib...42.2/repo/oss/ |
    4 | download.opensuse.org-oss_1 | Main Update Repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/update/leap/42.2/oss |
    5 | http-download.opensuse.org-79ca232e | openSUSE.orgpenSUSE:Leap:42.2:Update | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/update/leap/42.2/oss/ |
    6 | http-download.videolan.org-05cc1fd6 | SuSE | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.videolan.org/SuSE/Leap_42.2/ |
    7 | openSUSE-42.2-0 | openSUSE-42.2-0 | Ja | (r ) Ja | Ja | 99 | yast2 | http://download.opensuse.org/distrib...42.2/repo/oss/ |
    8 | repo-debug | openSUSE-Leap-42.2-Debug | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/d...42.2/repo/oss/ |
    9 | repo-debug-non-oss | openSUSE-Leap-42.2-Debug-Non-Oss | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/d.../repo/non-oss/ |
    10 | repo-debug-update | openSUSE-Leap-42.2-Update-Debug | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/u...leap/42.2/oss/ |
    11 | repo-debug-update-non-oss | openSUSE-Leap-42.2-Update-Debug-Non-Oss | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/u.../42.2/non-oss/ |
    12 | repo-source | openSUSE-Leap-42.2-Source | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/...42.2/repo/oss/ |
    13 | repo-source-non-oss | openSUSE-Leap-42.2-Source-Non-Oss | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/.../repo/non-oss/ |

    Sorry again!
    flexwippi

  5. #5
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,981

    Default AW: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Sorry, I don't know how to add this code-type.
    Hoover over the Icons above in your Answer:


    And copy your Paste between the middle ][

    (code]Text[/code)

  6. #6
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    25,158

    Default Re: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Quote Originally Posted by flexwippi View Post
    Thank you for the quick answer. I am not used to the fancy things in this forum. Sorry, I don't know how to add this code-type.
    Please in the future use CODE tags around copied/pasted computer text in a post. It is the # button in the tool bar of the post editor. When applicable copy/paste complete, that is including the prompt, the command, the output and the next prompt.
    Henk van Velden

  7. #7
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,981

    Default AW: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    After installing the pcsc-tools: no change, the reader is not seen.
    Then it will not work.....


    Only you can see, whats the Output of a Comannd is, but:
    not working
    is no Error.
    So post the complete Output inc. the Input Command and the complete Input Line.

    Use Code-Tags.

    Do you Upgrade from 13.2 to 42.2?
    Or is it a fresh Installation?

  8. #8

    Default Re: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Ok, thank you for the help.
    Here again with code:
    as said, the reader is not seen, when using pcsc_scan, the code waits to see the first reader. Consistent with opensc-tool -l

    Code:
    zypper se -si pcsc
    Repository-Daten werden geladen...
    Installierte Pakete werden gelesen...
    
    S  | Name               | Typ   | Version              | Arch   | Repository                            
    ---+--------------------+-------+----------------------+--------+---------------------------------------
    i+ | libpcsclite1       | Paket | 1.8.17-3.1           | x86_64 | Main Update Repository                
    i+ | libpcsclite1       | Paket | 1.8.17-3.1           | x86_64 | openSUSE.org:openSUSE:Leap:42.2:Update
    i+ | libpcsclite1-32bit | Paket | 1.8.17-3.1           | x86_64 | Main Update Repository                
    i+ | libpcsclite1-32bit | Paket | 1.8.17-3.1           | x86_64 | openSUSE.org:openSUSE:Leap:42.2:Update
    i+ | libpcscspy0        | Paket | 1.8.17-3.1           | x86_64 | Main Update Repository                
    i+ | libpcscspy0        | Paket | 1.8.17-3.1           | x86_64 | openSUSE.org:openSUSE:Leap:42.2:Update
    i+ | libpcscspy0-32bit  | Paket | 1.8.17-3.1           | x86_64 | Main Update Repository                
    i+ | libpcscspy0-32bit  | Paket | 1.8.17-3.1           | x86_64 | openSUSE.org:openSUSE:Leap:42.2:Update
    i+ | pcsc-acsccid       | Paket | 1.1.3-1.1            | x86_64 | Main Repository (OSS)                 
    i+ | pcsc-acsccid       | Paket | 1.1.3-1.1            | x86_64 | openSUSE-42.2-0                       
    i+ | pcsc-ccid          | Paket | 1.4.25-1.1           | x86_64 | Main Repository (OSS)                 
    i+ | pcsc-ccid          | Paket | 1.4.25-1.1           | x86_64 | openSUSE-42.2-0                       
    i+ | pcsc-cyberjack     | Paket | 3.99.5final.SP09-1.1 | x86_64 | Main Repository (OSS)                 
    i+ | pcsc-cyberjack     | Paket | 3.99.5final.SP09-1.1 | x86_64 | openSUSE-42.2-0                       
    i+ | pcsc-gempc         | Paket | 1.0.7-11.2           | x86_64 | Main Repository (OSS)                 
    i+ | pcsc-gempc         | Paket | 1.0.7-11.2           | x86_64 | openSUSE-42.2-0                       
    i+ | pcsc-lite          | Paket | 1.8.17-3.1           | x86_64 | Main Update Repository                
    i+ | pcsc-lite          | Paket | 1.8.17-3.1           | x86_64 | openSUSE.org:openSUSE:Leap:42.2:Update
    i+ | pcsc-lite-devel    | Paket | 1.8.17-3.1           | x86_64 | Main Update Repository                
    i+ | pcsc-lite-devel    | Paket | 1.8.17-3.1           | x86_64 | openSUSE.org:openSUSE:Leap:42.2:Update
    i+ | pcsc-tools         | Paket | 1.5.2-1.1            | x86_64 | (Systempakete)                        
    i+ | pcsc-towitoko      | Paket | 2.0.7-207.3          | x86_64 | Main Repository (OSS)                 
    i+ | pcsc-towitoko      | Paket | 2.0.7-207.3          | x86_64 | openSUSE-42.2-0                       
    i+ | perl-pcsc          | Paket | 1.4.13-4.2           | x86_64 | Main Repository (OSS)                 
    i+ | perl-pcsc          | Paket | 1.4.13-4.2           | x86_64 | openSUSE-42.2-0
    Code:
    zypper lr -d
    Die Repository-Priorit?ten sind ohne Effekt. Alle aktivierten Repositorys teilen sich die gleiche Priorit?t.
    
    #  | Alias                               | Name                                    | Aktiviert | GPG-?berpr?fung | Aktualisierung | Priorit?t | Typ    | URI                                                                      | Dienst
    ---+-------------------------------------+-----------------------------------------+-----------+-----------------+----------------+-----------+--------+--------------------------------------------------------------------------+-------
     1 | download.opensuse.org-non-oss       | Main Repository (NON-OSS)               | Ja        | (r ) Ja         | Ja             |   99      | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/non-oss/        |       
     2 | download.opensuse.org-non-oss_1     | Update Repository (Non-Oss)             | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/42.2/non-oss/                   |       
     3 | download.opensuse.org-oss           | Main Repository (OSS)                   | Ja        | (r ) Ja         | Ja             |   99      | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/oss/            |       
     4 | download.opensuse.org-oss_1         | Main Update Repository                  | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/42.2/oss                        |       
     5 | http-download.opensuse.org-79ca232e | openSUSE.org:openSUSE:Leap:42.2:Update  | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/42.2/oss/                       |       
     6 | http-download.videolan.org-05cc1fd6 | SuSE                                    | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.videolan.org/SuSE/Leap_42.2/                             |       
     7 | openSUSE-42.2-0                     | openSUSE-42.2-0                         | Ja        | (r ) Ja         | Ja             |   99      | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/oss/            |       
     8 | repo-debug                          | openSUSE-Leap-42.2-Debug                | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/distribution/leap/42.2/repo/oss/      |       
     9 | repo-debug-non-oss                  | openSUSE-Leap-42.2-Debug-Non-Oss        | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/distribution/leap/42.2/repo/non-oss/  |       
    10 | repo-debug-update                   | openSUSE-Leap-42.2-Update-Debug         | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/42.2/oss/                 |       
    11 | repo-debug-update-non-oss           | openSUSE-Leap-42.2-Update-Debug-Non-Oss | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/42.2/non-oss/             |       
    12 | repo-source                         | openSUSE-Leap-42.2-Source               | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/source/distribution/leap/42.2/repo/oss/     |       
    13 | repo-source-non-oss                 | openSUSE-Leap-42.2-Source-Non-Oss       | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/source/distribution/leap/42.2/repo/non-oss/ |

  9. #9
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,981

    Default AW: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    Double Repos:
    aas root:
    Code:
    zypper rr http-download.opensuse.org-79ca232e
    Code:
    zypper rr openSUSE-42.2-0
    Better Than Videolan is Packman, same Packages and more inside:
    Remove Videolan:
    Code:
    zypper rr http://download.videolan.org/SuSE/Leap_42.2/
    add Packman:
    Code:
    zypper ar -f http://ftp.halifax.rwth-aachen.de/packman/suse/openSUSE_Leap_42.2/ packman
    Priority for Packman
    Code:
    zypper mr -p 20 http://ftp.halifax.rwth-aachen.de/packman/suse/openSUSE_Leap_42.2/
    dup to Packman:
    Code:
    zypper dup --from http://ftp.halifax.rwth-aachen.de/packman/suse/openSUSE_Leap_42.2/
    After that, both Commands from above and:
    Code:
    pcsc_scan
    Here:
    Code:
    pcsc_scan
    PC/SC device scanner
    V 1.5.2 (c) 2001-2017, Ludovic Rousseau <ludovic.rousseau@free.fr>
    Using reader plug'n play mechanism
    Scanning present readers...
    0: REINER SCT cyberJack RFID standard (5801785180) 00 00
     
    Mon Jul 10 17:09:18 2017
     Reader 0: REINER SCT cyberJack RFID standard (5801785180) 00 00
      Card state: Card removed, 
       
    Mon Jul 10 17:09:54 2017
     Reader 0: REINER SCT cyberJack RFID standard (5801785180) 00 00
      Card state: Card inserted, 
    .
    .
    .
    .
    .
    .
    Last edited by Sauerland; 10-Jul-2017 at 08:13. Reason: ui German

  10. #10
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    11,299
    Blog Entries
    2

    Default Re: Reiner-SCT-Reader cyberjack USB not detected on Leap 42.*

    @flexwippi, @saurland,

    It looks like your two devices are recognized, but as different devices.
    Perhaps you should start with describing more exactly what your hardware devices are(possibly looking at printed labels or running tools) to determine whether the differences are significant... and perhaps do a Google search to determine support in the kernel you're running, comparing to the other distros that are working.

    Remember that 13.2 was generally running early 3.x kernels whereas LEAP today is running 4.x kernels and there are some significant architectural changes and possibly different support for hardware.

    HTH,
    TSU
    Beginner Wiki Quickstart - https://en.opensuse.org/User:Tsu2/Quickstart_Wiki
    Solved a problem recently? Create a wiki page for future personal reference!
    Learn something new?
    Attended a computing event?
    Post and Share!

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •