Results 1 to 3 of 3

Thread: Coupling of Nokia phone

  1. #1
    hstoellinger NNTP User

    Default Coupling of Nokia phone


    I cannot couple my Nokia 6230i. In principle bluetooth (at level 4.19,
    OpenSuse 11.1) seems to work because I get asked to enter a passkey
    after starting xgnokii. However, the passkey-agent program is NOT on my
    system (and it seems it never was after installation!). Is there a hope
    that the bluez-stack will be updated soon - including the passkey-agent?
    Regards H. Stoellinger


    --
    hstoellinger
    ------------------------------------------------------------------------
    hstoellinger's Profile: http://forums.opensuse.org/member.php?userid=14801
    View this thread: http://forums.opensuse.org/showthread.php?t=407416


  2. #2
    Malcolm NNTP User

    Default Re: Coupling of Nokia phone

    Quote Originally Posted by hstoellinger
    I cannot couple my Nokia 6230i. In principle bluetooth (at level 4.19,
    OpenSuse 11.1) seems to work because I get asked to enter a passkey
    after starting xgnokii. However, the passkey-agent program is NOT on my
    system (and it seems it never was after installation!). Is there a hope
    that the bluez-stack will be updated soon - including the passkey-agent?
    Regards H. Stoellinger
    Hi
    What happens if you try the sdptool?
    Code:
    hcitool scan
    (to get the mac address}
    sdptool browse [mac address from above]
    --
    Cheers Malcolm (Linux Counter #276890)
    openSUSE 11.1 x86 Kernel 2.6.27.7-9-default
    up 10:15, 2 users, load average: 0.39, 0.27, 0.30
    GPU GeForce 6600 TE/6200 TE - Driver Version: 180.27


  3. #3
    hstoellinger NNTP User

    Default Re: Coupling of Nokia phone


    Hello, thanks for bothering to post...
    Again, after starting xgnokii, I get asked to enter a passkey at the
    mobile phone. Then that key gets rejected.
    _Entering_gnokii_--config_/etc/gnokiirc_--monitor
    leads_to_the_following_output:_
    The "funny smiley" in the port address actually is "d2".

    GNOKII Version 0.6.26
    LOG: debug mask is 0x1
    Config read from file /etc/gnokiirc.
    phone instance config:
    model = 6510
    port = 00:122:61:F5:90
    connection = bluetooth
    initlength = default
    serial_baudrate = 19200
    serial_write_usleep = -1
    handshake = software
    require_dcd = 0
    smsc_timeout = 10
    rfcomm_channel = 1
    sm_retry = 0
    Connecting
    Serial device: opening device 00:122:61:F5:90
    Can't connect: Connection refused
    Couldn't open PHONET device: Connection refused
    Error in link initialisation: 1
    Telephone interface init failed: Command failed.
    Quitting.
    Cannot unlock device.
    Command failed.


    _Your_suggested_commands_lead_to_the_following_output:_
    sdptool browse 00:122:61:F5:90
    Browsing 00:122:61:F5:90 ...

    Service Name: Dial-up networking

    Service RecHandle: 0x10000

    Service Class ID List:

    "Dialup Networking" (0x1103)

    "Generic Networking" (0x1201)

    Protocol Descriptor List:

    "L2CAP" (0x0100)

    "RFCOMM" (0x0003)

    Channel: 1

    Language Base Attr List:

    code_ISO639: 0x656e

    encoding: 0x6a

    base_offset: 0x100

    Profile Descriptor List:

    "Dialup Networking" (0x1103)

    Version: 0x0100


    Service Name: Nokia PC Suite
    Service RecHandle: 0x10001
    Service Class ID List:
    "Serial Port" (0x1101)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 15
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100

    Service Name: COM 1
    Service RecHandle: 0x10002
    Service Class ID List:
    "Serial Port" (0x1101)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 3
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100

    Service Name: Voice Gateway
    Service RecHandle: 0x10003
    Service Class ID List:
    "Handsfree Audio Gateway" (0x111f)
    "Generic Audio" (0x1203)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 13
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100
    Profile Descriptor List:
    "Handsfree" (0x111e)
    Version: 0x0101

    Service Name: Audio Gateway
    Service RecHandle: 0x10004
    Service Class ID List:
    "Headset Audio Gateway" (0x1112)
    "Generic Audio" (0x1203)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 12
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100
    Profile Descriptor List:
    "Headset" (0x1108)
    Version: 0x0100

    Service Name: SIM ACCESS
    Service RecHandle: 0x10009
    Service Class ID List:
    "SIM Access" (0x112d)
    "Generic Telephony" (0x1204)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 4
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100
    Profile Descriptor List:
    "SIM Access" (0x112d)
    Version: 0x0100

    Service Name: OBEX Object Push
    Service RecHandle: 0x1000b
    Service Class ID List:
    "OBEX Object Push" (0x1105)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 9
    "OBEX" (0x0008)
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100
    Profile Descriptor List:
    "OBEX Object Push" (0x1105)
    Version: 0x0100

    Service Name: OBEX File Transfer
    Service RecHandle: 0x1000c
    Service Class ID List:
    "OBEX File Transfer" (0x1106)
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 10
    "OBEX" (0x0008)
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100
    Profile Descriptor List:
    "OBEX File Transfer" (0x1106)
    Version: 0x0100

    Service Name: SyncML Client
    Service RecHandle: 0x1000e
    Service Class ID List:
    UUID 128: 00000002-0000-1000-8000-0002ee000002
    Protocol Descriptor List:
    "L2CAP" (0x0100)
    "RFCOMM" (0x0003)
    Channel: 11
    "OBEX" (0x0008)
    Language Base Attr List:
    code_ISO639: 0x656e
    encoding: 0x6a
    base_offset: 0x100


    --
    hstoellinger
    ------------------------------------------------------------------------
    hstoellinger's Profile: http://forums.opensuse.org/member.php?userid=14801
    View this thread: http://forums.opensuse.org/showthread.php?t=407416


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •