Results 1 to 6 of 6

Thread: Troubleshooting "Hibernate" in Leap

  1. #1

    Default Troubleshooting "Hibernate" in Leap

    Hi guyz,

    As i understand the "hibernate and suspend" in the Leap are managed differently from other versions of OpenSuse, cuz the location of files and commands from this article https://en.opensuse.org/SDB:Suspend_to_disk are not working for Leap, (it's mentioned in this post a little)

    Now i dunno how to fix hibernation problem for my newly installed Leap.
    I have 4 GB ram and 6GB swap and installed Nvidia proprietary driver, but whenever I press the hibernate button, it seems that the process gets started, but after 30 secs, the system goes to an unresponsive state and i have to shutdown my system by force (holding power button for 10 secs).

    can someone tell me where configuration files are located (things like /etc/suspend.conf)and how can I troubleshoot hibernation in Leap?

    Thanks a lot


  2. #2
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Troubleshooting "Hibernate" in Leap

    Is this a laptop?is it an Optimus? If so don't use the NVIDIA driver use bumblebee

  3. #3

    Default Re: Troubleshooting "Hibernate" in Leap

    Quote Originally Posted by gogalthorp View Post
    Is this a laptop?is it an Optimus? If so don't use the NVIDIA driver use bumblebee
    Hi gogalthorp and thanks for your reply,

    It's a laptop, Acer 5741G, it only has one VGA, which is Nvidia GT320m, it is an Optimus?

    Regards

  4. #4
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Troubleshooting "Hibernate" in Leap

    Don't know most are these days. Show lspci as root and see if an Intel GPU shows up also. If it is only NVIDIA then the NVIDIA driver is OK

  5. #5

    Default Re: Troubleshooting "Hibernate" in Leap

    Quote Originally Posted by gogalthorp View Post
    Don't know most are these days. Show lspci as root and see if an Intel GPU shows up also. If it is only NVIDIA then the NVIDIA driver is OK
    Thanks gogalthorp,
    I don't have the Intel GPU,
    so what should I do for my issue?

    Code:
    mhm@linux-rfkb:~> sudo lspci
    root's password:
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation HM55 Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    01:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2)
    01:00.1 Audio device: NVIDIA Corporation GT216 HDMI Audio Controller (rev a1)
    02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
    03:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)

    Regards

  6. #6
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Troubleshooting "Hibernate" in Leap

    Is everything fully up to date??

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •