Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Upgrade to 13.2 Milestone 0 causes boot failure

  1. #1

    Default Upgrade to 13.2 Milestone 0 causes boot failure

    I upgraded my 64bit Opensuse 13.1 machine using zypper up and it no longer boots. I have tried the advanced option from grub and it fails to boot after printing:
    Reached target sound card
    [TIME] Timed out waiting for device .......Part4_Dev
    Dependency failed for /home

    Any ideas???

    fstab contains:

    Code:
    /dev/disk/by-id/ata-HDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL-part2    swap    swap    defaults 0 0 
    /dev/disk/by-id/ata-HDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL-part3    /    ext4    acl,user_xattr 1 1 
    /dev/disk/by-id/ata-HDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL-part1    /boot/efi    vfat    umask=0002,utf8=true 0 0 
    /dev/disk/by-id/ata-HDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL-part4    /home    ext4    acl,user_xattr 1 2 
    proc    /proc    proc    defaults 0 0 
    sysfs    /sys    sysfs    noauto 0 0 
    debugfs    /sys/kernel/debug    debugfs    noauto 0 0 
    usbfs    /proc/bus/usb    usbfs    noauto 0 0 
    devpts    /dev/pts    devpts    mode=0620,gid=5 0 0 
    192.168.0.101:/home/benbowc/NFSShare    /mnt/NFSShare    nfs4    defaults 0 0

  2. #2
    Join Date
    Jun 2008
    Location
    UK
    Posts
    5,500

    Default Re: Upgrade to 13.2 Milestone 0 causes boot failure

    Click the triangular report button below the post and request a moderator to move the thread to the Pre-release/Beta forum, where it belongs.
    Leap 42.3 (ext4, KDE Plasma 5.8.7) ~ stable
    Manjaro (ext4, Xfce) ~ rolling updates
    Tumbleweed (ext4, KDE Plasma5) ~ managed updates via "Tumbleweed Snapshots" service.

  3. #3

    Default Can't boot 13.2

    Heres the boot log

    Code:
     [  OK  ] Found device HDS721025CLA382.[  OK  ] Found device HDS721025CLA382.
    [  OK  ] Found device HDS721025CLA382.
    [  OK  ] Started dracut initqueue hook.
             Mounting /sysroot...
    [  OK  ] Reached target Remote File Systems (Pre).
    [  OK  ] Mounted /sysroot.
    [  OK  ] Reached target Initrd Root File System.
             Starting Reload Configuration from the Real Root...
    [  OK  ] Started Reload Configuration from the Real Root.
    [  OK  ] Reached target Initrd File Systems.
    [  OK  ] Started Show Plymouth Boot Screen.
    [  OK  ] Reached target Paths.
    [  OK  ] Reached target Basic System.
    [  OK  ] Reached target Initrd Default Target.
    
    
    Welcome to openSUSE 13.2 Milestone 0 (Harlequin) (x86_64)!
    
    
    [  OK  ] Stopped Switch Root.
    [  OK  ] Stopped target Switch Root.
    [  OK  ] Stopped target Initrd File Systems.
    [  OK  ] Stopped target Initrd Root File System.
             Starting Replay Read-Ahead Data...
             Starting Collect Read-Ahead Data...
    [  OK  ] Created slice User and Session Slice.
    [  OK  ] Created slice system-getty.slice.
    [  OK  ] Listening on Syslog Socket.
             Starting Create dynamic rule for /dev/root link...
    [  OK  ] Reached target Slices.
    [  OK  ] Listening on Delayed Shutdown Socket.
    [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
             Starting LSB: Set default boot entry if called...
    [  OK  ] Set up automount Arbitrary Executable File Formats File System Automount Point.
             Mounting POSIX Message Queue File System...
             Mounting Huge Pages File System...
    [  OK  ] Reached target Encrypted Volumes.
    [  OK  ] Listening on udev Kernel Socket.
    [  OK  ] Listening on udev Control Socket.
             Starting udev Coldplug all Devices...
             Starting Create list of required static device nodes for the current kernel...
             Expecting device dev-disk-by\x2did-ata\x2dHDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL\x2dpart2.device...
             Expecting device dev-disk-by\x2did-ata\x2dHDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL\x2dpart1.device...
             Expecting device dev-disk-by\x2did-ata\x2dHDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL\x2dpart4.device...
    [  OK  ] Stopped Trigger Flushing of Journal to Persistent Storage.
             Stopping Journal Service...
    [  OK  ] Stopped Journal Service.
             Starting Journal Service...
    [  OK  ] Started Journal Service.
    [  OK  ] Started Collect Read-Ahead Data.
    [  OK  ] Started udev Coldplug all Devices.
    [  OK  ] Started Replay Read-Ahead Data.
             Starting Load Kernel Modules...
             Starting File System Check on Root Device...
    [  OK  ] Mounted POSIX Message Queue File System.
    [  OK  ] Mounted Huge Pages File System.
    [  OK  ] Started Create list of required static device nodes for the current kernel.
             Starting Create static device nodes in /dev...
    [  OK  ] Started Load Kernel Modules.
             Starting Apply Kernel Variables...
    [  OK  ] Started Apply Kernel Variables.
    systemd-fsck[403]: /dev/sda3: clean, 493237/4448736 files, 8423081/17760256 blocks
    [  OK  ] Started File System Check on Root Device.
             Starting Remount Root and Kernel File Systems...
    [  OK  ] Started Create dynamic rule for /dev/root link.
    [  OK  ] Started LSB: Set default boot entry if called.
    [  OK  ] Started Create static device nodes in /dev.
    [  OK  ] Started Remount Root and Kernel File Systems.
             Starting Load/Save Random Seed...
             Starting udev Kernel Device Manager...
    [  OK  ] Reached target Local File Systems (Pre).
             Mounting Runtime Directory...
             Mounting /sys/kernel/debug...
             Mounting Lock Directory...
    [  OK  ] Started udev Kernel Device Manager.
    [  OK  ] Mounted Runtime Directory.
    [  OK  ] Started Load/Save Random Seed.
    [  OK  ] Mounted /sys/kernel/debug.
    [  OK  ] Mounted Lock Directory.
    [  OK  ] Reached target Sound Card.
    [ TIME ] Timed out waiting for device dev-disk-by\x2did-ata\x2dHDS721025CLA382_39M4511_42C0463IBM_JPA270H82P24EL\x2dpart4.device.
    [DEPEND] Dependency failed for /home.
    [DEPEND] Dependency failed for Local File Systems.
    Welcome to emergency mode! After logging in, type "journalctl -xb" to view
    system logs, "systemctl reboot" to reboot, "systemctl default" to try again
    to boot into default mode.
    Welcome to emergency mode! After logging in, type "journalctl -xb" to view
    system logs, "systemctl reboot" to reboot, "systemctl default" to try again
    to boot into default mode.
    Any ideas anyone?

    How do I back out of this update? I didn't realise the update would result in 13.2 being installed. My bad but I need this machine running again......

    Craig

  4. #4
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    15,664
    Blog Entries
    3

    Default Re: Can't boot 13.2

    Quote Originally Posted by benbowc View Post
    How do I back out of this update? I didn't realise the update would result in 13.2 being installed. My bad but I need this machine running again......

    Craig
    It is probably easier to just install 13.1. Or update to 13.1 with the DVD.
    openSUSE Leap 15.3; KDE Plasma 5.18.6;

  5. #5
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    29,726

    Default Re: Upgrade to 13.2 Milestone 0 causes boot failure

    Will be moved and is CLOSED for the moment.
    Henk van Velden

  6. #6
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    29,726

    Default Re: Upgrade to 13.2 Milestone 0 causes boot failure

    Quote Originally Posted by hcvv View Post
    Will be moved and is CLOSED for the moment.
    The thread is now merged with another obout about the same subject.

    Well, I assume it is the same subject.

    Please do not double post and do not make such a mess out of your questions.
    Last edited by hcvv; 22-May-2014 at 11:20.
    Henk van Velden

  7. #7
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: Upgrade to 13.2 Milestone 0 causes boot failure

    On 2014-05-22 18:16, hcvv wrote:
    >
    > hcvv;2644771 Wrote:
    >> Will be moved and is CLOSED for the moment.

    >
    > The thread is now merged with another obe about the same subject.


    Please, which is the other one? I tried to locate it and could not find
    it (I looked for the from field). If I answer unknowingly on it, via
    nntp, I'll make another mess...

    --
    Cheers / Saludos,

    Carlos E. R.

    (from 13.1 x86_64 "Bottle" (Minas Tirith))

  8. #8
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    15,664
    Blog Entries
    3

    Default Re: Upgrade to 13.2 Milestone 0 causes boot failure

    Quote Originally Posted by robin_listas View Post
    Please, which is the other one? I tried to locate it and could not find
    it (I looked for the from field).
    Looking at it on the web forum:

    The first two messages were from one original thread. The third and fourth are from another thread. Most of the remainder were probably posted to the merged thread. The title (or "Subject:" line) of the 3rd and 4th messages gives the title of the other thread, which was "Can't boot 13.2".
    openSUSE Leap 15.3; KDE Plasma 5.18.6;

  9. #9

    Default Re: Can't boot 13.2

    On 05/22/2014 09:46 AM, nrickert pecked at the keyboard and wrote:
    > benbowc;2644745 Wrote:
    >> How do I back out of this update? I didn't realise the update would
    >> result in 13.2 being installed. My bad but I need this machine running
    >> again......
    >>
    >> Craig

    > It is probably easier to just install 13.1. Or update to 13.1 with the
    > DVD.
    >
    >


    Or change all of your repos to only use 13.1 and issue zypper dup and
    let it do it's thing.

    Ken

  10. #10

    Default Re: Can't boot 13.2

    Quote Originally Posted by kensch View Post
    On 05/22/2014 09:46 AM, nrickert pecked at the keyboard and wrote:
    > benbowc;2644745 Wrote:
    >> How do I back out of this update? I didn't realise the update would
    >> result in 13.2 being installed. My bad but I need this machine running
    >> again......
    >>
    >> Craig

    > It is probably easier to just install 13.1. Or update to 13.1 with the
    > DVD.
    >
    >


    Or change all of your repos to only use 13.1 and issue zypper dup and
    let it do it's thing.

    Ken
    Sorry for the mess of messages....I'll try to be tidier

    I tried doing a reinstall and it failed with problems in creating initrd.... I'm going to nuke it and start over. Would like to know however if others are able to get 13.2 installed and running.

    Craig

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •