I have been using this great application, simple screen recorder, for a
about a year now, and it has always worked very easily. I have tried
recorditnow and recordmydesktop, but I cannot get the sound to work on
those, so I was using simple screen recorder. The sound part is very
easy, you just set it to pulseaudio as the back end and the source as
"monitor of built in audio analog stero".

It was working fine for months, and then I didn't use it for about a
month, and have done a few updates, and now it won't work. When I set it
up and finally hit the record button, it just shuts down. Here is the
error that comes through:

Code:
simplescreenrecorder
==================== SSR started ====================
SimpleScreenRecorder 0.3.1
Compiled with GCC 4.8.1
Qt: header 4.8.5, lib 4.8.5
libavformat: header 55.48.100, lib 55.19.104
libavcodec: header 55.69.100, lib 55.39.101
libavutil: header 52.92.100, lib 52.48.101
libswscale: header 2.6.100, lib 2.5.101
[ALSAInput::GetSourceList] Generating source list ...
[ALSAInput::GetSourceList] Found card: [hw:0] HDA Intel PCH
[ALSAInput::GetSourceList] Found device: [hw:0,0] HDA Intel PCH:
ALC269VB Analog
[PulseAudioInput::GetSourceList] Generating source list ...
[SourceNamesCallback] Found source:
[alsa_output.pci-0000_00_1b.0.analog-stereo.monitor] Monitor of Built-in
Audio Analog Stereo
[SourceNamesCallback] Found source:
[alsa_input.pci-0000_00_1b.0.analog-stereo] Built-in Audio Analog Stereo
[DetectCPUFeatures] CPU features: mmx sse sse2 sse3 ssse3 sse4_1 sse4_2 avx
[PageRecord::StartPage] Starting page ...
[PageRecord::StartPage] Started page.
[PageRecord::StartOutput] Starting output ...
[Muxer::Init] Using format matroska (Matroska).
[Muxer::AddStream] Using codec libx264 (libx264 H.264 / AVC / MPEG-4 AVC
/ MPEG-4 part 10).
[libx264 @ 0x2130620] using SAR=1/1
[libx264 @ 0x2130620] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
[libx264 @ 0x2130620] profile High, level 3.2
[libx264 @ 0x2130620] 264 - core 135 - H.264/MPEG-4 AVC codec - Copyleft
2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=1
deblock=1:0:0 analyse=0x3:0x3 me=dia subme=1 psy=1 psy_rd=1.00:0.00
mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=1 cqm=0
deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=4
lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0
bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1
b_bias=0 direct=1 weightb=1 open_gop=0 weightp=1 keyint=250
keyint_min=25 scenecut=40 intra_refresh=0 rc=crf mbtree=0 crf=23.0
qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 pb_ratio=1.30 aq=1:1.00
[Muxer::AddStream] Using codec libvorbis (libvorbis).
[BaseEncoder::EncoderThread] Encoder thread started.
[BaseEncoder::EncoderThread] Encoder thread started.
[DetectCPUFeatures] CPU features: mmx sse sse2 sse3 ssse3 sse4_1 sse4_2 avx
[DetectCPUFeatures] CPU features: mmx sse sse2 sse3 ssse3 sse4_1 sse4_2 avx
[Muxer::MuxerThread] Muxer thread started.
[PageRecord::StartOutput] Started output.
[Synchronizer::SynchronizerThread] Synchronizer thread started.
[PageRecord::StartInput] Starting input ...
[X11Input::Init] Using X11 shared memory.
[X11Input::InputThread] Input thread started.
[PageRecord::StartInput] Started input.
[PulseAudioInput::InputThread] Input thread started.
[FastResampler::Resample] Resample ratio is 1.0000 (was 0.0000).
Segmentation fault
george@tribetreklap:~>
It is that last part, "segmentation fault", where it just shuts down. I
got the application from packman.

The dependencies listed in yast for this package are:
Code:
libc.so.6()(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.4)(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libpthread.so.0()(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libpthread.so.0(GLIBC_2.2.5)(64bit)
libm.so.6()(64bit)
libm.so.6(GLIBC_2.2.5)(64bit)
libstdc++.so.6()(64bit)
libstdc++.so.6(GLIBCXX_3.4)(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libstdc++.so.6(GLIBCXX_3.4.9)(64bit)
libstdc++.so.6(GLIBCXX_3.4.11)(64bit)
libX11.so.6()(64bit)
libQtCore.so.4()(64bit)
libQtGui.so.4()(64bit)
libasound.so.2()(64bit)
libasound.so.2(ALSA_0.9)(64bit)
libavutil.so.52()(64bit)
libavutil.so.52(LIBAVUTIL_52)(64bit)
libasound.so.2(ALSA_0.9.0rc4)(64bit)
libavcodec.so.55()(64bit)
libavcodec.so.55(LIBAVCODEC_55)(64bit)
libjack.so.0()(64bit)
libavformat.so.55()(64bit)
libavformat.so.55(LIBAVFORMAT_55)(64bit)
/bin/bash
librt.so.1()(64bit)
libXext.so.6()(64bit)
librt.so.1(GLIBC_2.2.5)(64bit)
libswscale.so.2()(64bit)
libswscale.so.2(LIBSWSCALE_2)(64bit)
libpulse.so.0()(64bit)
libpulse.so.0(PULSE_0)(64bit)
libXfixes.so.3()(64bit)
libc.so.6(GLIBC_2.9)(64bit)
libXi.so.6()(64bit)
libstdc++.so.6(GLIBCXX_3.4.17)(64bit)
/bin/sh
I don't know very much about video recording, so I don't know what else
to put down here.

What else do I need to try and troubleshoot and make this work? Should I
contact the developer?

Thanks for any help you may be able to provide. I need to get this
application working again.

--
G.O.
Box #1: 13.1 | KDE 4.12 | AMD Phenom IIX4 | 64 | 16GB
Box #2: 13.1 | KDE 4.12 | AMD Athlon X3 | 64 | 4GB
Laptop: 13.1 | KDE 4.12 | Core i7-2620M | 64 | 8GB