Results 1 to 2 of 2

Thread: k3b - all flavor - Cannot write leap 42.2 iso to dvd

  1. #1
    Join Date
    Jun 2008
    Location
    South-West France
    Posts
    1,036

    Default k3b - all flavor - Cannot write leap 42.2 iso to dvd

    Hello.
    Cannot write openSUSE-Leap-42.2-DVD to 4.7 Go DVD RW using k3b ( opensuse or Packman )
    Linux box is leap 42.2 and has been updated.
    At start, k3b freeze after message :
    Please reload the medium and press 'ok'
    All checksum are OK.
    If you try to close the apply, you get another message
    ..... Application is not responding. ......
    Then I try with wodim
    Code:
    ASUS-JC-NEW:~> sudo wodim -eject -tao  speed=2 dev=/dev/sr0 -v -data /data4_mk_dvd_pub/ktorrent/iso/openSUSE-Leap-42.2-DVD-x86_64/openSUSE-Leap-42.2-DVD-x86_64.iso
    
    
    TOC Type: 1 = CD-ROM
    scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.11
    SCSI buffer size: 64512
    Device type    : Removable CD-ROM
    Version        : 5
    Response Format: 2
    Capabilities   :
    Vendor_info    : 'MATSHITA'
    Identification : 'BD-CMB UJ160    '
    Revision       : '1.00'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x0040 (BD-ROM)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x001B (DVD+R)
    Profile: 0x001A (DVD+RW)
    Profile: 0x0013 (DVD-RW restricted overwrite) (current)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0010 (DVD-ROM) (current)
    Profile: 0x000A (CD-RW)
    Profile: 0x0009 (CD-R)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
    Driver flags   : SWABAUDIO BURNFREE
    Supported modes: PACKET SAO
    Drive buf size : 1376256 = 1344 KB
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    FIFO size      : 12582912 = 12288 KB
    Track 01: data  4181 MB
    Total size:     4801 MB (475:42.29) = 2140672 sectors
    Lout start:     4801 MB (475:44/22) = 2140672 sectors
    Current Secsize: 2048
    HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
    wodim: WARNING: Could not manage to find medium size, and more than 90 mins of data.
    Speed set to 2770 KB/s
    Starting to write CD/DVD at speed   2.0 in real unknown mode for single session.
    Last chance to quit, starting real write in    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
    CDB:  53 00 00 00 00 00 20 AA 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.005s timeout 40s
    wodim: Cannot open new session.
    Writing  time:    3.371s
    wodim: fifo had 191 puts and 0 gets.
    wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
    ASUS-JC-NEW:~>
    The DVD-RW disk is empty but not new.
    K3b find it empty.
    The DVD-RW has been force formated after the first try which failed.

    Using a brand-new DVD succeed.
    Here the output.
    Code:
    wodim -eject -tao  speed=2 dev=/dev/sr0 -v -data /data4_mk_dvd_pub/ktorrent/iso/openSUSE-Leap-42.2-DVD-x86_64/openSUSE-Leap-42.2-DVD-x86_64.iso
    TOC Type: 1 = CD-ROM
    scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.11
    SCSI buffer size: 64512
    Device type    : Removable CD-ROM
    Version        : 5
    Response Format: 2
    Capabilities   :
    Vendor_info    : 'MATSHITA'
    Identification : 'BD-CMB UJ160    '
    Revision       : '1.00'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0040 (BD-ROM)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x001B (DVD+R)
    Profile: 0x001A (DVD+RW)
    Profile: 0x0013 (DVD-RW restricted overwrite) (current)
    Profile: 0x0014 (DVD-RW sequential recording) (current)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x000A (CD-RW)
    Profile: 0x0009 (CD-R)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
    Driver flags   : SWABAUDIO BURNFREE
    Supported modes: PACKET SAO
    Drive buf size : 1376256 = 1344 KB
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    FIFO size      : 12582912 = 12288 KB
    Track 01: data  4181 MB
    Total size:     4801 MB (475:42.29) = 2140672 sectors
    Lout start:     4801 MB (475:44/22) = 2140672 sectors
    Current Secsize: 2048
    HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
    Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 157824
    Speed set to 2770 KB/s
    Starting to write CD/DVD at speed   2.0 in real unknown mode for single session.
    Last chance to quit, starting real write in    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Starting new track at sector: 0
    Track 01 : xxxx of 4181 MB written ( fifo 100% ) [buf  98%]  2.1x.
    Any comment is welcome.
    Thanks for helping. JCD
    __________
    server leap 15.0 -- ASUS g75vw KDE leap 15.0 -- ASUS g750JZ Optimus KDE leap 15.1 -- acer aspire s13 win 10 home -- HP Omen win 10 home - scan EPSON V500 - Brother HL2250DN - Samsung CLP-325W

  2. #2
    Join Date
    Feb 2010
    Location
    Germany
    Posts
    2,555

    Default Re: k3b - all flavor - Cannot write leap 42.2 iso to dvd

    Is the user doing the burning a member of the "cdrom" group?

    Also, a DVD-RW / DVD+RW may only be reformatted a limited number of times -- AFAIK about 1 000 times.
    Please be aware that the DVD-/+RW medium is much more sensitive to storage temperature limits than the DVD-/+R medium.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •