Results 1 to 5 of 5

Thread: Problem mit Broadcom BCM4313 802.11bgn WLAN Adapter

  1. #1

    Exclamation Problem mit Broadcom BCM4313 802.11bgn WLAN Adapter

    Hallo zusammen,

    es geht um ein Problem mit dem Broadcom BCM4313 802.11bgn WLAN Adapter. Ich habe schon div. Lösungen aus dem Forum ausprobiert, komme aber nicht weiter. Dieser Laptop habe ich schon lange mit openSuSE in Betrieb, das WLAN funktionierte auch immer. Angefangen mit 11.4 bis 12.2 via zypper dup.

    Genaues Problem: er findet div. WLAN-Netzwerke verschlüsselt (meins, Nachbarn) und unverschlüsselt (Freifunk), möchte sich aber zu keinem verbinden, Networkmanager sagt immer Schnittstelle wird eingerichtet, bricht dann aber ab.

    Es geht um einen HP ProBook 6550b mit openSuSE 13.2 frisch installiert + packman (+vlc,thunderbird...)

    dmesg:

    Code:
    [   34.098536] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
    [   35.216692] audit: type=1305 audit(1420396357.575:2): audit_pid=1063 old=0 auid=4294967295 ses=4294967295 res=1
    [   37.175413] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   37.175417] Bluetooth: BNEP filters: protocol multicast
    [   37.175430] Bluetooth: BNEP socket layer initialized
    [   49.725600] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [   49.826179] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [   49.826318] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [   49.895180] NET: Registered protocol family 17
    [   52.744971] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    [   52.745021] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
    [   60.565368] fuse init (API version 7.23)
    [   65.363331] Bluetooth: RFCOMM TTY layer initialized
    [   65.363353] Bluetooth: RFCOMM socket layer initialized
    [   65.363364] Bluetooth: RFCOMM ver 1.11
    [   73.118129] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  109.181848] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  134.127899] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  137.127051] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  160.142374] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  172.196796] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  197.132530] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  200.132441] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  223.134422] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  256.136950] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  299.176946] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  352.146734] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  396.559565] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [  396.559581] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [  396.559592] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
    [  396.562027] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [  396.562034] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [  396.562042] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
    [  415.209470] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  478.176191] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  541.167073] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  604.188285] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  667.192311] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  730.240730] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  793.191722] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  856.253398] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  919.242694] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [  982.238318] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1045.270991] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1108.220559] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1171.242904] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1234.282298] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1297.283944] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1360.250746] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1423.308349] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1486.313943] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1549.320503] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1612.273476] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1675.284998] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1738.287026] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1801.289523] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1864.305506] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1927.308726] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 1990.331920] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2053.369569] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2116.356536] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2179.351098] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2242.387808] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2305.394275] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2368.352140] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2431.377119] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2494.364722] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2557.418193] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2620.405643] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2683.391507] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2746.381765] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2809.428465] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2872.449005] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2935.401286] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 2998.413024] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3061.419566] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3124.422182] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3157.153224] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 3157.153241] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 3157.153256] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
    [ 3187.421380] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3250.480577] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3313.438714] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3376.459731] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3439.459824] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3502.456087] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3565.516302] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3628.510051] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3691.510869] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3754.517440] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3817.515709] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3880.528498] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 3943.496873] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 4006.532798] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 4069.540523] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 4132.517475] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    [ 4146.420573] perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    [ 4183.760283] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
    /sbin/lspci -nnk | grep -iA2 net
    Code:
    [...LAN-Controller...]
    03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
            Subsystem: Hewlett-Packard Company Device [103c:145c]
            Kernel driver in use: wl
    zypper se broadcom
    Code:
    S | Name                              | Zusammenfassung                                       | Typ      
    --+-----------------------------------+-------------------------------------------------------+-----------
    i | broadcom-wl                       | Wireless driver for Broadcom 43xx series of chips     | Paket    
      | broadcom-wl                       | Wireless driver for Broadcom 43xx series of chips     | Quellpaket
      | broadcom-wl-debugsource           | Debug sources for package broadcom-wl                 | Paket    
      | broadcom-wl-kmp-default           | Wireless driver for Broadcom 43xx series of chips     | Paket    
      | broadcom-wl-kmp-default-debuginfo | Debug information for package broadcom-wl-kmp-default | Paket    
    i | broadcom-wl-kmp-desktop           | Wireless driver for Broadcom 43xx series of chips     | Paket    
      | broadcom-wl-kmp-desktop-debuginfo | Debug information for package broadcom-wl-kmp-desktop | Paket    
      | broadcom-wl-kmp-pae               | Wireless driver for Broadcom 43xx series of chips     | Paket    
      | broadcom-wl-kmp-pae-debuginfo     | Debug information for package broadcom-wl-kmp-pae     | Paket    
      | broadcom-wl-kmp-xen               | Wireless driver for Broadcom 43xx series of chips     | Paket    
      | broadcom-wl-kmp-xen-debuginfo     | Debug information for package broadcom-wl-kmp-xen     | Paket
    zypper se b43

    Code:
    S | Name               | Zusammenfassung                                                          | Typ      
    --+--------------------+--------------------------------------------------------------------------+-----------
    i | b43-firmware       | Firmware files for Broadcom bcm43xx series based PCI/PCMCIA cards        | Paket    
      | b43-firmware       | Firmware files for Broadcom bcm43xx series based PCI/PCMCIA cards        | Quellpaket
    i | b43-fwcutter       | Werkzeug zum extrahieren der Firmware von neueren Broadcom WLAN-Treibern | Paket    
      | b43-fwcutter       | Werkzeug zum extrahieren der Firmware von neueren Broadcom WLAN-Treibern | Quellpaket
    i | b43-openfwwf       | Open Source firmware for Broadcom/AirForce chipset based devices         | Paket    
      | b43-openfwwf       | Open Source firmware for Broadcom/AirForce chipset based devices         | Quellpaket
    i | b43-tools          | Tools for the Broadcom 43xx series WLAN chip                             | Paket    
      | b43-tools          | Tools for the Broadcom 43xx series WLAN chip                             | Quellpaket
    i | b43legacy-firmware | Legacy Firmware for Broadcom bcm43xx series based PCI/PCMCIA cards       | Paket    
      | b43legacy-firmware | Legacy Firmware for Broadcom bcm43xx series based PCI/PCMCIA cards       | Quellpaket
    Viele Grüße,

    highTower

  2. #2
    Join Date
    Jan 2013
    Location
    Germany
    Posts
    289

    Default Re: Problem mit Broadcom BCM4313 802.11bgn WLAN Adapter

    Probier mal den Treiber broadcom-wl aus dem Packman-Repository aus.

  3. #3
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,444

    Default AW: Problem mit Broadcom BCM4313 802.11bgn WLAN Adapter

    Code:
    uname -a
    sagt was?


    @AdaLovelace
    Der Broadcom-wl Treiber aus Packman läuft anscheinend.
    Kernel driver in use: wl

  4. #4

    Exclamation Re: Problem mit Broadcom BCM4313 802.11bgn WLAN Adapter

    Hi,

    ja genau, wenn ich das richtig interpretiere ist der broadcom-wl Treiber aus dem Packman repository in Betrieb.

    uname -a:

    Code:
    Linux pc-xx.yyyy.zz 3.16.7-7-desktop #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a) x86_64 x86_64 x86_64 GNU/Linux
    Vielen Dank,

    WebCD

  5. #5
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    3,444

    Default AW: Problem mit Broadcom BCM4313 802.11bgn WLAN Adapter

    Versuch einmal, umzustellen auf wicked (ifup) , lösche die Netzwerkkarten und stelle auf Netzwerkmanager zurück:
    http://www.linupedia.org/opensuse/Um...NetworkManager

    Ansonsten einmal ohne Broadcom-wl versuchen:
    http://www.linupedia.org/opensuse/Broadcom_Wireless

    Poste bitte auch noch einmal (Das ist eine andere Ausgabe, als Du gepostet hast):
    Code:
    zypper se -si broadcom
    Code:
    zypper lr -uP

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •