Results 1 to 4 of 4

Thread: hplip-2.8.12 error on make

  1. #1
    pink-banana-fish NNTP User

    Default hplip-2.8.12 error on make


    I have a problem with hplips(version in title), it fails on the 'make'
    part:
    > hplip-2.8.12.run
    > Creating directory hplip-2.8.12
    > Verifying archive integrity... All good.
    > Uncompressing HPLIP 2.8.12 Self Extracting
    > Archive.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    >
    >
    > HP Linux Imaging and Printing System (ver. 2.8.12)
    > HPLIP Installer ver. 5.0
    >
    > Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
    > This software comes with ABSOLUTELY NO WARRANTY.
    > This is free software, and you are welcome to distribute it
    > under certain conditions. See COPYING file for more details.
    >
    > Installer log saved in: hplip-install_Wed-14-Jan-2009_16:06:55.log
    >
    > /home/rory/hplip-2.8.12/installer/core_install.py:32:
    > DeprecationWarning: the sha module is deprecated; use the hashlib module
    > instead
    >
    > import sha # TODO: Replace with hashlib (sha is deprecated in Python
    > 3.0)
    > \
    > note: Defaults for each question are maked with a '*'. Press <enter> to
    > accept the default.
    >
    >
    > INSTALLATION MODE
    > -----------------
    > Automatic mode will install the full HPLIP solution with the most
    > common options.
    > Custom mode allows you to chose installation options to fit specific
    > requirements.
    >
    > Please choose the installation mode (a=automatic*, c=custom, q=quit) :
    > c
    >
    > Initializing. Please wait...
    > warning: Invalid ppd_dir value: None
    >
    >
    > INSTALL TYPE
    > ------------
    > For most users, it is recommended to install HPLIP with full support
    > (scanning, faxing, toolbox, etc).
    > For servers or minimal installations, you can also install print
    > support only (HPIJS only).
    >
    > Install full hplip support (recommended) or print-only support (f=full
    > hplip support*, p=printing only support, q=quit) ?f
    >
    >
    > INTRODUCTION
    > ------------
    > This installer will install HPLIP version 2.8.12 on your computer.
    > Please close any running package management systems now (YaST, Adept,
    > Synaptic, Up2date, etc).
    >
    >
    > DISTRO/OS CONFIRMATION
    > ----------------------
    > Distro appears to be SUSE Linux 11.1.
    >
    > Is "SUSE Linux 11.1" your correct distro/OS and version (y=yes*, n=no,
    > q=quit) ? y
    >
    >
    > SELECT HPLIP OPTIONS
    > --------------------
    > You can select which HPLIP options to enable. Some options require
    > extra dependencies.
    >
    > Do you wish to enable 'Network/JetDirect I/O' (y=yes*, n=no, q=quit) ?
    > y
    > Do you wish to enable 'Graphical User Interfaces (GUIs)' (y=yes*, n=no,
    > q=quit) ? y
    > Do you wish to enable 'PC Send Fax support' (y=yes*, n=no, q=quit) ? y
    >
    > Do you wish to enable 'Scanning support' (y=yes*, n=no, q=quit) ? y
    >
    > Do you wish to enable 'Parallel I/O (LPT)' (y=yes*, n=no, q=quit) ? y
    >
    > Do you wish to enable 'HPLIP documentation (HTML)' (y=yes*, n=no,
    > q=quit) ? y
    >
    >
    > ENTER ROOT/SUPERUSER PASSWORD
    > -----------------------------
    > Please enter the root/superuser password:
    > Password accepted
    >
    >
    > RUNNING PRE-INSTALL COMMANDS
    > ----------------------------
    >
    >
    > INSTALL MISSING OPTIONAL DEPENDENCIES
    > -------------------------------------
    > warning: There are 1 missing OPTIONAL dependencies.
    > note: Installation of dependencies requires an active internet
    > connection.
    > warning: Missing REQUIRED dependency for option 'parallel': ppdev
    > (ppdev - Parallel port support kernel module.)
    > warning: This installer cannot install 'ppdev' for your distro/OS
    > and/or version.
    > warning: Option 'parallel' has been turned off.
    >
    >
    > READY TO BUILD AND INSTALL
    > --------------------------
    > Ready to perform build and install. Press <enter> to continue or 'q' to
    > quit:
    >
    >
    > PRE-BUILD COMMANDS
    > ------------------
    >
    >
    > BUILD AND INSTALL
    > -----------------
    > Running './configure --prefix=/usr --disable-qt4
    > --enable-foomatic-ppd-install --enable-doc-build --enable-qt3
    > --enable-gui-build --disable-foomatic-drv-install --disable-pp-build
    > --enable-network-build --enable-dbus-build --disable-hpijs-only-build
    > --enable-scan-build --enable-fax-build'
    > Please wait, this may take several minutes...
    > Command completed successfully.
    >
    > Running 'make clean'
    > Please wait, this may take several minutes...
    > Command completed successfully.
    >
    > Running 'make'
    > Please wait, this may take several minutes...
    > error: 'make' command failed with status code 2


    It has an error as you can see. This does not happen straight away, it
    runs make for about 30 seconds showing a twisting bar(|,/,- and \) I
    have googled about this and i have seen that it can work when running it
    from the /home directory. This didn't help.
    I am running openSUSE 11.1 KDE4, i had hplip installed and working
    perfectly on my previous version (11.0). I have make installed.

    Thanks for any help


    --
    pink-banana-fish
    ------------------------------------------------------------------------
    pink-banana-fish's Profile: http://forums.opensuse.org/member.php?userid=19713
    View this thread: http://forums.opensuse.org/showthread.php?t=404977


  2. #2
    cybertaz NNTP User

    Default Re: hplip-2.8.12 error on make


    When it asks for the parallel port support say no. Or you can install
    ppdev packages.

    Also check to see if you have the Kernel-sources installed. Along with
    gcc

    I would also find out why this:


    Code:
    --------------------
    /home/rory/hplip-2.8.12/installer/core_install.py:32: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
    import sha # TODO: Replace with hashlib (sha is deprecated in Python 3.0)
    --------------------

    Shows up.
    Did you check the logs? there is bound to be more information about the
    error 2 in there.

    Code:
    --------------------
    Installer log saved in: hplip-install_Wed-14-Jan-2009_16:06:55.log
    --------------------


    --
    '' (http://userbars.org)AMD64-X2 4200+, NVIDIA 8500GTx2 (twinview mode),
    2 GB Ram
    ------------------------------------------------------------------------
    cybertaz's Profile: http://forums.opensuse.org/member.php?userid=123
    View this thread: http://forums.opensuse.org/showthread.php?t=404977


  3. #3
    pink-banana-fish NNTP User

    Default Re: hplip-2.8.12 error on make


    > hplip-install[25406]: info: :[01mINSTALL MISSING REQUIRED
    > DEPENDENCIES[0m
    > hplip-install[25406]: info:
    > :[01m-------------------------------------[0m
    > warning: There are 7 missing REQUIRED dependencies.
    > note: Installation of dependencies requires an active internet
    > connection.
    > warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++
    > Compiler)
    > warning: This installer cannot install 'gcc' for your distro/OS and/or
    > version.
    > error: Installation cannot continue without this dependency. Please
    > manually install this dependency and re-run this installer.
    >


    thats at the end of the log. But i have gcc installed.
    help!
    thanks


    --
    pink-banana-fish
    ------------------------------------------------------------------------
    pink-banana-fish's Profile: http://forums.opensuse.org/member.php?userid=19713
    View this thread: http://forums.opensuse.org/showthread.php?t=404977


  4. #4
    pink-banana-fish NNTP User

    Default Re: hplip-2.8.12 error on make


    Aha, I fixed it;
    i searched gcc and installed everything that had c++ and fortran in the
    name. i then ran it and it needed a library libg something. i ran it
    again and it successfully worked.
    thanks


    --
    pink-banana-fish
    ------------------------------------------------------------------------
    pink-banana-fish's Profile: http://forums.opensuse.org/member.php?userid=19713
    View this thread: http://forums.opensuse.org/showthread.php?t=404977


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •