Results 1 to 3 of 3

Thread: Apache2 index.php not loading by default

  1. #1

    Default Apache2 index.php not loading by default

    Hi folks, i'm new in opensuse. I made a project in /srv/www/htdocs/jsphp/ that contains the index.php
    I created a virtual host named jsphp.local and it seems to be working fine since I can load jsphp.local/index.php , but when I load jsphp.local it load the index.html from htdocs directory (/srv/www/htdocs/index.html) instead the index.php from jsphp.
    I tried adding DirectoryIndex index.php in the httpd configuration file but it doesn't work

    Here is my httpd.conf

    Code:
    #
    ### Global Environment ######################################################
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests.
    
    # run under this user/group id
    Include /etc/apache2/uid.conf
    
    # - how many server processes to start (server pool regulation)
    # - usage of KeepAlive
    Include /etc/apache2/server-tuning.conf
    
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog /var/log/apache2/error_log
    
    # generated from default value of APACHE_MODULES in /etc/sysconfig/apache2
    <IfDefine !SYSCONFIG>
      Include /etc/apache2/loadmodule.conf
    </IfDefine>
    
    # IP addresses / ports to listen on
    Include /etc/apache2/listen.conf
    
    # predefined logging formats
    Include /etc/apache2/mod_log_config.conf
    
    # generated from default values of global settings in /etc/sysconfig/apache2
    <IfDefine !SYSCONFIG>
      Include /etc/apache2/global.conf
    </IfDefine>
    
    # optional mod_status, mod_info
    Include /etc/apache2/mod_status.conf
    Include /etc/apache2/mod_info.conf
    
    # mod_reqtimeout protects the server from the so-called "slowloris"
    # attack: The server is not swamped with requests in fast succession,
    # but with slowly transmitted request headers and body, thereby filling up
    # the request slots until the server runs out of them.
    # mod_reqtimeout is lightweight and should deliver good results
    # with the configured default values. You shouldn't notice it at all.
    Include /etc/apache2/mod_reqtimeout.conf
    
    # Fix for CVE-2014-0231 introduces new configuration parameter 
    # CGIDScriptTimeout. This directive and its effect prevent request 
    # workers to be eaten until starvation if cgi programs do not send 
    # output back to the server within the timout set by CGIDScriptTimeout.
    Include /etc/apache2/mod_cgid-timeout.conf
    
    # optional cookie-based user tracking
    # read the documentation before using it!!
    Include /etc/apache2/mod_usertrack.conf
    
    # configuration of server-generated directory listings
    Include /etc/apache2/mod_autoindex-defaults.conf
    
    # associate MIME types with filename extensions
    TypesConfig /etc/apache2/mime.types
    Include /etc/apache2/mod_mime-defaults.conf
    
    # set up (customizable) error responses
    Include /etc/apache2/errors.conf
    
    # global (server-wide) SSL configuration, that is not specific to 
    # any virtual host
    Include /etc/apache2/ssl-global.conf
    
    # forbid access to the entire filesystem by default
    <Directory />
        Options None
        AllowOverride None
        <IfModule !mod_access_compat.c>
            Require all denied
        </IfModule>
        <IfModule mod_access_compat.c>
            Order deny,allow
            Deny from all
        </IfModule>
    </Directory>
    <Directory /srv/www/htdocs/>
        Options Indexes FollowSymLinks
        AllowOverride All
        Require all granted
    </Directory>
    <Directory /srv/www/htdocs/jsphp/>
        DirectoryIndex index.php
        Options Indexes FollowSymLinks
        AllowOverride All
        Require all granted
    </Directory>
    # use .htaccess files for overriding,
    AccessFileName .htaccess
    # and never show them
    <Files ~ "^\.ht">
        <IfModule !mod_access_compat.c>
            Require all denied
        </IfModule>
        <IfModule mod_access_compat.c>
            Order allow,deny
            Deny from all
        </IfModule>
    </Files>
    
    # List of resources to look for when the client requests a directory
    DirectoryIndex index.html index.html.var index.php
    
    ### 'Main' server configuration #############################################
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    Include /etc/apache2/default-server.conf
    
    
    ### Virtual server configuration ############################################
    #
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    #
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs/2.4/vhosts/>
    # for further details before you try to setup virtual hosts.
    #
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    #
    IncludeOptional /etc/apache2/vhosts.d/*.conf
    
    
    # Note: instead of adding your own configuration here, consider 
    #       adding it in your own file (/etc/apache2/httpd.conf.local)
    #       putting its name into APACHE_CONF_INCLUDE_FILES in 
    #       /etc/sysconfig/apache2 -- this will make system updates 
    #       easier :)
    Here is my vhosts/jsphp

    Code:
    #
    # VirtualHost template
    # Note: to use the template, rename it to /etc/apache2/vhost.d/yourvhost.conf. 
    # Files must have the .conf suffix to be loaded.
    #
    # See /usr/share/doc/packages/apache2/README.QUICKSTART for further hints 
    # about virtual hosts.
    #
    # NameVirtualHost statements can be added to /etc/apache2/listen.conf.
    #
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #
    <VirtualHost *:80>
        ServerAdmin webmaster@localhost
        ServerName jsphp.local
    
        # DocumentRoot: The directory out of which you will serve your
        # documents. By default, all requests are taken from this directory, but
        # symbolic links and aliases may be used to point to other locations.
        DocumentRoot /srv/www/htdocs/jsphp/
    
        # if not specified, the global error log is used
        ErrorLog /var/log/apache2/jsphp-error_log
        CustomLog /var/log/apache2/jsphp-access_log combined
    
        # don't loose time with IP address lookups
        HostnameLookups Off
    
        # needed for named virtual hosts
        UseCanonicalName Off
    
        # configures the footer on server-generated documents
        ServerSignature On
    
    
        # Optionally, include *.conf files from /etc/apache2/conf.d/
        #
        # For example, to allow execution of PHP scripts:
        #
        # Include /etc/apache2/conf.d/php5.conf
        #
        # or, to include all configuration snippets added by packages:
        # Include /etc/apache2/conf.d/*.conf
    
    
        # ScriptAlias: This controls which directories contain server scripts.
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the realname directory are treated as applications and
        # run by the server when requested rather than as documents sent to the client.
        # The same rules about trailing "/" apply to ScriptAlias directives as to
        # Alias.
        #
        ScriptAlias /cgi-bin/ "/srv/www/vhosts/dummy-host.example.com/cgi-bin/"
    
        # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
        # CGI directory exists, if you have one, and where ScriptAlias points to.
        #
        <Directory "/srv/www/htdocs/jsphp/">
        AllowOverride All
        Options +ExecCGI -Includes
            <IfModule !mod_access_compat.c>
                  Require all granted
            </IfModule>
            <IfModule mod_access_compat.c>
            Order allow,deny
            Allow from all
        </IfModule>
        </Directory>
    
    
        # UserDir: The name of the directory that is appended onto a user's home
        # directory if a ~user request is received.
        #
        # To disable it, simply remove userdir from the list of modules in APACHE_MODULES
        # in /etc/sysconfig/apache2.
        #
        <IfModule mod_userdir.c>
        # Note that the name of the user directory ("public_html") cannot simply be
        # changed here, since it is a compile time setting. The apache package
        # would have to be rebuilt. You could work around by deleting
        # /usr/sbin/suexec, but then all scripts from the directories would be
        # executed with the UID of the webserver.
        UserDir public_html
        # The actual configuration of the directory is in
        # /etc/apache2/mod_userdir.conf.
        Include /etc/apache2/mod_userdir.conf
        # You can, however, change the ~ if you find it awkward, by mapping e.g.
        # http://www.example.com/users/karl-heinz/ --> /home/karl-heinz/public_html/
        #AliasMatch ^/users/([a-zA-Z0-9-_.]*)/?(.*) /home/$1/public_html/$2
        </IfModule>
    
    
        #
        # This should be changed to whatever you set DocumentRoot to.
        #
        <Directory "/srv/www/htdocs/jsphp/">
        
        #
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        #
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        #
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.4/mod/core.html#options
        # for more information.
        #
        Options Indexes FollowSymLinks
        
        #
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
        #
        AllowOverride All
        
        #
        # Controls who can get stuff from this server.
        #
        <IfModule !mod_access_compat.c>
            Require all granted
        </IfModule>
        <IfModule mod_access_compat.c>
            Order allow,deny
            Allow from all
        </IfModule>
        
        </Directory>
    
    </VirtualHost>
    And here is my etc/hosts

    Code:
    #
    # hosts         This file describes a number of hostname-to-address
    #               mappings for the TCP/IP subsystem.  It is mostly
    #               used at boot time, when no name servers are running.
    #               On small systems, this file can be used instead of a
    #               "named" name server.
    # Syntax:
    #    
    # IP-Address  Full-Qualified-Hostname  Short-Hostname
    #
    
    127.0.0.1    localhost
    127.0.0.1    default.local
    127.0.0.1    jsphp.local
    
    # special IPv6 addresses
    ::1             localhost ipv6-localhost ipv6-loopback
    
    fe00::0         ipv6-localnet
    
    ff00::0         ipv6-mcastprefix
    ff02::1         ipv6-allnodes
    ff02::2         ipv6-allrouters
    ff02::3         ipv6-allhosts
    What else can I try? Thanks in advance!

  2. #2

    Default Re: Apache2 index.php not loading by default

    Quote Originally Posted by gbaldassarri View Post
    Here is my vhosts/jsphp
    vhosts/jsphp?
    It should be in /etc/apache2/vhosts.d/, and it should be named jsphp.conf.
    The name doesn't matter, but especially the .conf is important!

    See the comment at the beginning of your file:
    Code:
    #
    # VirtualHost template
    # Note: to use the template, rename it to /etc/apache2/vhost.d/yourvhost.conf. 
    # Files must have the .conf suffix to be loaded.
    Could it be that this is the problem?

    And just to be sure: I think you need to restart Apache (systemctl restart apache2) or reboot after you create the file.
    Last edited by wolfi323; 17-Mar-2016 at 13:01.

  3. #3

    Default Re: Apache2 index.php not loading by default

    Tanks Wolfi, that worked but I had to reboot the system after create the new file as you said. Thanks a lot!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •