opensuse 11.1 on laptops + hard lock

[slacker9]

dear all,
i have been using opensuse for a long time, and in my laptop opensuse
11.0 was worked fine, then i updated to 11.1 and it started showing
strange behavior.
(my laptop is acer ASPIRE 5052 NWXMI)

here are the problems i face

1.Most of the time there will be a *hard lock*, and i had to force off,
by pressing the power button.
2.sound become very low.

fooling around with the first problem, by disabling some wireless
modules, some how i managed to get the machine up

i found that whenever i start X window, it makes a hard lock.
so every time i had to push the powerbutton for 20 sec to switch of and
reboot again.

did anyone experienced a same kind of problems??
funny thing is i installed suse11.1 to a new sony vaio laptop,
(vaio VGNCS115J) as soon as installed cheese, it locked the X, for some
time i could move the mouse. keyboard dead.
and sound very low
so i disabled wireless and webcam modules and graphics is up

DID ANYONE HAD THE SAME PROBLEM?
*will installing the security update solve the problem?*

if needed, i can upload my lsmod, lspci and dmesg outputs.

my next aim wil be to compile a custom kernel and if doesnt work i had
to stick with slackware.

please !! any help is appreciated
regards


--
slacker9
------------------------------------------------------------------------
slacker9's Profile: http://forums.opensuse.org/member.php?userid=21765
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[oldcpu]

I have openSUSE-11.1 running fine on my Dell Studio 15 laptop. No hard
lockups.

Could it be that you have a problem (in both cases) with your graphic
driver, causing X not to come up properly? Do you get the hard lock
with safe settings (fail safe) ?


--
oldcpu
------------------------------------------------------------------------
oldcpu's Profile: http://forums.opensuse.org/member.php?userid=77
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[slacker9]

thank you,
oldcpu, that you responded to the thread.
i dont feel like going to 11.0 again, so please help me out.

Even 10.3 and 11.0 worked well on this laptop.
i installed 11.0 on a dell machine, and everything worked, even the web
cam.

safe setting also caused hardlock in the vaio laptop, which is having
an intel graphix

my acer laptop has an ati graphics, here is the lspci

Code:
--------------------

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]
08:01.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
08:01.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
08:01.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
08:01.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
08:01.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
08:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)


--------------------

lsmod output

Code:
--------------------

Module Size Used by
nls_iso8859_1 3768 1
nls_cp437 5432 1
vfat 9764 1
fat 46376 1 vfat
usb_storage 86716 1
binfmt_misc 7872 1
snd_pcm_oss 43300 0
snd_mixer_oss 14288 1 snd_pcm_oss
snd_seq 52248 0
snd_seq_device 7168 1 snd_seq
ipv6 242608 18
cpufreq_conservative 6360 0
cpufreq_userspace 3112 0
cpufreq_powersave 1640 0
powernow_k8 13776 1
fuse 52488 1
loop 15028 0
dm_mod 62236 0
pcmcia 32884 0
snd_hda_intel 413232 0
sdhci_pci 7452 0
yenta_socket 22884 1
8139too 23020 0
snd_pcm 79096 2 snd_pcm_oss,snd_hda_intel
sdhci 17436 1 sdhci_pci
fglrx 1954300 0
8139cp 19152 0
rtc_cmos 11488 0
snd_timer 21132 2 snd_seq,snd_pcm
i2c_piix4 10148 0
rsrc_nonstatic 10936 1 yenta_socket
sr_mod 13536 0
mii 4968 2 8139too,8139cp
mmc_core 55088 1 sdhci
pcspkr 2344 0
button 6560 0
battery 11156 0
rtc_core 18048 1 rtc_cmos
ati_agp 6652 0
k8temp 4156 0
cdrom 32288 1 sr_mod
snd_page_alloc 8184 2 snd_hda_intel,snd_pcm
wmi 6720 0
ac 4452 0
pcmcia_core 33208 3 pcmcia,yenta_socket,rsrc_nonstatic
serio_raw 5092 0
i2c_core 29972 1 i2c_piix4
snd_hwdep 7144 1 snd_hda_intel
rtc_lib 2816 1 rtc_core
shpchp 28280 0
agpgart 32564 2 fglrx,ati_agp
pci_hotplug 27392 1 shpchp
snd 57408 8 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
sg 29376 0
soundcore 6900 1 snd
usbhid 45908 0
hid 35784 1 usbhid
ff_memless 7244 1 usbhid
ehci_hcd 48260 0
ohci_hcd 31800 0
sd_mod 31424 5
crc_t10dif 1704 1 sd_mod
usbcore 167604 5 usb_storage,usbhid,ehci_hcd,ohci_hcd
edd 8616 0
reiserfs 221528 1
fan 4712 0
ide_pci_generic 3428 0
atiixp 3384 0
ide_core 99412 2 ide_pci_generic,atiixp
ata_generic 4484 0
thermal 19916 0
processor 44060 2 powernow_k8,thermal
thermal_sys 11364 3 fan,thermal,processor
hwmon 3092 2 k8temp,thermal_sys
pata_atiixp 4560 0
sata_sil 7808 2
libata 161148 3 ata_generic,pata_atiixp,sata_sil
scsi_mod 149804 5 usb_storage,sr_mod,sg,sd_mod,libata
dock 11988 1 libata

--------------------


regards


--
slacker9
------------------------------------------------------------------------
slacker9's Profile: http://forums.opensuse.org/member.php?userid=21765
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[slacker9]

dmesg output

Code:
--------------------

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003be90000 (usable)
BIOS-e820: 000000003be90000 - 000000003be9c000 (ACPI data)
BIOS-e820: 000000003be9c000 - 000000003bf00000 (ACPI NVS)
BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3be90 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 7000-c000
NX (Execute Disable) protection: active
RAMDISK: 37a80000 - 37fef13c
ACPI: RSDP 000F8A20, 0014 (r0 PTLTD )
ACPI: RSDT 3BE94E78, 003C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
ACPI: FACP 3BE9BBDC, 0074 (r1 ATI Bowfin 6040000 ATI F4240)
ACPI: DSDT 3BE94EB4, 6D28 (r1 ATI SB460 6040000 MSFT 2000002)
ACPI: FACS 3BE9CFC0, 0040
ACPI: SSDT 3BE9BC50, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3BE9BDD2, 0054 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 3BE9BE26, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: BOOT 3BE9BE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC 3BE9BE8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
ACPI: DMI detected: Acer
ACPI: Local APIC address 0xfee00000
NUMA - single node, flat memory mode
Node: 0, start_pfn: 0, end_pfn: 3be90
Setting physnode_map array to node 0 for pfns:
0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000
node 0 pfn: [0 - 3be90]
Reserving 2560 pages of KVA for lmem_map of node 0 at 3b400
remove_active_range (0, 242688, 245248)
Reserving total of a00 pages for numa KVA remap
kva_start_pfn ~ 37000 max_low_pfn ~ 38000
max_pfn = 3be90
62MB HIGHMEM available.
896MB LOWMEM available.
max_low_pfn = 38000, highstart_pfn = 38000
Low memory ends at vaddr f8000000
node 0 will remap to vaddr f7000000 - f7a00000
allocate_pgdat: node 0 NODE_DATA f7000000
remap_numa_kva: node 0
remap_numa_kva: f7000000 to pfn 0003b400
remap_numa_kva: f7200000 to pfn 0003b600
remap_numa_kva: f7400000 to pfn 0003b800
remap_numa_kva: f7600000 to pfn 0003ba00
remap_numa_kva: f7800000 to pfn 0003bc00
High memory starts at vaddr f8000000
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 0000b000 - 00012000
(11 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000066c45c] TEXT DATA BSS ==> [0000100000 - 000066c45c]
#4 [0037a80000 - 0037fef13c] RAMDISK ==> [0037a80000 - 0037fef13c]
#5 [000066d000 - 0000675000] INIT_PG_TABLE ==> [000066d000 - 0000675000]
#6 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
#7 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000]
#8 [003b400000 - 003be00000] KVA RAM
#9 [0037000000 - 0037a00000] KVA PG ==> [0037000000 - 0037a00000]
#10 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000]
found SMP MP-table at [c00f8a50] 000f8a50
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003be90
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x0003b400
0: 0x0003be00 -> 0x0003be90
On node 0 totalpages: 242733
free_area_init_node: node 0, pgdat f7000000, node_mem_map f7002000
DMA zone: 3961 pages, LIFO batch:0
Normal zone: 223300 pages, LIFO batch:31
HighMem zone: 13315 pages, LIFO batch:3
Using APIC driver default
SB4X0 revision 0x83
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 39708 bytes of per cpu data
NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 8
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240576
Policy zone: HighMem
Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HTS541612J9SA00_SB2D04E4GXWMSE-part7 vga=0x317
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1599.956 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00038000:0003be90)
Memory: 948604k/981568k available (2396k kernel code, 22324k reserved, 1959k data, 328k init, 53824k highmem)
virtual kernel memory layout:
fixmap : 0xff8b6000 - 0xfffff000 (7460 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0548000 - 0xc059a000 ( 328 kB)
.data : 0xc03571ab - 0xc0540f88 (1959 kB)
.text : 0xc0100000 - 0xc03571ab (2396 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.91 BogoMIPS (lpj=6399824)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 905 Objects with 58 Devices 202 Methods 29 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Mapping cpu 0 to node 0
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Mapping cpu 1 to node 0
Calibrating delay using timer specific routine.. 3200.18 BogoMIPS (lpj=6400379)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
System has AMD C1E enabled
Brought up 2 CPUs
Switch to broadcast mode on CPU0
Total of 2 processors activated (6400.10 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
Switch to broadcast mode on CPU1
net_namespace: 1044 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.........................................................................................................................................
Initialized 24/29 Regions 47/47 Fields 34/35 Buffers 32/33 Packages (922 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 0 _STA executions (examined 63 objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 2 Runtime GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:00:12.0 reg 10 io port: [8440, 8447]
PCI: 0000:00:12.0 reg 14 io port: [8434, 8437]
PCI: 0000:00:12.0 reg 18 io port: [8438, 843f]
PCI: 0000:00:12.0 reg 1c io port: [8430, 8433]
PCI: 0000:00:12.0 reg 20 io port: [8400, 840f]
PCI: 0000:00:12.0 reg 24 32bit mmio: [d0004000, d00041ff]
PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 7ffff]
pci 0000:00:12.0: supports D1
pci 0000:00:12.0: supports D2
PCI: 0000:00:13.0 reg 10 32bit mmio: [d0005000, d0005fff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [d0006000, d0006fff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [d0007000, d0007fff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [8410, 841f]
PCI: 0000:00:14.0 reg 14 32bit mmio: [fed00000, fed003ff]
HPET not enabled in BIOS. You might try hpet=force boot option
PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:14.1 reg 18 io port: [0, 7]
PCI: 0000:00:14.1 reg 1c io port: [0, 3]
PCI: 0000:00:14.1 reg 20 io port: [8420, 842f]
PCI: 0000:00:14.2 reg 10 64bit mmio: [d0000000, d0003fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:05.0 reg 10 32bit mmio: [d4000000, d7ffffff]
PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [d0100000, d010ffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
PCI: bridge 0000:00:01.0 32bit mmio: [d0100000, d01fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d4000000, d7ffffff]
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: bridge 0000:00:05.0 io port: [0, fff]
PCI: bridge 0000:00:05.0 32bit mmio: [0, fffff]
PCI: bridge 0000:00:06.0 io port: [0, fff]
PCI: bridge 0000:00:06.0 32bit mmio: [0, fffff]
PCI: bridge 0000:00:07.0 io port: [0, fff]
PCI: bridge 0000:00:07.0 32bit mmio: [0, fffff]
PCI: 0000:08:01.0 reg 10 32bit mmio: [d0210000, d0210fff]
pci 0000:08:01.0: supports D1
pci 0000:08:01.0: supports D2
pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:01.0: PME# disabled
PCI: 0000:08:01.1 reg 10 32bit mmio: [d0211000, d021107f]
pci 0000:08:01.1: supports D1
pci 0000:08:01.1: supports D2
pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot
pci 0000:08:01.1: PME# disabled
PCI: 0000:08:01.2 reg 10 32bit mmio: [d0211400, d02114ff]
pci 0000:08:01.2: supports D1
pci 0000:08:01.2: supports D2
pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot
pci 0000:08:01.2: PME# disabled
PCI: 0000:08:01.3 reg 10 32bit mmio: [d0211800, d021187f]
pci 0000:08:01.3: supports D1
pci 0000:08:01.3: supports D2
pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot
pci 0000:08:01.3: PME# disabled
PCI: 0000:08:01.4 reg 10 32bit mmio: [0, ff]
pci 0000:08:01.4: supports D1
pci 0000:08:01.4: supports D2
pci 0000:08:01.4: PME# supported from D0 D1 D2 D3hot
pci 0000:08:01.4: PME# disabled
PCI: 0000:08:02.0 reg 10 io port: [a000, a0ff]
PCI: 0000:08:02.0 reg 14 32bit mmio: [d0211c00, d0211cff]
pci 0000:08:02.0: supports D1
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
PCI: 0000:08:04.0 reg 10 32bit mmio: [d0200000, d020ffff]
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [a000, afff]
PCI: bridge 0000:00:14.4 32bit mmio: [d0200000, d02fffff]


--------------------


--
slacker9
------------------------------------------------------------------------
slacker9's Profile: http://forums.opensuse.org/member.php?userid=21765
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[slacker9]

Code:
--------------------
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling


pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:07.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:07.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
pnp: PnP ACPI: found 10 devices

--------------------


--
slacker9
------------------------------------------------------------------------
slacker9's Profile: http://forums.opensuse.org/member.php?userid=21765
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[slacker9]

sometimes, when i pressed the power button, it got hard lock. i think
there is a problem with acpi too


--
slacker9
------------------------------------------------------------------------
slacker9's Profile: http://forums.opensuse.org/member.php?userid=21765
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[oldcpu]

I am just a regular user, and by no means am I knowledgeable in this
area.

But what might help the knowledgeable users, is for each of your
laptops with this problem, for you to list:
a. laptop model/manuf # (which you have)
b. graphics (which you have not) (ie manufact/model#)
c. what graphic driver you are using (vesa? openGL ? proprietary? and
if proprietary, then what version ? )
d. anything non-stock that you may have done to xorg ...
e. which desktop you are using, and anything non-stock that you may
have done to your desktop (such as updating kde-4.1.3 to 4.x or
something like that).


--
oldcpu
------------------------------------------------------------------------
oldcpu's Profile: http://forums.opensuse.org/member.php?userid=77
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[adityag]

hi,
while installing opensuse 11.1(openSUSE-11.1-DVD-x86_64.iso),only the
welcome screen comes and then the system hangs.....
i pressed Ctrl+Alt+F2 ....the cursor stop after the line....
starting udev... udevd-event[71]: "sbin/modprobe" abnormal exit
.....

i tried to reinstall it ,but this time i changed the kernel option from
DEFAULT to NO ACPI...
everything was working fine ....,i aborted the installation to find out
the consequences of installing opensuse 11.1 with NO ACPI....

if possible can u tell me my present problems with MODPROBE
,ACPI.....and how could i solve them....

My system configuration....
ASPIRE 5052nmxmi
AMD TURION 64X2 MOBILE TECHNOLOGY
ATI RADEON Xpress 1100
1GB RAM

THANKS IN ADVANCE......


--
adityag
------------------------------------------------------------------------
adityag's Profile: http://forums.opensuse.org/member.php?userid=22042
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[adityag]

plz help me slove this problem....


--
adityag
------------------------------------------------------------------------
adityag's Profile: http://forums.opensuse.org/member.php?userid=22042
View this thread: http://forums.opensuse.org/showthread.php?t=407002

[slacker9]

thank you all
finally i figured out the problem.
when i tried a new account it worked

first i checked with root account and then i found that it wasnt
hardlocking. so i created a new account and there is no more hard lock.

probably some configuration file in home dir might have caused the
problem. or some temporary files in /tmp corresponding to the user might
have caused the problem.

now i am happy


--
slacker9
------------------------------------------------------------------------
slacker9's Profile: http://forums.opensuse.org/member.php?userid=21765
View this thread: http://forums.opensuse.org/showthread.php?t=407002