Results 1 to 3 of 3

Thread: Amanda issues

  1. #1
    upbeat NNTP User

    Default Amanda issues


    There seems to be an issue with Amanda as built for 11.1.

    I upgraded from 10.1 and found that the tape device files - /dev/nst* -
    defaulted to root:root ownership and therefore could not be written by
    the amanda user. I could resolve this by adding into
    /etc/permissions.local the lines

    /dev/nst0 root:disk 660
    /dev/nst0a root:disk 660
    /dev/nst0l root:disk 660
    /dev/nst0m root:disk 660

    That resolved that issue and amcheck runs fine with my existing
    amanda.conf

    Unfortunately amlabel is still unable to label or read the tape label
    correctly - an HP DAT160 fwiw. I just get the following:

    amanda@upbeat:/etc/amanda/mydump> amlabel mydump MYDUMP-03
    rewinding, reading label, not an amanda tape (Device or resource busy)
    rewinding, writing label MYDUMP-03, checking label
    amlabel: not an amanda tape (Device or resource busy)

    From what I can see on the amanda lists, this is potentially an issue
    with the block size at compile time. I've been too busy to follow this
    through and try a new compile but I'm pretty hacked off. These problems
    did not exist in 10.1


    --
    upbeat
    ------------------------------------------------------------------------
    upbeat's Profile: http://forums.opensuse.org/member.php?userid=21699
    View this thread: http://forums.opensuse.org/showthread.php?t=407361


  2. #2
    upbeat NNTP User

    Default Re: Amanda issues


    Now submitted in bugzilla


    --
    upbeat
    ------------------------------------------------------------------------
    upbeat's Profile: http://forums.opensuse.org/member.php?userid=21699
    View this thread: http://forums.opensuse.org/showthread.php?t=407361


  3. #3
    upbeat NNTP User

    Default Re: Amanda issues


    Tried on an Ubuntu 8.04 LTS aerver and the problem persisted.

    However...I think I've been able to resolve the issue by adding the
    lines

    BlockSize 32kb
    ReadBlockSize 32kb

    to the tapetype definition after picking up a vital clue on the Gentoo
    bugzilla ('Gentoo Bug 234062 - app-backup/amanda-2.5.2_p1-r4 \"Device or
    resource busy\"' (http://bugs.gentoo.org/234062)).

    Definitely seems to be an issue in the move from amanda 2.5.1 to 2.5.2
    (and later?) that is underdocumented and the solution is not apparent
    from the standard tapetype examples or the output from amtapetype.

    Again, this has only been tested with an external USB HP DAT160 on
    ix86.


    --
    upbeat
    ------------------------------------------------------------------------
    upbeat's Profile: http://forums.opensuse.org/member.php?userid=21699
    View this thread: http://forums.opensuse.org/showthread.php?t=407361


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •