Page 4 of 4 FirstFirst ... 234
Results 31 to 34 of 34

Thread: Two mouse pointers on screen

  1. #31

    Unhappy Re: Two mouse pointers on screen

    Quote Originally Posted by wolfi323 View Post
    PS: Have a look at this thread:
    https://forums.opensuse.org/showthre...ee-Proxy-Error , in particular comments #8 and #10.

    The OP there got the same "Cannot access secondary GPU - error: Could not load GPU driver" error as you (after the proxy problem when downloading the driver had been sorted out), and the second one apparently fixed it.
    Doesn't work for me

    Tested all option on that post.

    Code:
    alexandre@suse:~> cat /etc/modprobe.d/50-bbswitch.conf
    options bbswitch load_state=1 unload_state=1
    Code:
    alexandre@suse:~> dmesg | grep NVRM
    [   10.192974] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0de9)
    NVRM: installed in this system is not supported by the 346.35
    NVRM: NVIDIA Linux driver release.  Please see 'Appendix
    NVRM: A - Supported NVIDIA GPU Products' in this release's
    NVRM: README, available on the Linux driver download page
    NVRM: at www.nvidia.com.
    [   10.193279] NVRM: The NVIDIA probe routine failed for 1 device(s).
    [   10.193281] NVRM: None of the NVIDIA graphics adapters were initialized!
    [   10.193396] NVRM: NVIDIA init module failed!
    [   21.202847] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0de9)
    NVRM: installed in this system is not supported by the 346.35
    NVRM: NVIDIA Linux driver release.  Please see 'Appendix
    NVRM: A - Supported NVIDIA GPU Products' in this release's
    NVRM: README, available on the Linux driver download page
    NVRM: at www.nvidia.com.
    [   21.203215] NVRM: The NVIDIA probe routine failed for 1 device(s).
    [   21.203217] NVRM: None of the NVIDIA graphics adapters were initialized!
    [   21.203350] NVRM: NVIDIA init module failed!
    [   21.239055] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0de9)
    NVRM: installed in this system is not supported by the 346.35
    NVRM: NVIDIA Linux driver release.  Please see 'Appendix
    NVRM: A - Supported NVIDIA GPU Products' in this release's
    NVRM: README, available on the Linux driver download page
    NVRM: at www.nvidia.com.
    [   21.239408] NVRM: The NVIDIA probe routine failed for 1 device(s).
    [   21.239419] NVRM: None of the NVIDIA graphics adapters were initialized!
    [   21.239556] NVRM: NVIDIA init module failed!
    [   88.400849] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0de9)
    NVRM: installed in this system is not supported by the 346.35
    NVRM: NVIDIA Linux driver release.  Please see 'Appendix
    NVRM: A - Supported NVIDIA GPU Products' in this release's
    NVRM: README, available on the Linux driver download page
    NVRM: at www.nvidia.com.
    [   88.401473] NVRM: The NVIDIA probe routine failed for 1 device(s).
    [   88.401477] NVRM: None of the NVIDIA graphics adapters were initialized!
    [   88.401605] NVRM: NVIDIA init module failed!
    Code:
    alexandre@suse:~> dmesg | grep bbswitch
    [    2.605781] bbswitch: version 0.8
    [    2.605790] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [    2.605797] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [    2.606010] bbswitch: detected an Optimus _DSM function
    [    2.606093] bbswitch: disabling discrete graphics
    [    2.618311] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
    [   21.183025]  serio_raw cfg80211 rfkill pcspkr mii lpc_ich snd mfd_core i2c_i801 mei_me fan thermal battery mei soundcore ac shpchp processor dm_mod efivarfs btrfs xor raid6_pq mxm_wmi crc32c_intel sr_mod cdrom i915 i2c_algo_bit drm_kms_helper hid_logitech_dj drm xhci_hcd video wmi button sg bbswitch(O)
    [   21.219213]  serio_raw cfg80211 rfkill pcspkr mii lpc_ich snd mfd_core i2c_i801 mei_me fan thermal battery mei soundcore ac shpchp processor dm_mod efivarfs btrfs xor raid6_pq mxm_wmi crc32c_intel sr_mod cdrom i915 i2c_algo_bit drm_kms_helper hid_logitech_dj drm xhci_hcd video wmi button sg bbswitch(O)
    [   22.709368] bbswitch: disabling discrete graphics
    [   22.709817]  mii lpc_ich snd mfd_core i2c_i801 mei_me fan thermal battery mei soundcore ac shpchp processor dm_mod efivarfs btrfs xor raid6_pq mxm_wmi crc32c_intel sr_mod cdrom i915 i2c_algo_bit drm_kms_helper hid_logitech_dj drm xhci_hcd video wmi button sg bbswitch(O)
    [   22.709899]  [<ffffffffa00001e0>] bbswitch_off+0x90/0x250 [bbswitch]
    [   22.709905]  [<ffffffffa00005c5>] bbswitch_proc_write+0x95/0xac [bbswitch]
    [   88.202068] bbswitch: enabling discrete graphics
    [   88.380991]  bluetooth r8169 snd_timer 6lowpan_iphc iwlwifi joydev serio_raw cfg80211 rfkill pcspkr mii lpc_ich snd mfd_core i2c_i801 mei_me fan thermal battery mei soundcore ac shpchp processor dm_mod efivarfs btrfs xor raid6_pq mxm_wmi crc32c_intel sr_mod cdrom i915 i2c_algo_bit drm_kms_helper hid_logitech_dj drm xhci_hcd video wmi button sg bbswitch(O)

  2. #32
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    16,140

    Default Re: Two mouse pointers on screen

    Maybe you should mention exactly the hardware since the driver reports it does not support it.

  3. #33
    Join Date
    Nov 2011
    Location
    Germany
    Posts
    100

    Default Re: Two mouse pointers on screen

    So I assume the following is still the present state and you already tried rebooting with this configuration:
    Code:
    alexandre@suse:~> cat /etc/modprobe.d/50-bbswitch.conf
    options bbswitch load_state=1 unload_state=1
    But
    Code:
    [    2.606093] bbswitch: disabling discrete graphics
    [    2.618311] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
    shows, that your discrete graphics card is still switched off by bbswitch before it could be properly initialized.
    The changed file /etc/modprobe.d/50-bbswitch.conf isn't respected without rebuilding the initrd with:
    Code:
    mkinitrd
    and then rebooting.

  4. #34

    Thumbs up Re: Two mouse pointers on screen

    Quote Originally Posted by Brunolab View Post
    So I assume the following is still the present state and you already tried rebooting with this configuration:
    Code:
    alexandre@suse:~> cat /etc/modprobe.d/50-bbswitch.conf
    options bbswitch load_state=1 unload_state=1
    But
    Code:
    [    2.606093] bbswitch: disabling discrete graphics
    [    2.618311] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
    shows, that your discrete graphics card is still switched off by bbswitch before it could be properly initialized.
    The changed file /etc/modprobe.d/50-bbswitch.conf isn't respected without rebuilding the initrd with:
    Code:
    mkinitrd
    and then rebooting.
    It worked.

Page 4 of 4 FirstFirst ... 234

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •