LIRC as installed via zypper would appear to be missing the one driver that I need: irman. Is there any way around this (an alternate package maybe) that I can use other than compiling it myself?
I compiled and installed libirman 0.4.5, but that did not change the output of the following:
Further research tells me that libirman must be installed when compiling LIRC in order for it to add the irman driver. I can see why this didn’t happen since libirman isn’t even a package. Would it be possible that the next version of LIRC in the main repo could be compiled with libirman too? It’s available here: https://sourceforge.net/projects/lirc/files/libirman/.
Well, as libirman is not included in the distribution, it’s not possible to add this with an update I suppose.
But it should be possible to include it in the next openSUSE release, if somebody is willing to create a package and submit it to Factory.
Updates normally only provide bug and security fixes.
No new packages.
OTOH, libirman is quite old, the last release was in 2009.
There might be a reason why it’s not included.
Although apparently it never was in openSUSE at all AFAICS.
Should I file it under 13.2 or Factory?
Doesn’t matter I suppose.
As you are using 13.2 I think that’s the better choice, but as explained I wouldn’t really expect it to be fixed in 13.2…
Thank you very much. I’ve been trying to get this to work now for several days.
$ irrecord -n -H irman -d /dev/ttyACM0 Remote003.conf
irrecord - application for recording IR-codes for usage with lirc
Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)
irrecord: could not create lock file "/var/lock/LCK..ttyACM0"
irrecord: Permission denied
irrecord: could not create lock files
irrecord: could not init hardware (lircd running ? --> close it, check permissions)
Am I suposed to be able to create lock files as non-root? And as root:
# irrecord -n -H irman -d /dev/ttyACM0 Remote003.conf
irrecord - application for recording IR-codes for usage with lirc
Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)
---It hangs here for a while---
irrecord: could not open /dev/ttyACM0
irrecord: irman_init(): Connection timed out
irrecord: WARNING: invalid lockfile (/var/lock/asound.state.lock) detected
irrecord: could not init hardware (lircd running ? --> close it, check permissions)
It leaves a lock file behind afterwards that I have to delete. I’m pretty darn sure that LIRC isn’t running and my device is connected (it appears in /dev), so I don’t know what’s going on.
Hmm. That still didn’t help. It still needs root. I just experimented and the usbx driver seems to work somewhat. It properly records commands, but I once I start LIRC with its generated config file, I get no output from irw. I’ve tried using both the service and the I should be using irman, but usbx seems to be yielding better results. Here’s the config it generated and I moved to /etc/lirc/lircd.conf:
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.0(usbx) on Wed Aug 5 14:44:14 2015
#
# contributed by
#
# brand: lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name lircd.conf
bits 48
eps 30
aeps 100
one 0 0
zero 0 0
gap 215959
toggle_bit_mask 0x0
begin codes
KEY_0 0x666536383936 0x000066666666
KEY_1 0x666535306166 0x000066666666
KEY_2 0x666539303666 0x000066666666
KEY_3 0x666531306566 0x000066666666
KEY_4 0x666537303866 0x000066666666
KEY_5 0x666562303466 0x000066666666
KEY_6 0x666533306366 0x000066666666
KEY_7 0x666534386236 0x000066666666
KEY_8 0x666538383736 0x000066666666
KEY_9 0x666530386636 0x000066666666
KEY_BACKSPACE 0x666538303766 0x000066666666
KEY_ENTER 0x666538323764 0x000066666666
KEY_UP 0x666562383436 0x000066666666
KEY_DOWN 0x666537613834 0x000066666666
KEY_LEFT 0x666537383836 0x000066666666
KEY_RIGHT 0x666533386336 0x000066666666
KEY_OK 0x666535616134 0x000066666666
KEY_STOP 0x666565303166 0x000066666666
KEY_BACK 0x666531616534 0x000066666666
KEY_PREVIOUS 0x666533326364 0x000066666666
KEY_NEXT 0x666562323464 0x000066666666
KEY_PLAY 0x666561323564 0x000066666666
KEY_RECORD 0x666532306466 0x000066666666
KEY_REWIND 0x666531326564 0x000066666666
KEY_FORWARD 0x666539323664 0x000066666666
KEY_PAUSE 0x666532326464 0x000066666666
KEY_MENU 0x666534326264 0x000066666666
KEY_MODE 0x666539613634 0x000066666666
KEY_EXIT 0x666539613634 0x000066666666
KEY_POWER 0x666534306266 0x000066666666
KEY_EJECT 0x666530306666 0x000066666666
KEY_BLUE 0x666563303366 0x000066666666
KEY_INFO 0x666531386536 0x000066666666
KEY_SUBTITLE 0x666536303966 0x000066666666
KEY_GREEN 0x666561303566 0x000066666666
KEY_RED 0x666532386436 0x000066666666
KEY_YELLOW 0x666535386136 0x000066666666
KEY_ESC 0x666539383636 0x000066666666
KEY_NUMERIC_STAR 0x666561383536 0x000066666666
KEY_PAGEUP 0x666564303266 0x000066666666
KEY_PAGEDOWN 0x666566303066 0x000066666666
KEY_CHANNELUP 0x666530326664 0x000066666666
KEY_CHANNELDOWN 0x666561613534 0x000066666666
end codes
end remote
Before you ask, no, all these commands aren’t actually on my remote (they have differnt names), but LIRC and my Harmony Remote don’t need to know that.
Sort of fantastic news! I got irman to work (sort of)! My device need a firmware update. Apparently irman sends out “IR” at the start and the device must then write “OK” in response. As before, I can irrecord (now with irrecord), but neither the service nor starting lirc manually works. I still can’t get irw to work! It connects to the socket and all, but nothing is echoed out when I press buttons. It’s the same problem that I had with usbx. I think that it may be a problem with that special version of lirc.