Results 1 to 6 of 6

Thread: HPLIP failed with status code 2

  1. #1
    magicnosegoblin NNTP User

    Default HPLIP failed with status code 2


    A quick search did not reveal anything helpful, forgive me if this has
    already been covered and I missed it. I'm new to openSUSE (and LINUX)
    and I'm using 11.1 with KDE. I'm trying to install the HPLIP and the
    'make' command fails with status code 2. I've installed all of the
    dependencies except cups-ddk. This is not installed because I cannot
    locate it. cupsddk (without the hyphen) CUPS Driver Development Kit
    1.2.3-65.105 is installed. Any assistance is appreciated. The full
    affair follows:

    magicnosegoblin@linux-y35i:~> cd Desktop
    magicnosegoblin@linux-y35i:~/Desktop> sh hplip-2.8.12.run
    Creating directory hplip-2.8.12
    Verifying archive integrity... All good.
    Uncompressing HPLIP 2.8.12 Self Extracting
    Archive.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................



    HP Linux Imaging and Printing System (ver. 2.8.12)
    HPLIP Installer ver. 5.0

    Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.

    Installer log saved in: hplip-install_Tue-23-Dec-2008_17:16:07.log

    /home/magicnosegoblin/Desktop/hplip-2.8.12/installer/core_install.py:32:
    DeprecationWarning: the sha module is deprecated; use the hashlib module
    instead

    import sha # TODO: Replace with hashlib (sha is deprecated in Python
    3.0)
    \
    note: Defaults for each question are maked with a '*'. Press <enter> to
    accept the default.


    INSTALLATION MODE
    -----------------
    Automatic mode will install the full HPLIP solution with the most
    common options.
    Custom mode allows you to chose installation options to fit specific
    requirements.

    Please choose the installation mode (a=automatic*, c=custom, q=quit) :
    a

    Initializing. Please wait...
    warning: Invalid ppd_dir value: None


    INTRODUCTION
    ------------
    This installer will install HPLIP version 2.8.12 on your computer.
    Please close any running package management systems now (YaST, Adept,
    Synaptic, Up2date, etc).


    DISTRO/OS CONFIRMATION
    ----------------------
    Distro appears to be SUSE Linux 11.1.

    Is "SUSE Linux 11.1" your correct distro/OS and version (y=yes*, n=no,
    q=quit) ? y


    SELECT HPLIP OPTIONS
    --------------------
    Would you like to enable support for parallel (LPT connected
    printers? (y=yes, n=no*, q=quit) ? n


    ENTER ROOT/SUPERUSER PASSWORD
    -----------------------------
    Please enter the root/superuser password:
    Password accepted


    RUNNING PRE-INSTALL COMMANDS
    ----------------------------


    INSTALL MISSING OPTIONAL DEPENDENCIES
    -------------------------------------
    warning: There are 1 missing OPTIONAL dependencies.
    note: Installation of dependencies requires an active internet
    connection.
    warning: Missing OPTIONAL dependency for option 'base': cups-ddk
    (cups-ddk - CUPS driver development kit) warning: This installer cannot
    install 'cups-ddk' for your distro/OS and/or version.

    ****NOTE: cupsddk CUPS Driver Development Kit 1.2.3-65.105 IS
    INSTALLED. I cannot locate cups-ddk (with the hyphen)****

    PRE-BUILD COMMANDS
    ------------------


    BUILD AND INSTALL
    -----------------
    Running './configure --libdir=/usr/lib64 --prefix=/usr --disable-qt4
    --enable-foomatic-ppd-install --enable-doc-build --enable-qt3
    --enable-gui-build --disable-foomatic-drv-install --disable-pp-build
    --enable-network-build --enable-dbus-build --disable-hpijs-only-build
    --enable-scan-build --enable-fax-build'
    Please wait, this may take several minutes...
    Command completed successfully.

    Running 'make clean'
    Please wait, this may take several minutes...
    Command completed successfully.

    Running 'make'
    Please wait, this may take several minutes...
    error: 'make' command failed with status code 2
    magicnosegoblin@linux-y35i:~/Desktop>


    --
    magicnosegoblin
    ------------------------------------------------------------------------
    magicnosegoblin's Profile: http://forums.opensuse.org/member.php?userid=18107
    View this thread: http://forums.opensuse.org/showthread.php?t=402870


  2. #2
    maldmm5 NNTP User

    Default Re: HPLIP failed with status code 2


    Hi there,

    Before doing the installation do as the root:
    yast --install libgphoto2-devel

    and then kickoff the installation and see how it goes...I had the same
    prob and it solved the problem...pls post back what your results are.

    Cheers
    Ali


    --
    maldmm5
    ------------------------------------------------------------------------
    maldmm5's Profile: http://forums.opensuse.org/member.php?userid=9881
    View this thread: http://forums.opensuse.org/showthread.php?t=402870


  3. #3
    magicnosegoblin NNTP User

    Default Re: HPLIP failed with status code 2


    Thanks for the reply. I'm actually having trouble setting up my printer
    (HP Laserjet 1018). The library you propose is for previewing,
    retrieving, and capturing images from a range of supported digital
    cameras to your hard drive. I don't own an digital camera. I'm not
    sure this library would be helpful.


    --
    magicnosegoblin
    ------------------------------------------------------------------------
    magicnosegoblin's Profile: http://forums.opensuse.org/member.php?userid=18107
    View this thread: http://forums.opensuse.org/showthread.php?t=402870


  4. #4
    dr1445 NNTP User

    Default Re: HPLIP failed with status code 2


    i had the same problem, downloaded and installed hplip-1.7.4a.run which
    works ok to run my hp printer. as suggested maybe 2.8 is in need of of
    the libphoto file to load correctly.


    --
    dr1445
    ------------------------------------------------------------------------
    dr1445's Profile: http://forums.opensuse.org/member.php?userid=1133
    View this thread: http://forums.opensuse.org/showthread.php?t=402870


  5. #5
    cizetta NNTP User

    Default Re: HPLIP failed with status code 2


    I had the same problem, but after installing libgphoto2-devel everything
    is fine with hplip-2.8. That's on OpenSUSE 11.1.
    Thanks maldmm5


    --
    cizetta
    ------------------------------------------------------------------------
    cizetta's Profile: http://forums.opensuse.org/member.php?userid=20276
    View this thread: http://forums.opensuse.org/showthread.php?t=402870


  6. #6
    brucecadieux NNTP User

    Default Re: HPLIP failed with status code 2


    dr1445;1915562 Wrote:
    > i had the same problem, downloaded and installed hplip-1.7.4a.run which
    > works ok to run my hp printer. as suggested maybe 2.8 is in need of of
    > the libphoto file to load correctly.


    Why would you install such an old version when suse ships with 2.8.7

    HPLIP 2.8.7 is included with openSUSE


    --
    brucecadieux
    ------------------------------------------------------------------------
    brucecadieux's Profile: http://forums.opensuse.org/member.php?userid=1373
    View this thread: http://forums.opensuse.org/showthread.php?t=402870


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •