I'm using a clean install of Leap, and am liking it 90% of the time. The other 10% are problems that I need to fix. This is one of them.
After suspending to RAM, when I resume one of the following four things happen:
- The keyboard is frozen HARD and can NOT be fixed. Hitting NumLock or CapsLock does not turn their lights on or off; hitting Fn keys (Fn+F5 to toggle the touchpad on my machine, for example) does nothing; I can't open virtual terminals; even the Magic SysRq keys do NOT work. It's as if the keyboard cable had been cut. The only solution to this is to hold the power button for 10 seconds to shut of the computer.
- The keyboard is frozen hard but by closing the lid, waiting, and opening it again (2-3 times sometimes) I can get it to work. This may or may not be the same problem as above.
- After logging back in, the desktop is a black screen, there are no panels, and only a mouse cursor is visible. Here I can try to restart plasma5, but it tends to not last, so I have to reboot.
- Normal operation. Probably happens only 40-50% of the time.
What's going on here? 1 and 2 happened every once in a while in 13.2 (say, 1 of every 20 times I resumed). 3. Never happened. Now, 1 and 2 happen maybe 40% of the time and 3 the other 10%.
Thanks for any help!
Code:
$ sudo inxi -Fxxzroot's password:
System: Host: MyBox Kernel: 4.1.12-1-default x86_64 (64 bit, gcc: 4.8.5)
Console tty 0 Distro: /etc/SuSE-release corrupted, use -% to override
Machine: System: TOSHIBA product: Satellite P55-B version: PSPNUP Chassis: type: 10
Mobo: TOSHIBA model: VG20SQ Bios: TOSHIBA version: 1.30 date: 08/14/2014
CPU: Quad core Intel Core i7-4710HQ CPU (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19955.5
Clock Speeds: 1: 3271.875 MHz 2: 3228.125 MHz 3: 3373.632 MHz 4: 3315.917 MHz 5: 3317.773 MHz 6: 3301.562 MHz 7: 3335.156 MHz 8: 3331.152 MHz
Graphics: Card: Intel 4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0
X.org: 1.17.2 drivers: ati,radeon,intel (unloaded: fbdev,vesa) tty size: 176x23 Advanced Data: N/A for root out of X
Audio: Card-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0
Card-2: Intel 8 Series/C220 Series Chipset High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k4.1.12-1-default
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: d000 bus-ID: 04:00.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Card-2: Intel Wireless 7260 driver: iwlwifi bus-ID: 03:00.0
IF: wlan0 state: down mac: <filter>
Drives: HDD Total Size: 2960.6GB (68.0% used) 1: /dev/sda ST2000LM003_HN 2000.4GB
2: /dev/sdb SanDisk_SDSSDHII 960.2GB
Partition: ID: / size: 80G used: 12G (15%) fs: btrfs ID: /boot size: 379M used: 38M (11%) fs: ext4
ID: /tmp size: 80G used: 12G (15%) fs: btrfs ID: /home size: 792G used: 655G (83%) fs: ext4
ID: swap-1 size: 10.74GB used: 0.00GB (0%) fs: swap
Sensors: Error: You do not have the sensors app installed.
Info: Processes: 333 Uptime: 10:48 Memory: 5423.5/11926.6MB Runlevel: 5 Gcc sys: 4.8.5 Client: Shell inxi: 1.7.24
me@MyBox { ~ } $
Resume from suspend to RAM problems: freezing, frozen keyboard, black screen
Originally Posted by Stephen_Fishboy
Bookmarks