Page 3 of 9 FirstFirst 12345 ... LastLast
Results 21 to 30 of 82

Thread: eID-Kaartlezer Model CI692 van houseofaccesories

  1. #21
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,864
    Blog Entries
    15

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    Hi
    Device is;
    Bus 002 Device 002: ID 0bda:0165 Realtek Semiconductor Corp.

    This one;
    http://pcsclite.alioth.debian.org/cc...l#0x0BDA0x0165

    Install pcsc-tools from;
    http://download.opensuse.org/reposit...openSUSE_13.2/

    root user;
    Code:
    pcsc_scan
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  2. #22

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    Pcsc_scan code:

    Als het goed is hebt u de gebruikelijke informatie ontvangen van uw
    systeembeheerder. Gewoonlijk komt het neer op de volgende drie punten:

    1. Respecteer de privacy van anderen.
    2. Denk na voordat u iets doet.
    3. Veel mogelijkheden betekend veel verantwoordelijkheid.

    root's password:
    sudo: pcsc_scan: opdracht niet gevonden
    gifmosjette@linux-ddn5:~> pcsc_scan
    If 'pcsc_scan' is not a typo you can use command-not-found to lookup the package that contains it, like this:
    cnf pcsc_scan
    gifmosjette@linux-ddn5:~>
    cnf pcsc_scan

    gifmosjette@linux-ddn5:~> cnf pcsc_scan
    pcsc_scan: commando niet gevonden
    gifmosjette@linux-ddn5:~>

    De voorbije nacht openSUSE 13.2 KDE 32bit op laptop Medion P6624 geïnstalleerd.
    Via de eID website de pakketten eID-middleware binnengehaald en geïnstalleerd.
    Via Yast alles gecontroleerd. =ok. Ook de kaartlezer werkt! Kon de identiteitskaart uitlezen, certificaten bijwerken = ok!
    Maar de viewer was nergens te vinden in geïnstalleerde programma's.
    Via de website dan de viewer binnengehaald en zelf proberen te installeren = niet goed gelukt --kon alleen maar uitpakken
    en dan aanklikkend moest ik nog iets van java installeren wat ik deed.
    Toen lukte het wel om de kaartlezer te gebruiken.

    Deze morgen opstarten computer = kaartlezer reageert niet (geen brandend lampje).
    Als ik dan de viewer wil aanspreken dan krijg ik de melding dat er een kaartlezer moet aangesloten worden. Wat niet lukt.
    De kaartlezer is er niet te zien en er brandt op de kaartlezer ook geen groen lampje.
    Geprobeerd bovenstaande instructies uit te voeren maar er is een onverwachte fout opgetreden tijdens installeren waardoor de installatie mislukt.

    Wat nu? Hoe vind ik die foutcode via de terminal want dat is voor mij nog niet zo evident-= beginneling.

    Hoe moet het nu verder?

    Mvg;,
    Mauk.

  3. #23

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    Aan de laptop is de DIGIPASS BY VASCO DP905v1.1 aangesloten. pcsc_scan geeft niks weer, zie ook code hierboven (vorige berichten).
    Heb enkele plaatjes via knurpht@opensuse doorgemaild in verband met de niet meer te benaderen eID-kaartlezer.
    Er zijn ook een aantal pakketten die niet geïnstalleerd kunnen worden omdat ze conflecteren met ander pakketten.
    Hoe op te lossen?
    Graag verdere hulp en begeleiding.
    Met dank,
    Mauk.

    Code:

    gifmosjette@linux-ddn5:~> pcsc_scan
    If 'pcsc_scan' is not a typo you can use command-not-found to lookup the package that contains it, like this:
    cnf pcsc_scan
    gifmosjette@linux-ddn5:~> cnf pcsc_scan
    pcsc_scan: commando niet gevonden
    gifmosjette@linux-ddn5:~>

    Code:
    gifmosjette@linux-ddn5:~> cnf zipper pcsc
    zipper: bezig met zoeken ...Cannot not open database file '/usr/share/scout/bin-pcsc.db'
    zipper: commando niet gevonden
    gifmosjette@linux-ddn5:~>

  4. #24

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    Nieuwe code van de Medionlaptop P6624 met DIGIPASS BY VASCO DP905v1.1.
    gifmosjette@linux-ddn5:~> sudo lsusb -v
    root's password:

    Bus 002 Device 005: ID 1a44:0001 VASCO Data Security International Digipass 905 SmartCard Reader
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x1a44 VASCO Data Security International
    idProduct 0x0001 Digipass 905 SmartCard Reader
    bcdDevice 1.02
    iManufacturer 1 VASCO
    iProduct 2 DP905v1.1
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 93
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 50mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 3
    bInterfaceClass 11 Chip/SmartCard
    bInterfaceSubClass 0
    bInterfaceProtocol 0
    iInterface 0
    ChipCard Interface Descriptor:
    bLength 54
    bDescriptorType 33
    bcdCCID 1.00
    nMaxSlotIndex 0
    bVoltageSupport 3 5.0V 3.0V
    dwProtocols 3 T=0 T=1
    dwDefaultClock 3700
    dwMaxiumumClock 3700
    bNumClockSupported 1
    dwDataRate 9946 bps
    dwMaxDataRate 318280 bps
    bNumDataRatesSupp. 53
    dwMaxIFSD 254
    dwSyncProtocols 00000007 2-wire 3-wire I2C
    dwMechanical 00000000
    dwFeatures 000404BE
    Auto configuration based on ATR
    Auto activation on insert
    Auto voltage selection
    Auto clock change
    Auto baud rate change
    Auto PPS made by CCID
    Auto IFSD exchange
    Short and extended APDU level exchange
    dwMaxCCIDMsgLen 272
    bClassGetResponse echo
    bClassEnvelope echo
    wlcdLayout none
    bPINSupport 0
    bMaxCCIDBusySlots 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 32
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0010 1x 16 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x83 EP 3 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0010 1x 16 bytes
    bInterval 0
    Device Status: 0x0000
    (Bus Powered)

    Bus 002 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x046d Logitech, Inc.
    idProduct 0xc52b Unifying Receiver
    bcdDevice 12.01
    iManufacturer 1 Logitech
    iProduct 2 USB Receiver
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 84
    bNumInterfaces 3
    bConfigurationValue 1
    iConfiguration 4 RQR12.01_B0019
    bmAttributes 0xa0
    (Bus Powered)
    Remote Wakeup
    MaxPower 98mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 1 Keyboard
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 59
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 8
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 2 Mouse
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 148
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 2
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 2
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 98
    Report Descriptors:
    ** UNAVAILABLE **

  5. #25

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    Medionlaptop Code 2de zending vervolg zending1.
    gifmosjette@linux-ddn5:~> sudo lsusb -v
    root's password:

    Bus 002 Device 005: ID 1a44:0001 VASCO Data Security International Digipass 905 SmartCard Reader
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x1a44 VASCO Data Security International
    idProduct 0x0001 Digipass 905 SmartCard Reader
    bcdDevice 1.02
    iManufacturer 1 VASCO
    iProduct 2 DP905v1.1
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 93
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 50mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 3
    bInterfaceClass 11 Chip/SmartCard
    bInterfaceSubClass 0
    bInterfaceProtocol 0
    iInterface 0
    ChipCard Interface Descriptor:
    bLength 54
    bDescriptorType 33
    bcdCCID 1.00
    nMaxSlotIndex 0
    bVoltageSupport 3 5.0V 3.0V
    dwProtocols 3 T=0 T=1
    dwDefaultClock 3700
    dwMaxiumumClock 3700
    bNumClockSupported 1
    dwDataRate 9946 bps
    dwMaxDataRate 318280 bps
    bNumDataRatesSupp. 53
    dwMaxIFSD 254
    dwSyncProtocols 00000007 2-wire 3-wire I2C
    dwMechanical 00000000
    dwFeatures 000404BE
    Auto configuration based on ATR
    Auto activation on insert
    Auto voltage selection
    Auto clock change
    Auto baud rate change
    Auto PPS made by CCID
    Auto IFSD exchange
    Short and extended APDU level exchange
    dwMaxCCIDMsgLen 272
    bClassGetResponse echo
    bClassEnvelope echo
    wlcdLayout none
    bPINSupport 0
    bMaxCCIDBusySlots 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 32
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0010 1x 16 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x83 EP 3 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0010 1x 16 bytes
    bInterval 0
    Device Status: 0x0000
    (Bus Powered)

    Bus 002 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x046d Logitech, Inc.
    idProduct 0xc52b Unifying Receiver
    bcdDevice 12.01
    iManufacturer 1 Logitech
    iProduct 2 USB Receiver
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 84
    bNumInterfaces 3
    bConfigurationValue 1
    iConfiguration 4 RQR12.01_B0019
    bmAttributes 0xa0
    (Bus Powered)
    Remote Wakeup
    MaxPower 98mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 1 Keyboard
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 59
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 8
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 2 Mouse
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 148
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 2
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 2
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 98
    Report Descriptors:
    ** UNAVAILABLE **

  6. #26

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    3de zending medionlaptop vervolg zending 2.

    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 3.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 3
    bMaxPacketSize0 9
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0003 3.0 root hub
    bcdDevice 3.16
    iManufacturer 3 Linux 3.16.7-21-desktop xhci_hcd
    iProduct 2 xHCI Host Controller
    iSerial 1 0000:04:00.0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 31
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    bMaxBurst 0
    Hub Descriptor:
    bLength 12
    bDescriptorType 42
    nNbrPorts 2
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    bHubDecLat 0.0 micro seconds
    wHubDelay 0 nano seconds
    DeviceRemovable 0x00
    Hub Port Status:
    Port 1: 0000.02a0 5Gbps power Rx.Detect
    Port 2: 0000.02a0 5Gbps power Rx.Detect
    Binary Object Store Descriptor:
    bLength 5
    bDescriptorType 15
    wTotalLength 15
    bNumDeviceCaps 1
    SuperSpeed USB Device Capability:
    bLength 10
    bDescriptorType 16
    bDevCapabilityType 3
    bmAttributes 0x02
    Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported 0x0008
    Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport 3
    Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat 0 micro seconds
    bU2DevExitLat 0 micro seconds
    Device Status: 0x0001
    Self Powered

    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 3.16
    iManufacturer 3 Linux 3.16.7-21-desktop xhci_hcd
    iProduct 2 xHCI Host Controller
    iSerial 1 0000:04:00.0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0001
    Self Powered

    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x8087 Intel Corp.
    idProduct 0x0020 Integrated Rate Matching Hub
    bcdDevice 0.00
    iManufacturer 0
    iProduct 0
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0001 1x 1 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 6
    wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
    bPwrOn2PwrGood 50 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Port 3: 0000.0100 power
    Port 4: 0000.0100 power
    Port 5: 0000.0100 power
    Port 6: 0000.0100 power
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0001
    Self Powered

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 3.16
    iManufacturer 3 Linux 3.16.7-21-desktop ehci_hcd
    iProduct 2 EHCI Host Controller
    iSerial 1 0000:00:1a.0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x06
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0507 highspeed power suspend enable connect
    Port 2: 0000.0100 power
    Device Status: 0x0001
    Self Powered

  7. #27

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    4de zending code medionlaptop vervolg zending3.
    gifmosjette@linux-ddn5:~> gifmosjette@linux-ddn5:~> sudo lsusb -v
    gifmosjette@linux-ddn5:~: command not found
    gifmosjette@linux-ddn5:~> root's password:
    >
    > Bus 002 Device 005: ID 1a44:0001 VASCO Data Security International Digipass 905 SmartCard Reader
    > Device Descriptor:
    > bLength 18
    > bDescriptorType 1
    > bcdUSB 1.10
    > bDeviceClass 0 (Defined at Interface level)
    > bDeviceSubClass 0
    > bDeviceProtocol 0
    > bMaxPacketSize0 8
    > idVendor 0x1a44 VASCO Data Security International
    > idProduct 0x0001 Digipass 905 SmartCard Reader
    > bcdDevice 1.02
    > iManufacturer 1 VASCO
    > iProduct 2 DP905v1.1
    > iSerial 0
    > bNumConfigurations 1
    > Configuration Descriptor:
    > bLength 9
    > bDescriptorType 2
    > wTotalLength 93
    > bNumInterfaces 1
    > bConfigurationValue 1
    > iConfiguration 0
    > bmAttributes 0x80
    > (Bus Powered)
    > MaxPower 50mA
    > Interface Descriptor:
    > bLength 9
    > bDescriptorType 4
    > bInterfaceNumber 0
    > bAlternateSetting 0
    > bNumEndpoints 3
    > bInterfaceClass 11 Chip/SmartCard
    > bInterfaceSubClass 0
    > bInterfaceProtocol 0
    > iInterface 0
    > ChipCard Interface Descriptor:
    > bLength 54
    > bDescriptorType 33
    > bcdCCID 1.00
    > nMaxSlotIndex 0
    > bVoltageSupport 3 5.0V 3.0V
    > dwProtocols 3 T=0 T=1
    > dwDefaultClock 3700
    > dwMaxiumumClock 3700
    > bNumClockSupported 1
    > dwDataRate 9946 bps
    > dwMaxDataRate 318280 bps
    > bNumDataRatesSupp. 53
    > dwMaxIFSD 254
    > dwSyncProtocols 00000007 2-wire 3-wire I2C
    > dwMechanical 00000000
    > dwFeatures 000404BE
    > Auto configuration based on ATR
    > Auto activation on insert
    > Auto voltage selection
    > Auto clock change
    > Auto baud rate change
    > Auto PPS made by CCID
    > Auto IFSD exchange
    > Short and extended APDU level exchange
    > dwMaxCCIDMsgLen 272
    > bClassGetResponse echo
    > bClassEnvelope echo
    > wlcdLayout none
    > bPINSupport 0
    > bMaxCCIDBusySlots 1
    > Endpoint Descriptor:
    > bLength 7
    > bDescriptorType 5
    > bEndpointAddress 0x81 EP 1 IN
    > bmAttributes 3
    > Transfer Type Interrupt
    > Synch Type None
    > Usage Type Data
    > wMaxPacketSize 0x0004 1x 4 bytes
    Nu> bInterval 32
    > Endpoint Descriptor:
    > bLength 7
    > bDescriptorType 5
    > bEndpointAddress 0x02 EP 2 OUT
    > bmAttributes 2
    > Transfer Type Bulk
    > Synch Type None
    > Usage Type Data
    > wMaxPacketSize 0x0010 1x 16 bytes
    > bInterval 0
    > Endpoint Descriptor:
    > bLength 7
    > bDescriptorType 5
    > bEndpointAddress 0x83 EP 3 IN
    > bmAttributes 2
    > Transfer Type Bulk
    > Synch Type None
    > Usage Type Data
    > wMaxPacketSize 0x0010 1x 16 bytes
    > bInterval 0
    > Device Status: 0x0000
    > (Bus Powered)
    >
    > Bus 002 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver
    > Device Descriptor:
    > bLength 18
    > bDescriptorType 1
    > bcdUSB 2.00
    > bDeviceClass 0 (Defined at Interface level)
    > bDeviceSubClass 0
    > bDeviceProtocol 0
    > bMaxPacketSize0 8
    > idVendor 0x046d Logitech, Inc.
    > idProduct 0xc52b Unifying Receiver
    > bcdDevice 12.01
    > iManufacturer 1 Logitech
    > iProduct 2 USB Receiver
    > iSerial 0
    > bNumConfigurations 1
    > Configuration Descriptor:
    > bLength 9
    > bDescriptorType 2
    > wTotalLength 84
    > bNumInterfaces 3
    > bConfigurationValue 1
    > iConfiguration 4 RQR12.01_B0019
    > bmAttributes 0xa0
    > (Bus Powered)
    > Remote Wakeup
    > MaxPower 98mA
    > Interface Descriptor:
    > bLength 9
    > bDescriptorType 4
    > bInterfaceNumber 0
    > bAlternateSetting 0
    > bNumEndpoints 1
    > bInterfaceClass 3 Human Interface Device
    > bInterfaceSubClass 1 Boot Interface Subclass
    > bInterfaceProtocol 1 Keyboard
    > iInterface 0
    > HID Device Descriptor:
    > bLength 9
    > bDescriptorType 33
    > bcdHID 1.11
    > bCountryCode 0 Not supported
    > bNumDescriptors 1
    > bDescriptorType 34 Report
    > wDescriptorLength 59
    > Report Descriptors:
    > ** UNAVAILABLE **
    > Endpoint Descriptor:
    > bLength 7
    > bDescriptorType 5
    > bEndpointAddress 0x81 EP 1 IN
    > bmAttributes 3
    > Transfer Type Interrupt
    > Synch Type None
    > Usage Type Data
    > wMaxPacketSize 0x0008 1x 8 bytes
    > bInterval 8
    > Interface Descriptor:
    > bLength 9
    > bDescriptorType 4
    > bInterfaceNumber 1
    > bAlternateSetting 0
    > bNumEndpoints 1
    > bInterfaceClass 3 Human Interface Device
    > bInterfaceSubClass 1 Boot Interface Subclass
    > bInterfaceProtocol 2 Mouse
    > iInterface 0
    > HID Device Descriptor:
    > bLength 9
    > bDescriptorType 33
    > bcdHID 1.11
    > bCountryCode 0 Not supported
    > bNumDescriptors 1
    > bDescriptorType 34 Report
    > wDescriptorLength 148
    > Report Descriptors:
    > ** UNAVAILABLE **
    > Endpoint Descriptor:
    > bLength 7
    > bDescriptorType 5
    > bEndpointAddress 0x82 EP 2 IN
    > bmAttributes 3
    > Transfer Type Interrupt
    > Synch Type None
    > Usage Type Data
    > wMaxPacketSize 0x0008 1x 8 bytes
    > bInterval 2
    > Interface Descriptor:
    > bLength 9
    > bDescriptorType 4
    > bInterfaceNumber 2
    > bAlternateSetting 0
    > bNumEndpoints 1
    > bInterfaceClass 3 Human Interface Device
    > bInterfaceSubClass 0 No Subclass
    > bInterfaceProtocol 0 None
    > iInterface 0
    > HID Device Descriptor:
    > bLength 9
    > bDescriptorType 33
    > bcdHID 1.11
    > bCountryCode 0 Not supported
    > bNumDescriptors 1
    > bDescriptorType 34 Report
    > wDescriptorLength 98
    > Report Descriptors:
    > ** UNAVAILABLE **

    Hopelijk is het goed wat ik deed.
    Een oplossing ? Graag verdere hulp en begeleiding.
    Met dank,
    Mauk.

  8. #28

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    @ malcolmlewis en hcvv,

    door eens de "oude draad (Nederlandstalig en Engelstalig) over "eid" van 2008 ... te lezen op het forum, ontdekt hoe ik geinstalleerde pakketten in verband met pcsc
    in de terminal kan uitvoeren.

    Code:
    gifmosjette@linux-ddn5:~> sudo zypper se pcsc
    root's password:
    Gegevens van installatiebron laden...
    Lezen van geïnstalleerde pakketten...

    S | Naam | Samenvatting | Type
    --+--------------------------+-------------------------------------------+-----------
    i | libpcsclite1 | PCSC Smart Card Library | pakket
    | libpcscspy0 | PCSC Smart Card Library | pakket
    i | pcsc-acr38 | PC/SC IFD Handler for the ACR38 Smart C-> | pakket
    | pcsc-acr38 | PC/SC IFD Handler for the ACR38 Smart C-> | bronpakket
    | pcsc-acr38-devel | PC/SC IFD Handler for the ACR38 Smart C-> | pakket
    i | pcsc-acsccid | PCSC Driver for ACS CCID Based Smart Ca-> | pakket
    | pcsc-acsccid | PCSC Driver for ACS CCID Based Smart Ca-> | bronpakket
    | pcsc-asedriveiiie-serial | ASEDrive IIIe Serial Smartcard Reader D-> | pakket
    | pcsc-asedriveiiie-serial | ASEDrive IIIe Serial Smartcard Reader D-> | bronpakket
    | pcsc-asedriveiiie-usb | ASEDrive IIIe USB Smart Card Reader Dri-> | pakket
    | pcsc-asedriveiiie-usb | ASEDrive IIIe USB Smart Card Reader Dri-> | bronpakket
    | pcsc-asekey | ASEKey USB Token Driver | pakket
    | pcsc-asekey | ASEKey USB Token Driver | bronpakket
    i | pcsc-ccid | PCSC Driver for CCID Based Smart Card R-> | pakket
    | pcsc-ccid | PCSC Driver for CCID Based Smart Card R-> | bronpakket
    | pcsc-cyberjack | PC/SC IFD Handler for the Reiner SCT Cy-> | pakket
    | pcsc-cyberjack | PC/SC IFD Handler for the Reiner SCT Cy-> | bronpakket
    | pcsc-eco5000 | PC/SC IFD Handler for the ECO 5000 Seri-> | pakket
    | pcsc-eco5000 | PC/SC IFD Handler for the ECO 5000 Seri-> | bronpakket
    | pcsc-gempc | PCSC driver for the Gemplus GemPC 410/4-> | pakket
    | pcsc-gempc | PCSC driver for the Gemplus GemPC 410/4-> | bronpakket
    i | pcsc-lite | PCSC Smart Cards Library | pakket
    | pcsc-lite | PCSC Smart Cards Library | bronpakket
    | pcsc-lite-devel | Development package for the MUSCLE proj-> | pakket
    | pcsc-openct | PC/SC IFD Handler for OpenCT Smart Card-> | pakket
    | pcsc-reflex60 | PCSC driver for Schlumberger Reflex 60 -> | pakket
    | pcsc-reflex60 | PCSC driver for Schlumberger Reflex 60 -> | bronpakket
    | pcsc-towitoko | PCSC driver for Towitoko Smart Card Rea-> | pakket
    | pcsc-towitoko | PCSC driver for Towitoko Smart Card Rea-> | bronpakket
    | pcsc-towitoko-devel | PCSC driver for Towitoko Smart Card Rea-> | pakket
    | perl-pcsc | Perl interface to Smart Card Reader | pakket
    | perl-pcsc | Perl interface to Smart Card Reader | bronpakket
    gifmosjette@linux-ddn5:~>

    Hopelijk kunnen jullie daar iets uit afleiden.
    Graag verdere hulp en begeleiding.
    Met dank,
    Mauk.

  9. #29

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    @ malcolmlewis, @ knurpht, @ hcvv,

    ik heb een volledig nieuwe installatie gedaan van openSUSE 13.2 KDE 32bit op de laptop
    Medion Akoya P6624/ Nvidia GeForce GT 425M CUDA 1GB--Nvidia Optimus/ INTEL CORE i3.
    Alle updates laten lopen met Softwarebeheerder Apper en installeren van de pakketten.
    Via eID-Belgium de eID-mw binnengehaald en geïnstalleerd met Apper.
    Ook via de éénklik-installatie ontbrekende pakketten en subpakketten geïnstalleerd.

    Wat tot nu toe opvalt:
    de digipass by vasco (de eID-kaartlezer ) houd voorlopig stand = groenlampje brandt vanaf de herinstallatie , meermaals herstarten nog steeds. Moet nog een herstart doen na het installeren van de eID-mw;

    de eid-viewer is echter nergens te vinden! dus...ik vrees voor de volgende herstart. Zal het na mijn bericht en uitloggen wel weten.
    Ik bericht nog.
    Mvg.,
    Mauk.

  10. #30

    Default Re: eID-Kaartlezer Model CI692 van houseofaccesories

    Mijn vrees (in vorig bericht had ik het er over) is bewaarheid geworden. = Bij de herstart van de computer licht het groene lampje 10 seconden op en dooft dan en het blijft gedoofd. De eID-kaartlezer zal ik dus zeker niet kunnen benaderen.
    Zijn er afhankelijkheden te weinig geïnstalleerd ?
    Ik heb wel, tijdens het installeren van eid-mw een paar keer een waarschuwing gekregen en selfs een error dat het niet kon worden geïnstalleerd.

    De eid-viewer kan ik ook nergens vinden, laat staan die geïnstalleerd krijgen..
    Ik heb die wel opgeslagen -- het is eid-viewer.tar.gz en eid-viewer.jar .
    Maar, ik weet niet wat je er moet mee doen of hoe je een tar. (tarball) of jar. installeert.

    Ik heb aan knurpht meerder mails, met schermafdrukken, verstuurd over dit hangende probleem en in vorige berichten ook de code aan malcolmlewis en hcvv.

    Nu nog een oplossing en dan ben ik een tevreden en gelukkige gebruiker (Belgische) van openSUSE.

    Graag verdere hulp en begeleiding.
    Met dank.

    Mvg.,
    Mauk.

Page 3 of 9 FirstFirst 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •