Schwere Probleme nach letzten Updates

Deutsch (German) Installation/Administration
1

Hallo,

ich habe mit meiner Leap 42.2-Installation auf einem HP Elitebook 8440p mit NVidia-Grafik seit den Updates in dieser Woche (KW 20, 2017) verschiedene erhebliche Probleme. Das System lief bislang vollkommen ohne ersichtliche Probleme. Ich verwende das Standard-KDE von Leap 42.2 und den NVidia-Treiber. An der Installation habe ich nichts geändert.

  • Samba-shares lassen sich nicht mehr mit Smb4k einbinden. Ich verwende Smb4k, da ich u.a. auf ein NAS zugreife, welches nicht immer erreichbar ist. Daher binde ich es nicht beim booten ein, sondern nur bei Bedarf - möchte dann aber als normaler User RW-Rechte haben, was mit Smb4k sehr einfach geht. Seit letzter woche aber plötzlich nicht mehr. Ich habe daraufhin die Konfiguration von Smb4k komplett zurückgesetzt, Smb4k neu installiert, auch eine andere Version installiert, etc. Smb$k findet die Shares und Folder, aber wenn ich diese mounten will, läuft es in eine Endlosschleife. Meine Verdacht waren auch neue Firewall-Settings oder so, deshalb habe ich auch diese untersucht, aber nichts gefunden.

  • Virtualbox: Ich verwende die neueste Version von VB, es gab in der letzten Woche kein neues Update, und alles lief bestens. Seit einer Woche friert das gesamte System (!!!) ein, wenn ich versuche, eine VM (Windows 10) mit VB zu starten - das heißt: Mauszeiger firert ein, Bildschirm wird Schwarz, System ist auch mit Tastatur nicht mehr erreichbar, es hilft nur ein “hartes” Ausschalten.

  • Fenstermanager hat Grafikfehler: ZB sind plötzlich die Icons in der rechtne oberen Ecke der Fenster nicht mehr sichtbar.

  • Control-Panel von KDE ist plötzlich weg.

Da dies alles gemeinsam aufgetreten ist mache ich nicht für jedes Problem verschiedene Themen auf. Ich habe verschiedene Dinge in Verdacht: generelle Probleme mit dem Kernel (ich meine, da gabe es ein update); Probleme durch security-settings nach Update, Probleme des NVidia-Treibers (ich meine, da gab es in den letzten Wochen kein Update).

Kann jemand helfen oder die Probleme bestätigen? Danke!

Gruß

Eriol

2

Richtig.
Das openSUSE Security Team hat eine Sicherheitslücke entdeckt und daher den Mount-Helper entfernt.
(eigentlich haben sie zuerst mal das Paket komplett aus der Distribution gelöscht).
https://bugzilla.opensuse.org/show_bug.cgi?id=1033300

D.h. mounten geht momentan nicht mehr.

In der nächsten Version von smb4k sollte die Schwachstelle beseitigt sein, allerdings müssen wir dann auch noch durch einen neuen Security-Audit um den Mounthelper wieder aktivieren zu können…

Ansonsten hab ich keine der genannten Probleme. Allerdings benutze ich auch nicht den NVidia-Treiber oder eine NVidia Karte.

Ich würd aber mal in die Datei /var/log/Xorg.0.log schauen ob der Treiber überhaupt geladen wird, bzw. mit “glxinfo | grep render” prüfen ob OpenGL funktioniert.
Könnte natürlich auch ein Hardware-problem sein, z.B. Überhitzung.

3

Bitte auch einmal die Ausgabe von:

zypper lr -d
4 

Die Repository-Prioritäten sind ohne Effekt. Alle aktivierten Repositorys teilen sich die gleiche Priorität.


#  | Alias                               | Name                                                    | Aktiviert | GPG-Überprüfung | Aktualisierung | Priorität | Typ    | URI                                                                                | Dienst
---+-------------------------------------+---------------------------------------------------------+-----------+-----------------+----------------+-----------+--------+------------------------------------------------------------------------------------+-------
 1 | Graphics                            | Graphics                                                | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/graphics/openSUSE_Leap_42.2/             |       
 2 | KDE-Applications                    | KDE-Applications                                        | Nein      | ----            | ----           |   99      | rpm-md | http://download.opensuse.org/repositories/KDE:/Applications/openSUSE_Leap_42.2/    |       
 3 | KDE-Extra                           | KDE-Extra                                               | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/KDE:/Extra/openSUSE_Leap_42.2/           |       
 4 | LibreOffice                         | LibreOffice                                             | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/LibreOffice:/5.3/openSUSE_Leap_42.2/     |       
 5 | StopMotion                          | StopMotion                                              | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/home:/zhonghuaren/Fedora_24/             |       
 6 | Virtualbox                          | Virtualbox                                              | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.virtualbox.org/virtualbox/rpm/opensuse/13.2                        |       
 7 | download.nvidia.com-leap            | nVidia Graphics Drivers                                 | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.nvidia.com/opensuse/leap/42.2                                      |       
 8 | download.opensuse.org-non-oss       | Haupt-Repository (NON-OSS)                              | Ja        | (r ) Ja         | Ja             |   99      | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/non-oss/                  |       
 9 | download.opensuse.org-non-oss_1     | Aktualisierungs-Repository (Nicht-Open-Source-Software) | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/42.2/non-oss/                             |       
10 | download.opensuse.org-oss           | Haupt-Repository (OSS)                                  | Ja        | (r ) Ja         | Ja             |   99      | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/oss/                      |       
11 | download.opensuse.org-oss_1         | Hauptaktualisierungs-Repository                         | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/42.2/oss                                  |       
12 | google-chrome                       | google-chrome                                           | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://dl.google.com/linux/chrome/rpm/stable/x86_64                                |       
13 | http-download.opensuse.org-a62984f3 | LibreOffice:Factory                                     | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/LibreOffice:/Factory/openSUSE_Leap_42.2/ |       
14 | http-download.opensuse.org-b4c7e517 | openSUSE:Leap:42.2:Update                               | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/openSUSE:/Leap:/42.2:/Update/standard/   |       
15 | http-download.opensuse.org-e40ec3b3 | home:ecsos                                              | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/home:/ecsos/openSUSE_Leap_42.2/          |       
16 | openSUSE-42.2-0                     | openSUSE-42.2-0                                         | Nein      | ----            | ----           |   99      | yast2  | hd:///?device=/dev/disk/by-id/usb-Verbatim_STORE_N_GO_04772600000005DF-0:0-part2   |       
17 | opensuse-guide.org-repo             | Libdvdcss Repository                                    | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_42.2/                                 |       
18 | packman.inode.at-suse               | Packman Repository                                      | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://packman.inode.at/suse/openSUSE_Leap_42.2/                                   |       
19 | repo-debug                          | openSUSE-Leap-42.2-Debug                                | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/distribution/leap/42.2/repo/oss/                |       
20 | repo-debug-non-oss                  | openSUSE-Leap-42.2-Debug-Non-Oss                        | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/distribution/leap/42.2/repo/non-oss/            |       
21 | repo-debug-update                   | openSUSE-Leap-42.2-Update-Debug                         | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/42.2/oss/                           |       
22 | repo-debug-update-non-oss           | openSUSE-Leap-42.2-Update-Debug-Non-Oss                 | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/42.2/non-oss/                       |       
23 | repo-source                         | openSUSE-Leap-42.2-Source                               | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/source/distribution/leap/42.2/repo/oss/               |       
24 | repo-source-non-oss                 | openSUSE-Leap-42.2-Source-Non-Oss                       | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/source/distribution/leap/42.2/repo/non-oss/           |
5

Hallo, und hier der log - zumindest scheint der nvidia-Treiber doch zu laufen …?!?

     8.780] (--) Log file renamed from "/var/log/Xorg.pid-2125.log" to "/var/log/Xorg.0.log"     8.781] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
     8.781] X Protocol Version 11, Revision 0
     8.781] Build Operating System: openSUSE SUSE LINUX
     8.781] Current Operating System: Linux linux-u7cl.suse 4.4.62-18.6-default #1 SMP Fri Apr 21 16:14:48 UTC 2017 (84f9824) x86_64
     8.781] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.62-18.6-default root=UUID=9a3503b2-1b8b-4f8a-bdde-b47d4988a0ae resume=/dev/disk/by-uuid/3c0dbac5-ddb3-4d96-9a20-456c2d82a7c7 splash=silent quiet showopts
     8.781] Build Date: 20 April 2017  02:50:55PM
     8.781]  
     8.781] Current version of pixman: 0.34.0
     8.781] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
     8.781] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
     8.782] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 22 17:15:42 2017
     8.783] (==) Using config directory: "/etc/X11/xorg.conf.d"
     8.783] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
     8.783] (==) No Layout section.  Using the first Screen section.
     8.784] (==) No screen section available. Using defaults.
     8.784] (**) |-->Screen "Default Screen Section" (0)
     8.784] (**) |   |-->Monitor "<default monitor>"
     8.784] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
     8.784] (==) Automatically adding devices
     8.784] (==) Automatically enabling devices
     8.784] (==) Automatically adding GPU devices
     8.784] (==) Max clients allowed: 256, resource mask: 0x1fffff
     8.788] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
     8.788] 	Entry deleted from font path.
     8.788] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
     8.788] (==) ModulePath set to "/usr/lib64/xorg/modules"
     8.788] (**) Extension "XFree86-DGA" is disabled
     8.788] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
     8.788] (II) Loader magic: 0x80fce0
     8.788] (II) Module ABI versions:
     8.788] 	X.Org ANSI C Emulation: 0.4
     8.788] 	X.Org Video Driver: 20.0
     8.788] 	X.Org XInput driver : 22.1
     8.788] 	X.Org Server Extension : 9.0
     8.789] (++) using VT number 7


     8.789] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
     8.790] (II) xfree86: Adding drm device (/dev/dri/card0)
     8.791] (--) PCI:*(0:1:0:0) 10de:0a6c:103c:172b rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
     8.791] (II) LoadModule: "glx"
     8.793] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
     8.993] (II) Module glx: vendor="NVIDIA Corporation"
     8.993] 	compiled for 4.0.2, module version = 1.0.0
     8.993] 	Module class: X.Org Server Extension
     8.993] (II) NVIDIA GLX Module  340.102  Mon Jan 16 12:37:38 PST 2017
     8.993] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
     8.994] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
     8.994] (==) Matched nvidia as autoconfigured driver 0
     8.994] (==) Matched nouveau as autoconfigured driver 1
     8.994] (==) Matched nv as autoconfigured driver 2
     8.994] (==) Matched nvidia as autoconfigured driver 3
     8.994] (==) Matched nouveau as autoconfigured driver 4
     8.994] (==) Matched nv as autoconfigured driver 5
     8.994] (==) Matched modesetting as autoconfigured driver 6
     8.994] (==) Matched fbdev as autoconfigured driver 7
     8.994] (==) Matched vesa as autoconfigured driver 8
     8.994] (==) Assigned the driver to the xf86ConfigLayout
     8.994] (II) LoadModule: "nvidia"
     8.994] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
     9.015] (II) Module nvidia: vendor="NVIDIA Corporation"
     9.015] 	compiled for 4.0.2, module version = 1.0.0
     9.015] 	Module class: X.Org Video Driver
     9.032] (II) LoadModule: "nouveau"
     9.032] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
     9.034] (II) Module nouveau: vendor="X.Org Foundation"
     9.034] 	compiled for 1.18.3, module version = 1.0.12
     9.034] 	Module class: X.Org Video Driver
     9.034] 	ABI class: X.Org Video Driver, version 20.0
     9.034] (II) LoadModule: "nv"
     9.034] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
     9.036] (II) Module nv: vendor="X.Org Foundation"
     9.036] 	compiled for 1.18.3, module version = 2.1.20
     9.036] 	Module class: X.Org Video Driver
     9.036] 	ABI class: X.Org Video Driver, version 20.0
     9.036] (II) LoadModule: "modesetting"
     9.036] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
     9.037] (II) Module modesetting: vendor="X.Org Foundation"
     9.037] 	compiled for 1.18.3, module version = 1.18.3
     9.037] 	Module class: X.Org Video Driver
     9.037] 	ABI class: X.Org Video Driver, version 20.0
     9.037] (II) LoadModule: "fbdev"
     9.037] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
     9.038] (II) Module fbdev: vendor="X.Org Foundation"
     9.038] 	compiled for 1.18.3, module version = 0.4.4
     9.038] 	Module class: X.Org Video Driver
     9.038] 	ABI class: X.Org Video Driver, version 20.0
     9.038] (II) LoadModule: "vesa"
     9.038] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
     9.039] (II) Module vesa: vendor="X.Org Foundation"
     9.039] 	compiled for 1.18.3, module version = 2.3.4
     9.039] 	Module class: X.Org Video Driver
     9.039] 	ABI class: X.Org Video Driver, version 20.0
     9.039] (II) NVIDIA dlloader X Driver  340.102  Mon Jan 16 12:17:09 PST 2017
     9.039] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
     9.039] (II) NOUVEAU driver 
     9.039] (II) NOUVEAU driver for NVIDIA chipset families :
     9.039] 	RIVA TNT        (NV04)
     9.039] 	RIVA TNT2       (NV05)
     9.039] 	GeForce 256     (NV10)
     9.039] 	GeForce 2       (NV11, NV15)
     9.039] 	GeForce 4MX     (NV17, NV18)
     9.039] 	GeForce 3       (NV20)
     9.039] 	GeForce 4Ti     (NV25, NV28)
     9.039] 	GeForce FX      (NV3x)
     9.039] 	GeForce 6       (NV4x)
     9.039] 	GeForce 7       (G7x)
     9.039] 	GeForce 8       (G8x)
     9.039] 	GeForce GTX 200 (NVA0)
     9.039] 	GeForce GTX 400 (NVC0)
     9.039] (II) NOUVEAU driver 
     9.039] (II) NOUVEAU driver for NVIDIA chipset families :
     9.039] 	RIVA TNT        (NV04)
     9.039] 	RIVA TNT2       (NV05)
     9.039] 	GeForce 256     (NV10)
     9.039] 	GeForce 2       (NV11, NV15)
     9.039] 	GeForce 4MX     (NV17, NV18)
     9.039] 	GeForce 3       (NV20)
     9.039] 	GeForce 4Ti     (NV25, NV28)
     9.039] 	GeForce FX      (NV3x)
     9.039] 	GeForce 6       (NV4x)
     9.039] 	GeForce 7       (G7x)
     9.039] 	GeForce 8       (G8x)
     9.039] 	GeForce GTX 200 (NVA0)
     9.040] 	GeForce GTX 400 (NVC0)
     9.040] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
     9.040] (II) FBDEV: driver for framebuffer: fbdev
     9.040] (II) VESA: driver for VESA chipsets: vesa
     9.072] (II) Loading sub module "fb"
     9.072] (II) LoadModule: "fb"
     9.073] (II) Loading /usr/lib64/xorg/modules/libfb.so
     9.074] (II) Module fb: vendor="X.Org Foundation"
     9.074] 	compiled for 1.18.3, module version = 1.0.0
     9.074] 	ABI class: X.Org ANSI C Emulation, version 0.4
     9.074] (WW) Unresolved symbol: fbGetGCPrivateKey
     9.074] (II) Loading sub module "wfb"
     9.074] (II) LoadModule: "wfb"
     9.074] (II) Loading /usr/lib64/xorg/modules/libwfb.so
     9.076] (II) Module wfb: vendor="X.Org Foundation"
     9.076] 	compiled for 1.18.3, module version = 1.0.0
     9.076] 	ABI class: X.Org ANSI C Emulation, version 0.4
     9.076] (II) Loading sub module "ramdac"
     9.076] (II) LoadModule: "ramdac"
     9.076] (II) Module "ramdac" already built-in
     9.077] (WW) Falling back to old probe method for modesetting
     9.077] (WW) Falling back to old probe method for fbdev
     9.077] (II) Loading sub module "fbdevhw"
     9.077] (II) LoadModule: "fbdevhw"
     9.077] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
     9.078] (II) Module fbdevhw: vendor="X.Org Foundation"
     9.078] 	compiled for 1.18.3, module version = 0.0.2
     9.078] 	ABI class: X.Org Video Driver, version 20.0
     9.078] (WW) Falling back to old probe method for vesa
     9.078] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
     9.078] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
     9.078] (==) NVIDIA(0): RGB weight 888
     9.078] (==) NVIDIA(0): Default visual is TrueColor
     9.078] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
     9.078] (**) NVIDIA(0): Enabling 2D acceleration
    10.191] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    10.193] (II) NVIDIA(0): NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0)
    10.193] (--) NVIDIA(0): Memory: 524288 kBytes
    10.193] (--) NVIDIA(0): VideoBIOS: 70.18.49.03.03
    10.193] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    10.437] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-3)) does not support
    10.437] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
    10.437] (--) NVIDIA(0): Valid display device(s) on NVS 3100M at PCI:1:0:0
    10.437] (--) NVIDIA(0):     CRT-0
    10.437] (--) NVIDIA(0):     DFP-0
    10.437] (--) NVIDIA(0):     DFP-1
    10.437] (--) NVIDIA(0):     DFP-2
    10.437] (--) NVIDIA(0):     AU Optronics Corporation (DFP-3) (boot, connected)
    10.437] (--) NVIDIA(0):     DFP-4
    10.437] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    10.437] (--) NVIDIA(0): DFP-0: Internal TMDS
    10.437] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
    10.437] (--) NVIDIA(0): DFP-1: Internal TMDS
    10.437] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    10.437] (--) NVIDIA(0): DFP-2: Internal DisplayPort
    10.437] (--) NVIDIA(GPU-0): DFP-2: 480.0 MHz maximum pixel clock
    10.437] (--) NVIDIA(0): AU Optronics Corporation (DFP-3): Internal DisplayPort
    10.437] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-3): 480.0 MHz maximum pixel clock
    10.437] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    10.437] (--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
    10.437] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    10.437] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-3) (Using EDID
    10.437] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
    11.478] (==) NVIDIA(0): 
    11.478] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    11.478] (==) NVIDIA(0):     will be used as the requested mode.
    11.478] (==) NVIDIA(0): 
    11.478] (II) NVIDIA(0): Validated MetaModes:
    11.478] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select"
    11.479] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 900
    11.486] (--) NVIDIA(0): DPI set to (131, 134); computed from "UseEdidDpi" X config
    11.486] (--) NVIDIA(0):     option
    11.486] (II) UnloadModule: "nouveau"
    11.486] (II) Unloading nouveau
    11.486] (II) UnloadModule: "nv"
    11.486] (II) Unloading nv
    11.486] (II) UnloadModule: "modesetting"
    11.486] (II) Unloading modesetting
    11.486] (II) UnloadModule: "fbdev"
    11.486] (II) Unloading fbdev
    11.486] (II) UnloadSubModule: "fbdevhw"
    11.486] (II) Unloading fbdevhw
    11.487] (II) UnloadModule: "vesa"
    11.487] (II) Unloading vesa
    11.487] (--) Depth 24 pixmap format is 32 bpp
    11.487] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    11.492] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    11.492] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
    11.492] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
    11.492] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
    11.492] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
    11.492] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
    11.492] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
    11.492] (II) NVIDIA(0):     Config Options in the README.
    11.521] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
    11.801] (==) NVIDIA(0): Disabling shared memory pixmaps
    11.801] (==) NVIDIA(0): Backing store enabled
    11.801] (==) NVIDIA(0): Silken mouse enabled
    11.801] (==) NVIDIA(0): DPMS enabled
    11.801] (II) Loading sub module "dri2"
    11.801] (II) LoadModule: "dri2"
    11.801] (II) Module "dri2" already built-in
    11.801] (II) NVIDIA(0): [DRI2] Setup complete
    11.801] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
    11.801] (--) RandR disabled
    11.805] (II) Initializing extension GLX
    11.805] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event4)

…

6

Fortsetzung:

    11.903] (**) Power Button: Applying InputClass "evdev keyboard catchall"    11.903] (**) Power Button: Applying InputClass "system-keyboard"
    11.903] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    11.903] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    11.903] (II) LoadModule: "libinput"
    11.903] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
    11.910] (II) Module libinput: vendor="X.Org Foundation"
    11.910]     compiled for 1.18.3, module version = 0.19.1
    11.910]     Module class: X.Org XInput Driver
    11.910]     ABI class: X.Org XInput driver, version 22.1
    11.910] (II) Using input driver 'libinput' for 'Power Button'
    11.910] (**) Power Button: always reports core events
    11.910] (**) Option "Device" "/dev/input/event4"
    11.910] (**) Option "_source" "server/udev"
    11.910] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
    11.910] (II) input device 'Power Button', /dev/input/event4 is a keyboard
    11.924] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input15/event4"
    11.924] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    11.924] (**) Option "xkb_model" "pc105"
    11.924] (**) Option "xkb_layout" "de"
    11.924] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    11.963] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
    11.963] (II) input device 'Power Button', /dev/input/event4 is a keyboard
    11.964] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    11.964] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    11.964] (**) Video Bus: Applying InputClass "system-keyboard"
    11.964] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    11.964] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
    11.964] (II) Using input driver 'libinput' for 'Video Bus'
    11.964] (**) Video Bus: always reports core events
    11.964] (**) Option "Device" "/dev/input/event5"
    11.964] (**) Option "_source" "server/udev"
    11.965] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
    11.965] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
    12.004] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input16/event5"
    12.004] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    12.004] (**) Option "xkb_model" "pc105"
    12.004] (**) Option "xkb_layout" "de"
    12.004] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    12.005] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
    12.005] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
    12.005] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    12.005] (II) No input driver specified, ignoring this device.
    12.005] (II) This device may have been added with another device file.
    12.006] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    12.006] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    12.006] (**) Sleep Button: Applying InputClass "system-keyboard"
    12.006] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    12.006] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
    12.006] (II) Using input driver 'libinput' for 'Sleep Button'
    12.006] (**) Sleep Button: always reports core events
    12.006] (**) Option "Device" "/dev/input/event2"
    12.006] (**) Option "_source" "server/udev"
    12.007] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
    12.007] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
    12.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13/event2"
    12.020] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    12.020] (**) Option "xkb_model" "pc105"
    12.020] (**) Option "xkb_layout" "de"
    12.020] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    12.020] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
    12.020] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
    12.021] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    12.021] (II) No input driver specified, ignoring this device.
    12.021] (II) This device may have been added with another device file.
    12.022] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    12.022] (II) No input driver specified, ignoring this device.
    12.022] (II) This device may have been added with another device file.
    12.022] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
    12.022] (II) No input driver specified, ignoring this device.
    12.022] (II) This device may have been added with another device file.
    12.023] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
    12.023] (II) No input driver specified, ignoring this device.
    12.023] (II) This device may have been added with another device file.
    12.024] (II) config/udev: Adding input device HP Webcam [2 MP Macro] (/dev/input/event10)
    12.024] (**) HP Webcam [2 MP Macro]: Applying InputClass "evdev keyboard catchall"
    12.024] (**) HP Webcam [2 MP Macro]: Applying InputClass "system-keyboard"
    12.024] (**) HP Webcam [2 MP Macro]: Applying InputClass "evdev keyboard catchall"
    12.024] (**) HP Webcam [2 MP Macro]: Applying InputClass "libinput keyboard catchall"
    12.024] (II) Using input driver 'libinput' for 'HP Webcam [2 MP Macro]'
    12.024] (**) HP Webcam [2 MP Macro]: always reports core events
    12.024] (**) Option "Device" "/dev/input/event10"
    12.024] (**) Option "_source" "server/udev"
    12.025] (II) input device 'HP Webcam [2 MP Macro]', /dev/input/event10 is tagged by udev as: Keyboard
    12.025] (II) input device 'HP Webcam [2 MP Macro]', /dev/input/event10 is a keyboard
    12.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input22/event10"
    12.080] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Macro]" (type: KEYBOARD, id 9)
    12.080] (**) Option "xkb_model" "pc105"
    12.080] (**) Option "xkb_layout" "de"
    12.080] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    12.081] (II) input device 'HP Webcam [2 MP Macro]', /dev/input/event10 is tagged by udev as: Keyboard
    12.081] (II) input device 'HP Webcam [2 MP Macro]', /dev/input/event10 is a keyboard
    12.081] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    12.081] (II) No input driver specified, ignoring this device.
    12.081] (II) This device may have been added with another device file.
    12.082] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event12)
    12.082] (II) No input driver specified, ignoring this device.
    12.082] (II) This device may have been added with another device file.
    12.083] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event13)
    12.083] (II) No input driver specified, ignoring this device.
    12.083] (II) This device may have been added with another device file.
    12.083] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event14)
    12.083] (II) No input driver specified, ignoring this device.
    12.083] (II) This device may have been added with another device file.
    12.084] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event15)
    12.084] (II) No input driver specified, ignoring this device.
    12.084] (II) This device may have been added with another device file.
    12.085] (II) config/udev: Adding input device HID 04b3:310b (/dev/input/event6)
    12.085] (**) HID 04b3:310b: Applying InputClass "evdev pointer catchall"
    12.085] (**) HID 04b3:310b: Applying InputClass "evdev pointer catchall"
    12.085] (**) HID 04b3:310b: Applying InputClass "libinput pointer catchall"
    12.085] (II) Using input driver 'libinput' for 'HID 04b3:310b'
    12.085] (**) HID 04b3:310b: always reports core events
    12.085] (**) Option "Device" "/dev/input/event6"
    12.086] (**) Option "_source" "server/udev"
    12.140] (II) input device 'HID 04b3:310b', /dev/input/event6 is tagged by udev as: Mouse
    12.140] (II) input device 'HID 04b3:310b', /dev/input/event6 is a pointer caps
    12.168] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04B3:310B.0001/input/input17/event6"
    12.168] (II) XINPUT: Adding extended input device "HID 04b3:310b" (type: MOUSE, id 10)
    12.168] (**) Option "AccelerationScheme" "none"
    12.168] (**) HID 04b3:310b: (accel) selected scheme none/0
    12.168] (**) HID 04b3:310b: (accel) acceleration factor: 2.000
    12.168] (**) HID 04b3:310b: (accel) acceleration threshold: 4
    12.224] (II) input device 'HID 04b3:310b', /dev/input/event6 is tagged by udev as: Mouse
    12.224] (II) input device 'HID 04b3:310b', /dev/input/event6 is a pointer caps
    12.225] (II) config/udev: Adding input device HID 04b3:310b (/dev/input/mouse1)
    12.225] (II) No input driver specified, ignoring this device.
    12.225] (II) This device may have been added with another device file.
    12.226] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
    12.226] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    12.226] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    12.226] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    12.226] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
    12.226] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
    12.226] (**) AT Translated Set 2 keyboard: always reports core events
    12.226] (**) Option "Device" "/dev/input/event1"
    12.226] (**) Option "_source" "server/udev"
    12.227] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is tagged by udev as: Keyboard
    12.227] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is a keyboard
    12.256] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event1"
    12.256] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    12.256] (**) Option "xkb_model" "pc105"
    12.256] (**) Option "xkb_layout" "de"
    12.256] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    12.257] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is tagged by udev as: Keyboard
    12.257] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is a keyboard
    12.258] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event0)
    12.258] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    12.258] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    12.258] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
    12.258] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
    12.258] (**) SynPS/2 Synaptics TouchPad: always reports core events
    12.258] (**) Option "Device" "/dev/input/event0"
    12.258] (**) Option "_source" "server/udev"
    12.259] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event0 is tagged by udev as: Touchpad
    12.259] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event0 is a touchpad
    12.280] (**) Option "Tapping" "On"
    12.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input5/event0"
    12.280] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    12.280] (**) Option "AccelerationScheme" "none"
    12.280] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
    12.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    12.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    12.281] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event0 is tagged by udev as: Touchpad
    12.281] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event0 is a touchpad
    12.281] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    12.281] (II) No input driver specified, ignoring this device.
    12.281] (II) This device may have been added with another device file.
    12.282] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
    12.282] (II) No input driver specified, ignoring this device.
    12.282] (II) This device may have been added with another device file.
    12.283] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    12.283] (II) No input driver specified, ignoring this device.
    12.283] (II) This device may have been added with another device file.
    12.283] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    12.283] (II) No input driver specified, ignoring this device.
    12.283] (II) This device may have been added with another device file.
...
7 
glxinfo | grep render
direct **render**ing: Yes
OpenGL **render**er string: NVS 3100M/PCIe/SSE2
    GL_KTX_buffer_region, GL_NVX_conditional_**render**, GL_NVX_gpu_memory_info,  
    GL_NV_ES1_1_compatibility, GL_NV_blend_square, GL_NV_conditional_**render**,  
    GL_NV_parameter_buffer_object2, GL_NV_path_**render**ing,  
    GL_KTX_buffer_region, GL_NVX_conditional_**render**, GL_NVX_gpu_memory_info,  
    GL_NV_ES1_1_compatibility, GL_NV_blend_square, GL_NV_conditional_**render**,  
    GL_NV_parameter_buffer_object2, GL_NV_path_**render**ing,  
    GL_OES_element_index_uint, GL_OES_fbo_**render**_mipmap,
8 
 4 | LibreOffice                         | LibreOffice                                             | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/LibreOffice:/5.3/openSUSE_Leap_42.2/     |       
 5 | StopMotion                          | StopMotion                                              | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/home:/zhonghuaren/Fedora_24/
13 | http-download.opensuse.org-a62984f3 | LibreOffice:Factory                                     | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/repositories/LibreOffice:/Factory/openSUSE_Leap_42.2/ |

Ein wenig durcheinander?

9

Ja, habe ich auch gerade gesehen. Lag wohl daran, dass Libreoffice 5.3 mal den update-Prozess blockiert hat; habe die factory wieder herausgenommen.

Aber das erklärt nicht die Probleme mit Virtualbox …

10

Virtualbox läuft hier.

Aber was ist aus dem Fedora Repo installiert???

zypper se -sir http://download.opensuse.org/repositories/home:/zhonghuaren/Fedora_24/
11

Muss ich mal nachsehen … Das war irgendein “dirty workaround”, habe vergessen, wofür. :wink:

Virtualbox läuft jetzt auch wieder, ich habe es komplett deinstalliert, neu installiert und die Kernelmodule neu übersetzt.

Jetzt warte ich mal, dass smb4k wieder geht … Und das Verhalten des Grafiktreibers muss ich halt beobachten.

12

qstopmotion - gibt es wohl sonst nicht in opensuse-reps …

13

Dann war wohl nur ein Neucompilieren der Kernel-Module notwendig…
Kann passieren nach einem Kernel-Update.

Es gibt einen Befehl dafür, ohne VirtualBox komplett zu deinstallieren zu müssen:

sudo /sbin/rcvboxdrv setup

(soweit ich weiß; das exakte Kommando könnte sich geändert haben, ich benutze das Oracle VirtualBox Paket nicht…)

Wenn du dkms von Packman installierst, sollte das sogar automatisch passieren. Du musst aber danach VirtualBox neu installieren damit dkms erkannt und “aktiviert” wird.

Oder du benutzt die Standard openSUSE virtualbox Pakete aus den 42.2 Repos… (vorher aber unbedingt VirtualBox deinstallieren) :wink:

Jetzt warte ich mal, dass smb4k wieder geht …

Prinzipiell kannst du natürlich auch die vorherige Version installieren (allerdings mit Sicherheitslücke :wink: ).
Dazu in YaST auf das Paket klicken und dann auf “Versionen”.
Oder:

sudo zypper in -f smb4k-1.2.1-2.43
14

Wie cool! Danke!!! Du hast mir sehr geholfen!

15

Nachtrag zu smb4k:
Die neueste Version 2.0.1 (mit einem gefixten mount helper) ist ab sofort im KDE:Extra Repo verfügbar.

Es wurde ein neuer Security Review beantragt, wenn der (hoffentlich) erfolgreich abgeschlossen ist kann das “vollständige” Paket auch wieder in die Distribution aufgenommen werden.
Ich kann aber noch nicht sagen ob es auch ein Update für 42.2 geben wird (eher nicht, denke ich).

In KDE:Extra wirds aber auf jeden Fall immer die neueste Version geben (so wie bisher), auch für Leap… :wink:

16

Tja, leider wurde der neue Review sofort abgelehnt, mit den Worten “sowas kann niemals sicher sein” (obwohl sie beim letzten Mal andeuteten dass es akzeptiert werden würde sobald die Fixes drin sind).
Ehrlich gesagt komme ich mir jetzt ein wenig ver* vor.

Das bedeutet nun, dass wir wohl nie wieder smb4k mit einer funktionierenden Mount-Funktion in der Distribution haben werden.

In KDE:Extra wirds aber bleiben, hoffe ich.