Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Dr. Racket crashes on launch

  1. #1
    Join Date
    Nov 2013
    Location
    Canadiana
    Posts
    461

    Default Dr. Racket crashes on launch

    As the title says, Dr. Racket crashes whenever I try to launch it and I get the following errors. I cannot seem to figure out what is wrong, it crashes regardless of nvidia or nouveau driers.
    Direct rendering works (confimed via glxinfo | grep direct).
    Currently using nvidia drivers on (new) Tumbleweed.

    Code:
    gum:~/ $ drracket 
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    NETWM: Warning readIcon() needs buffer adjustment!
    The program 'drracket' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadMatch (invalid parameter attributes)'.
      (Details: serial 5517 error_code 8 request_code 70 minor_code 0)
      (Note to programmers: normally, X errors are reported asynchronously;
       that is, you will receive the error a while after causing it.
       To debug your program, run it with the --sync command line
       option to change this behavior. You can then get a meaningful
       backtrace from your debugger if you break on the gdk_x_error() function.)

    Any help would be appreciated.
    openSUSE Leap (42.1) 64 bit
    Plasma 5.4

  2. #2
    Join Date
    Nov 2013
    Location
    Canadiana
    Posts
    461

    Default Re: Dr. Racket crashes on launch

    I seem to also get this error in GIMP when I use the text tool. Any clues as to what is causing this? It is very annoying...

    Code:
    gum:~/ $ gimp
    GEGL-geglmodule.c-Message: Module '/usr/lib64/gegl-0.2/matting-levin.so' load error: libblas.so.3: cannot open shared object file: No such file or directory
    The program 'gimp' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadWindow (invalid Window parameter)'.
    (Details: serial 11838 error_code 3 request_code 1 minor_code 0)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the --sync command line
    option to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error() function.)
    
    (script-fu:7488): LibGimpBase-WARNING **: script-fu: gimp_wire_read(): error
    --
    openSUSE Factory 64 bit
    KDE 4.14.1

  3. #3
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Dr. Racket crashes on launch

    Graphics card? driver?

    oops missed that in first post.

    In that case Tumbelweed... Probably need to report it Also should go to the tumbleweed thread

  4. #4
    Join Date
    Nov 2013
    Location
    Canadiana
    Posts
    461

    Default Re: Dr. Racket crashes on launch

    Quote Originally Posted by gogalthorp View Post
    Graphics card? driver?

    oops missed that in first post.

    In that case Tumbelweed... Probably need to report it Also should go to the tumbleweed thread
    Did a fresh install of 13.1, still get this issue. Using nouveau drivers, the card is a 560Ti. Here are my repos.

    Code:
    gum:~/ $ lr
    #  | Alias                     | Name                               | Enabled | Refresh
    ---+---------------------------+------------------------------------+---------+--------
     1 | KDE:Extra                 | KDE:Extra                          | Yes     | Yes    
     2 | KDE:Unstable:SC           | KDE:Unstable:SC                    | Yes     | Yes    
     3 | devel:languages:python    | devel:languages:python             | Yes     | Yes    
     4 | home:malcolmlewis:TESTING | home:malcolmlewis:TESTING          | Yes     | Yes    
     5 | libdvdcss                 | libdvdcss                          | Yes     | Yes    
     6 | openSUSE-13.1-1.10        | openSUSE-13.1-1.10                 | No      | Yes    
     7 | packman                   | packman                            | Yes     | Yes    
     8 | repo-debug                | openSUSE-13.1-Debug                | No      | Yes    
     9 | repo-debug-update         | openSUSE-13.1-Update-Debug         | No      | Yes    
    10 | repo-debug-update-non-oss | openSUSE-13.1-Update-Debug-Non-Oss | No      | Yes    
    11 | repo-non-oss              | openSUSE-13.1-Non-Oss              | Yes     | Yes    
    12 | repo-oss                  | openSUSE-13.1-Oss                  | Yes     | Yes    
    13 | repo-source               | openSUSE-13.1-Source               | No      | Yes    
    14 | repo-update               | openSUSE-13.1-Update               | Yes     | Yes    
    15 | repo-update-non-oss       | openSUSE-13.1-Update-Non-Oss       | Yes     | Yes
    Any ideas?
    openSUSE Leap (42.1) 64 bit
    Plasma 5.4

  5. #5
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Dr. Racket crashes on launch

    Yes report in the Tumbleweed thread. I suspect it is tumbleweed issue. But If you have gone back to vanilla 13.1 ???

    But then again you may need to run the NVIDIA driver. Also you may want to try a different user to see if it is a desktop config problem

    Note that moving backwards can cause confusion in conifg files. Programs can in general move forward but don't know how to set configs back

  6. #6
    Join Date
    Nov 2013
    Location
    Canadiana
    Posts
    461

    Default Re: Dr. Racket crashes on launch

    Quote Originally Posted by gogalthorp View Post
    But then again you may need to run the NVIDIA driver. Also you may want to try a different user to see if it is a desktop config problem

    Note that moving backwards can cause confusion in conifg files. Programs can in general move forward but don't know how to set configs back
    You might be right but that is unlikely because I have never use Dr Racket before. Still, will at least check out the possibility.
    openSUSE Leap (42.1) 64 bit
    Plasma 5.4

  7. #7
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Dr. Racket crashes on launch

    OK assuming you are using the same home then going to Tumbleweed may change some config files for your desktop. Going back the applications don't know how to deal with the changes. Goint to a new user account will show if this is a problem or not.

  8. #8
    Join Date
    Nov 2013
    Location
    Canadiana
    Posts
    461

    Default Re: Dr. Racket crashes on launch

    Quote Originally Posted by gogalthorp View Post
    OK assuming you are using the same home then going to Tumbleweed may change some config files for your desktop. Going back the applications don't know how to deal with the changes. Goint to a new user account will show if this is a problem or not.
    Okay so it works on a new user . I tried clearing my .kde folders and using fresh ones but that did not resolve the issue. Any idea what other files/folders in ~ could be causing this? Keep in mind its not just an issue with drracket so it must be something that several programs access.
    openSUSE Leap (42.1) 64 bit
    Plasma 5.4

  9. #9
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,650

    Default Re: Dr. Racket crashes on launch

    Not sure but I think that at least some configs for KDE now are in the ~/.config folder.

  10. #10
    Join Date
    Nov 2013
    Location
    Canadiana
    Posts
    461

    Default Re: Dr. Racket crashes on launch

    On 11/12/2014 05:56 PM, gogalthorp wrote:
    >
    > Not sure but I think that at least some configs for KDE now are in the
    > ~/.config folder.
    >
    >


    Moved .config and now the issue is resolved. Thanks a lot, I will
    remember in the future that this folder is used!

    --
    openSUSE Factory 64 bit
    KDE 4.14.1

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •