Results 1 to 8 of 8

Thread: Error while installing Glances: attributeError module object has no attribute...

  1. #1

    Question Error while installing Glances: attributeError module object has no attribute...

    HI all,

    I installed glances (network monitor tool) from https://software.opensuse.org/package/glances but get an error when trying to run it. I get:


    Code:
    Traceback (most recent call last):
                                        File "/usr/bin/glances", line 9, in <module>
                                                                                        load_entry
                                                                                                   "/usr/lib/python2.7/site-packages/glances/glances.py", line 2237, in  main
                                                                                 stats.update()
                                                                                                 F 751, in update
                       self.__update__()
                                          File "/usr/lib/python2.7/site-packages/glances/glances.p
                                                                                                  s:
      AttributeError: 'module' object has no attribute 'error'
    After searching all over I cannot find a fix. I am a new convert from Ubuntu, so that could be a factor .

    Thanks in advance for any help given.

  2. #2
    Join Date
    Nov 2016
    Location
    Prague, CZ
    Posts
    39

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    I was able to replicate your error with packages from two of the repositories on home:napobear and home:randybb. i'm not enough of a python guru to tell what the problem is with python.

    However I do have a workaround!

    Uninstall glances

    Code:
    sudo zypper rm glances
    Install python-pip

    Code:
    sudo zypper install python-pip
    Install Glances with pip. Pip is a package manager built for Python

    Code:
    sudo pip install --force glances
    It should be working now. You might need to zypper install gcc also if you don't have it.

  3. #3
    Join Date
    Nov 2016
    Location
    Prague, CZ
    Posts
    39

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    I tried this again on a new fresh install and I wanted to give the extra dependencies required if my former steps don't work for someone.

    Code:
    sudo zypper install python-pip python3-pip python3-devel gcc

  4. #4
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,587
    Blog Entries
    14

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    Quote Originally Posted by jsevans View Post
    I tried this again on a new fresh install and I wanted to give the extra dependencies required if my former steps don't work for someone.

    Code:
    sudo zypper install python-pip python3-pip python3-devel gcc
    Rather create a bugreport on bugzilla.opensuse.org, so that the dependencies of the package can be fixed to meet the actual requirements
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  5. #5

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    Quote Originally Posted by jsevans View Post
    I was able to replicate your error with packages from two of the repositories on home:napobear and home:randybb. i'm not enough of a python guru to tell what the problem is with python.

    However I do have a workaround!

    Uninstall glances

    Code:
    sudo zypper rm glances
    Install python-pip

    Code:
    sudo zypper install python-pip
    Install Glances with pip. Pip is a package manager built for Python

    Code:
    sudo pip install --force glances
    It should be working now. You might need to zypper install gcc also if you don't have it.
    Ok, so I tried the above and it still did not work. Here is the output:

    Code:
    pip install --force glances     
    Collecting glances
      Using cached Glances-2.7.1.tar.gz
    Collecting psutil>=2.0.0 (from glances)
      Using cached psutil-5.0.0.zip
    Installing collected packages: psutil, glances
      Running setup.py install for psutil ... error                                                                                                              
        Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-1_6koows/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-rlhthwi0-record/install-record.txt --single-version-externally-managed --compile:                                                                                                   
        running install                                                                                                                                          
        running build                                                                                                                                            
        running build_py                                                                                                                                         
        creating build                                                                                                                                           
        creating build/lib.linux-x86_64-3.4                                                                                                                      
        creating build/lib.linux-x86_64-3.4/psutil                                                                                                               
        copying psutil/_common.py -> build/lib.linux-x86_64-3.4/psutil                                                                                           
        copying psutil/_psposix.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/_compat.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/_psosx.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/__init__.py -> build/lib.linux-x86_64-3.4/psutil
        copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.4/psutil
        creating build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/runner.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.4/psutil/tests
        copying psutil/tests/test_memory_leaks.py -> build/lib.linux-x86_64-3.4/psutil/tests
        running build_ext
        building 'psutil._psutil_linux' extension
        creating build/temp.linux-x86_64-3.4
        creating build/temp.linux-x86_64-3.4/psutil
        gcc -pthread -Wno-unused-result -DNDEBUG -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DOPENSSL_LOAD_CONF -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_VERSION=500 -DPSUTIL_LINUX=1 -I/usr/include/python3.4m -c psutil/_psutil_linux.c -o build/temp.linux-x86_64-3.4/psutil/_psutil_linux.o
        psutil/_psutil_linux.c:12:20: fatal error: Python.h: No such file or directory
         #include <Python.h>
                            ^
        compilation terminated.
        error: command 'gcc' failed with exit status 1
        
        ----------------------------------------
    Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-1_6koows/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-rlhthwi0-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-1_6koows/psutil/
    linux-tf2o:~ #
    However, it appears I already have gcc installed:

    Code:
    linux-tf2o:~ # zypper install gcc
    Loading repository data...
    Reading installed packages...
    'gcc' is already installed.
    No update candidate for 'gcc-4.8-9.61.x86_64'. The highest available version is already installed.
    Resolving package dependencies...
    
    Nothing to do.
    So I did:
    Code:
    inux-tf2o:~ #         sudo zypper install python-pip python3-pip python3-devel gcc
    Loading repository data...
    Reading installed packages...
    'gcc' is already installed.
    No update candidate for 'gcc-4.8-9.61.x86_64'. The highest available version is already installed.
    'python3-pip' is already installed.
    No update candidate for 'python3-pip-7.1.2-5.3.noarch'. The highest available version is already installed.
    'python-pip' is already installed.
    No update candidate for 'python-pip-7.1.2-2.4.noarch'. The highest available version is already installed.
    Resolving package dependencies...
    
    The following NEW package is going to be installed:
      python3-devel
    
    1 new package to install.
    Overall download size: 135.1 KiB. Already cached: 0 B. After the operation, additional 495.8 KiB will be used.
    Continue? [y/n/? shows all options] (y): y
    Retrieving package python3-devel-3.4.5-9.1.x86_64                                                                       (1/1), 135.1 KiB (495.8 KiB unpacked)
    Retrieving: python3-devel-3.4.5-9.1.x86_64.rpm ........................................................................................................[done]
    Checking for file conflicts: ..........................................................................................................................[done]
    (1/1) Installing: python3-devel-3.4.5-9.1.x86_64 ......................................................................................................[done]
    and then tried to install again and was successful:

    Code:
    inux-tf2o:~ # pip install --force glances
    Collecting glances
      Using cached Glances-2.7.1.tar.gz
    Collecting psutil>=2.0.0 (from glances)
      Using cached psutil-5.0.0.zip
    Installing collected packages: psutil, glances
      Running setup.py install for psutil ... done
      Running setup.py install for glances ... done
    Successfully installed glances-2.7.1 psutil-5.0.0
    However, after that I tried to run glances again but got another error:

    Code:
    linux-tf2o:~ # glances
    Curses module not found. Glances cannot start in standalone mode.
    So, I read about this error online, then tried to install curses, but only one was already installed and the other two are not found:

    l
    Code:
    inux-tf2o:~ # apt-get install libncurses5 libncurses5-dev libncursesw5                                                                                      
    Loading repository data...                                                                                                                                   
    Reading installed packages...                                                                                                                                
    Package 'libncurses5-devel' not found.                                                                                                                       
    'libncurses5' is already installed.                                                                                                                          
    No update candidate for 'libncurses5-5.9-54.48.x86_64'. The highest available version is already installed.                                                  
    'libncursesw5' not found in package names. Trying capabilities.                                                                                              
    No provider of 'libncursesw5' found.
    Resolving package dependencies...
    
    Nothing to do.
    This is where I am now. Still not able to run glances.

  6. #6
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,319
    Blog Entries
    15

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    Hi
    There is a later version out 2.7, not sure what your doing wrong, probably not using pip3 and python3 tools...

    I've built and packaged it up as an rpm and built with python3 and working fine on openSUSE 42.2;
    https://build.opensuse.org/package/s...ESTING/glances

    Download from here when it's built and published and manually install;
    http://download.opensuse.org/reposit...p_42.2/noarch/

    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  7. #7
    Join Date
    Nov 2016
    Location
    Prague, CZ
    Posts
    39

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    l
    Code:
    inux-tf2o:~ # apt-get install libncurses5 libncurses5-dev libncursesw5                                                                                      
    Loading repository data...                                                                                                                                   
    Reading installed packages...                                                                                                                                
    Package 'libncurses5-devel' not found.                                                                                                                       
    'libncurses5' is already installed.                                                                                                                          
    No update candidate for 'libncurses5-5.9-54.48.x86_64'. The highest available version is already installed.                                                  
    'libncursesw5' not found in package names. Trying capabilities.                                                                                              
    No provider of 'libncursesw5' found.
    Resolving package dependencies...
    
    Nothing to do.
    This is where I am now. Still not able to run glances.
    You're missing python3-curses

    Code:
    zypper install python3-curses
    I found this by doing:

    Code:
    $ zypper search curses
    Loading repository data...
    Reading installed packages...
    
    S | Name                     | Summary                                 | Type
    --+--------------------------+-----------------------------------------+--------
    i | libncurses5              | The New curses Libraries                | package
      | libncurses5-32bit        | The New curses Libraries                | package
    i | libncurses6              | The New curses Libraries                | package
      | libncurses6-32bit        | The New curses Libraries                | package
      | libyui-ncurses-devel     | Libyui-ncurses header files             | package
      | libyui-ncurses-doc       | Libyui-ncurses documentation            | package
      | libyui-ncurses-pkg-devel | Libyui-ncurses-pkg header files         | package
      | libyui-ncurses-pkg-doc   | Libyui-ncurses-pkg documentation        | package
    i | libyui-ncurses-pkg7      | Libyui - yast2 package selector widge-> | package
    i | libyui-ncurses7          | Libyui - Character Based User Interface | package
      | ncurses-devel            | Include Files and Libraries mandatory-> | package
      | ncurses-devel-32bit      | Include Files and Libraries mandatory-> | package
    i | ncurses-utils            | Tools using the new curses libraries    | package
      | ocaml-curses             | OCaml bindings for ncurses              | package
      | ocaml-curses-devel       | Development files for ocaml-curses      | package
      | perl-Curses              | Terminal screen handling and optimiza-> | package
      | perl-CursesWidgets       | CursesWidgets Perl module               | package
      | python-curses            | Python Interface to the (N)Curses Lib-> | package
    i | python3-curses           | Python Interface to the (N)Curses Lib-> | package
    I hope it's working for you now.

  8. #8

    Default Re: Error while installing Glances: attributeError module object has no attribute...

    Quote Originally Posted by jsevans View Post
    You're missing python3-curses

    [

    I hope it's working for you now.
    Yes! Thanks so much for your help. Hopefully this will help someone else with a similar problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •