Results 1 to 10 of 10

Thread: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

  1. #1

    Default From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    Dedicated server with OpenSUSE13.1 only for Samba:
    Code:
    srvbcp02:/etc # rpm -qa | grep -i samba
    samba-winbind-4.1.6-3.18.1.i586
    samba-client-4.1.6-3.18.1.i586
    libsamba-util0-4.1.6-3.18.1.i586
    libsamba-credentials0-4.1.6-3.18.1.i586
    yast2-samba-client-3.0.1-3.1.noarch
    libsamba-hostconfig0-4.1.6-3.18.1.i586
    yast2-samba-server-3.0.2-2.1.4.noarch
    samba-libs-4.1.6-3.18.1.i586
    samba-4.1.6-3.18.1.i586
    Server have dedicated SATA drive (/dev/sda1 ) for Samba Share.
    This is Write speed to this /dev/sda1:
    [CODE]srvbcp02:/srv/bcp/vol01 # LANG=en_US.UTF-8 dd if=/dev/zero of=test.tmp bs=500K count=1024
    1024+0 records in
    1024+0 records out
    524288000 bytes (524 MB) copied, 3.93527 s, 133 MB/s
    srvbcp02:/srv/bcp/vol01 #
    /CODE]


    When copy from my XPSP3 to the SAMBASHARE have speed only: <=9000Kb/s

    Server with Samba have 1GLanNIC.
    XPSP3 Have 100MbLanNic

    Please, help me

    Serg

  2. #2
    Join Date
    Nov 2009
    Location
    ND, USA
    Posts
    1,131

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    On 5/12/2014 7:56 AM, skoltogyan wrote:
    >
    > Dedicated server with OpenSUSE13.1 only for Samba:
    >
    > Code:
    > --------------------
    > srvbcp02:/etc # rpm -qa | grep -i samba
    > samba-winbind-4.1.6-3.18.1.i586
    > samba-client-4.1.6-3.18.1.i586
    > libsamba-util0-4.1.6-3.18.1.i586
    > libsamba-credentials0-4.1.6-3.18.1.i586
    > yast2-samba-client-3.0.1-3.1.noarch
    > libsamba-hostconfig0-4.1.6-3.18.1.i586
    > yast2-samba-server-3.0.2-2.1.4.noarch
    > samba-libs-4.1.6-3.18.1.i586
    > samba-4.1.6-3.18.1.i586
    > --------------------
    >
    >
    > Server have dedicated SATA drive (/dev/sda1 ) for Samba Share.
    > This is Write speed to this /dev/sda1:
    >
    > Code:
    > --------------------
    > srvbcp02:/srv/bcp/vol01 # LANG=en_US.UTF-8 dd if=/dev/zero of=test.tmp bs=500K count=1024
    > 1024+0 records in
    > 1024+0 records out
    > 524288000 bytes (524 MB) copied, 3.93527 s, 133 MB/s
    > srvbcp02:/srv/bcp/vol01 #
    > /CODE]
    >
    >
    > When copy from my XPSP3 to the SAMBASHARE have speed only: <=9000Kb/s
    >
    > Server with Samba have 1GLanNIC.
    > XPSP3 Have 100MbLanNic
    >
    > Please, help me
    >
    > Serg
    >
    >

    Serg;

    Can you post the contents of /etc/samba/smb.conf? It may shed some light on the problem.

    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green

  3. #3

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    Quote Originally Posted by venzkep View Post
    On 5/12/2014 7:56 AM, skoltogyan wrote:
    >
    > Dedicated server with OpenSUSE13.1 only for Samba:
    >
    > Code:
    > --------------------
    > srvbcp02:/etc # rpm -qa | grep -i samba
    > samba-winbind-4.1.6-3.18.1.i586
    > samba-client-4.1.6-3.18.1.i586
    > libsamba-util0-4.1.6-3.18.1.i586
    > libsamba-credentials0-4.1.6-3.18.1.i586
    > yast2-samba-client-3.0.1-3.1.noarch
    > libsamba-hostconfig0-4.1.6-3.18.1.i586
    > yast2-samba-server-3.0.2-2.1.4.noarch
    > samba-libs-4.1.6-3.18.1.i586
    > samba-4.1.6-3.18.1.i586
    > --------------------
    >
    >
    > Server have dedicated SATA drive (/dev/sda1 ) for Samba Share.
    > This is Write speed to this /dev/sda1:
    >
    > Code:
    > --------------------
    > srvbcp02:/srv/bcp/vol01 # LANG=en_US.UTF-8 dd if=/dev/zero of=test.tmp bs=500K count=1024
    > 1024+0 records in
    > 1024+0 records out
    > 524288000 bytes (524 MB) copied, 3.93527 s, 133 MB/s
    > srvbcp02:/srv/bcp/vol01 #
    > /CODE]
    >
    >
    > When copy from my XPSP3 to the SAMBASHARE have speed only: <=9000Kb/s
    >
    > Server with Samba have 1GLanNIC.
    > XPSP3 Have 100MbLanNic
    >
    > Please, help me
    >
    > Serg
    >
    >

    Serg;

    Can you post the contents of /etc/samba/smb.conf? It may shed some light on the problem.

    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green
    This is smb.conf
    Code:
    srvbcp02:~ # cat /etc/samba/smb.conf# smb.conf is the main Samba configuration file. You find a full commented
    # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
    # samba-doc package is installed.
    [global]
    	workgroup = WORKGROUP
    	passdb backend = tdbsam
    	printing = cups
    	printcap name = cups
    	printcap cache time = 750
    	cups options = raw
    	map to guest = Bad User
    	usershare allow guests = No
    	include = /etc/samba/dhcp.conf
    	logon path = \\%L\profiles\.msprofile
    	logon home = \\%L\%U\.9xprofile
    	logon drive = P:
    	add machine script = /usr/sbin/useradd  -c Machine -d /var/lib/nobody -s /bin/false %m$
    	domain logons = No
    	domain master = No
    #	netbios name = srvbcp02
    	security = user
    	wins support = No
    	log level = 0
    	debug level = 0
    
    
    
    
    
    
    read raw = yes
    write raw = yes
    wide links=yes
    getwd cache=yes
    stat cache = yes
    strict sync = no
    use sendfile = yes
    large readwrite = yes
    oplock contention limit = 5
    oplock break wait time = 100
    case sensitive = true
    strict allocate = yes
    max xmit = 131072
    use sendfile = Yes
    dead time = 15
    getwd cache = Yes
    
    
    disable netbios = yes
    nmbd bind explicit broadcast = no
    netbios name = srvbcp02
    
    
    min receivefile size = 43638
    aio read size = 643638
    aio write size = 643638
    aio write behind = false
    
    
    ##Optimize tcp
    socket options = TCP_NODELAY SO_RCVBUF=262144 SO_SNDBUF=262144 IPTOS_LOWDELAY SO_KEEPALIVE
    
    
    socket options = SO_KEEPALIVE SO_REUSEADDR \
       SO_BROADCAST TCP_NODELAY IPTOS_LOWDELAY \
          IPTOS_THROUGHPUT SO_SNDBUF=262144 SO_RCVBUF=262144
    
    
    write cache size = 12826144
    strict allocate = yes
    
    
    
    
    [srvbcp02]
    	comment = Server BCP02
    	inherit acls = Yes
    	path = /srv/bcp/vol01
    	read only = No
    	guest ok = Yes
    	hosts allow = 172.16.16.250, 172.16.16.254, 172.16.16.176, 172.16.0.112, 172.17.32.22, 172.16.16.189
    	
    srvbcp02:~ #

  4. #4
    Join Date
    Nov 2009
    Location
    ND, USA
    Posts
    1,131

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    On 5/12/2014 10:46 PM, skoltogyan wrote:
    >
    > venzkep;2642876 Wrote:
    >> On 5/12/2014 7:56 AM, skoltogyan wrote:
    >>>
    >>> Dedicated server with OpenSUSE13.1 only for Samba:
    >>>
    >>> Code:
    >>> --------------------
    >>> srvbcp02:/etc # rpm -qa | grep -i samba
    >>> samba-winbind-4.1.6-3.18.1.i586
    >>> samba-client-4.1.6-3.18.1.i586
    >>> libsamba-util0-4.1.6-3.18.1.i586
    >>> libsamba-credentials0-4.1.6-3.18.1.i586
    >>> yast2-samba-client-3.0.1-3.1.noarch
    >>> libsamba-hostconfig0-4.1.6-3.18.1.i586
    >>> yast2-samba-server-3.0.2-2.1.4.noarch
    >>> samba-libs-4.1.6-3.18.1.i586
    >>> samba-4.1.6-3.18.1.i586
    >>> --------------------
    >>>
    >>>
    >>> Server have dedicated SATA drive (/dev/sda1 ) for Samba Share.
    >>> This is Write speed to this /dev/sda1:
    >>>
    >>> Code:
    >>> --------------------
    >>> srvbcp02:/srv/bcp/vol01 # LANG=en_US.UTF-8 dd if=/dev/zero

    >> of=test.tmp bs=500K count=1024
    >>> 1024+0 records in
    >>> 1024+0 records out
    >>> 524288000 bytes (524 MB) copied, 3.93527 s, 133 MB/s
    >>> srvbcp02:/srv/bcp/vol01 #
    >>> /CODE]
    >>>
    >>>
    >>> When copy from my XPSP3 to the SAMBASHARE have speed only:

    >> <=9000Kb/s
    >>>
    >>> Server with Samba have 1GLanNIC.
    >>> XPSP3 Have 100MbLanNic
    >>>
    >>> Please, help me
    >>>
    >>> Serg
    >>>
    >>>

    >> Serg;
    >>
    >> Can you post the contents of /etc/samba/smb.conf? It may shed some
    >> light on the problem.
    >>
    >> --
    >> P.V.
    >> "We're all in this together, I'm pulling for you" Red Green

    >
    > This is smb.conf
    >
    > Code:
    > --------------------
    > srvbcp02:~ # cat /etc/samba/smb.conf# smb.conf is the main Samba configuration file. You find a full commented
    > # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
    > # samba-doc package is installed.
    > [global]
    > workgroup = WORKGROUP
    > passdb backend = tdbsam
    > printing = cups
    > printcap name = cups
    > printcap cache time = 750
    > cups options = raw
    > map to guest = Bad User
    > usershare allow guests = No
    > include = /etc/samba/dhcp.conf
    > logon path = \\%L\profiles\.msprofile
    > logon home = \\%L\%U\.9xprofile
    > logon drive = P:
    > add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$
    > domain logons = No
    > domain master = No
    > # netbios name = srvbcp02
    > security = user
    > wins support = No
    > log level = 0
    > debug level = 0
    >
    >
    >
    >
    >
    >
    > read raw = yes
    > write raw = yes
    > wide links=yes
    > getwd cache=yes
    > stat cache = yes
    > strict sync = no
    > use sendfile = yes
    > large readwrite = yes
    > oplock contention limit = 5
    > oplock break wait time = 100
    > case sensitive = true
    > strict allocate = yes
    > max xmit = 131072
    > use sendfile = Yes
    > dead time = 15
    > getwd cache = Yes
    >
    >
    > disable netbios = yes
    > nmbd bind explicit broadcast = no
    > netbios name = srvbcp02
    >
    >
    > min receivefile size = 43638
    > aio read size = 643638
    > aio write size = 643638
    > aio write behind = false
    >
    >
    > ##Optimize tcp
    > socket options = TCP_NODELAY SO_RCVBUF=262144 SO_SNDBUF=262144 IPTOS_LOWDELAY SO_KEEPALIVE
    >
    >
    > socket options = SO_KEEPALIVE SO_REUSEADDR \
    > SO_BROADCAST TCP_NODELAY IPTOS_LOWDELAY \
    > IPTOS_THROUGHPUT SO_SNDBUF=262144 SO_RCVBUF=262144
    >
    >
    > write cache size = 12826144
    > strict allocate = yes
    >
    >
    >
    >
    > [srvbcp02]
    > comment = Server BCP02
    > inherit acls = Yes
    > path = /srv/bcp/vol01
    > read only = No
    > guest ok = Yes
    > hosts allow = 172.16.16.250, 172.16.16.254, 172.16.16.176, 172.16.0.112, 172.17.32.22, 172.16.16.189
    >
    > srvbcp02:~ #
    >
    >
    >
    > --------------------
    >
    >


    Serg;

    The socket options parameter is a historic relic and generally slows a modern kernel ( 2.6 or more). See for example
    any of these:

    http://lists.samba.org/archive/samba...ch/154326.html
    http://lists.samba.org/archive/samba...er/151709.html
    http://lists.samba.org/archive/samba...ch/139036.html

    I would suggest you comment out both of these. ( I suspect only the last one is used anyway, when two values are set for
    a parameter it is generally only the last which is used.)

    I would also suggest that you allow these to go to default values unless you have first tested.(comment them out):
    Code:
    min receivefile size
    aio read size
    aio write size
    aio write behind
    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green

  5. #5

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    Quote Originally Posted by venzkep View Post
    On 5/12/2014 10:46 PM, skoltogyan wrote:
    >
    > venzkep;2642876 Wrote:
    >> On 5/12/2014 7:56 AM, skoltogyan wrote:
    >>>
    >>> Dedicated server with OpenSUSE13.1 only for Samba:
    >>>
    >>> Code:
    >>> --------------------
    >>> srvbcp02:/etc # rpm -qa | grep -i samba
    >>> samba-winbind-4.1.6-3.18.1.i586
    >>> samba-client-4.1.6-3.18.1.i586
    >>> libsamba-util0-4.1.6-3.18.1.i586
    >>> libsamba-credentials0-4.1.6-3.18.1.i586
    >>> yast2-samba-client-3.0.1-3.1.noarch
    >>> libsamba-hostconfig0-4.1.6-3.18.1.i586
    >>> yast2-samba-server-3.0.2-2.1.4.noarch
    >>> samba-libs-4.1.6-3.18.1.i586
    >>> samba-4.1.6-3.18.1.i586
    >>> --------------------
    >>>
    >>>
    >>> Server have dedicated SATA drive (/dev/sda1 ) for Samba Share.
    >>> This is Write speed to this /dev/sda1:
    >>>
    >>> Code:
    >>> --------------------
    >>> srvbcp02:/srv/bcp/vol01 # LANG=en_US.UTF-8 dd if=/dev/zero

    >> of=test.tmp bs=500K count=1024
    >>> 1024+0 records in
    >>> 1024+0 records out
    >>> 524288000 bytes (524 MB) copied, 3.93527 s, 133 MB/s
    >>> srvbcp02:/srv/bcp/vol01 #
    >>> /CODE]
    >>>
    >>>
    >>> When copy from my XPSP3 to the SAMBASHARE have speed only:

    >> <=9000Kb/s
    >>>
    >>> Server with Samba have 1GLanNIC.
    >>> XPSP3 Have 100MbLanNic
    >>>
    >>> Please, help me
    >>>
    >>> Serg
    >>>
    >>>

    >> Serg;
    >>
    >> Can you post the contents of /etc/samba/smb.conf? It may shed some
    >> light on the problem.
    >>
    >> --
    >> P.V.
    >> "We're all in this together, I'm pulling for you" Red Green

    >
    > This is smb.conf
    >
    > Code:
    > --------------------
    > srvbcp02:~ # cat /etc/samba/smb.conf# smb.conf is the main Samba configuration file. You find a full commented
    > # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
    > # samba-doc package is installed.
    > [global]
    > workgroup = WORKGROUP
    > passdb backend = tdbsam
    > printing = cups
    > printcap name = cups
    > printcap cache time = 750
    > cups options = raw
    > map to guest = Bad User
    > usershare allow guests = No
    > include = /etc/samba/dhcp.conf
    > logon path = \\%L\profiles\.msprofile
    > logon home = \\%L\%U\.9xprofile
    > logon drive = P:
    > add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$
    > domain logons = No
    > domain master = No
    > # netbios name = srvbcp02
    > security = user
    > wins support = No
    > log level = 0
    > debug level = 0
    >
    >
    >
    >
    >
    >
    > read raw = yes
    > write raw = yes
    > wide links=yes
    > getwd cache=yes
    > stat cache = yes
    > strict sync = no
    > use sendfile = yes
    > large readwrite = yes
    > oplock contention limit = 5
    > oplock break wait time = 100
    > case sensitive = true
    > strict allocate = yes
    > max xmit = 131072
    > use sendfile = Yes
    > dead time = 15
    > getwd cache = Yes
    >
    >
    > disable netbios = yes
    > nmbd bind explicit broadcast = no
    > netbios name = srvbcp02
    >
    >
    > min receivefile size = 43638
    > aio read size = 643638
    > aio write size = 643638
    > aio write behind = false
    >
    >
    > ##Optimize tcp
    > socket options = TCP_NODELAY SO_RCVBUF=262144 SO_SNDBUF=262144 IPTOS_LOWDELAY SO_KEEPALIVE
    >
    >
    > socket options = SO_KEEPALIVE SO_REUSEADDR \
    > SO_BROADCAST TCP_NODELAY IPTOS_LOWDELAY \
    > IPTOS_THROUGHPUT SO_SNDBUF=262144 SO_RCVBUF=262144
    >
    >
    > write cache size = 12826144
    > strict allocate = yes
    >
    >
    >
    >
    > [srvbcp02]
    > comment = Server BCP02
    > inherit acls = Yes
    > path = /srv/bcp/vol01
    > read only = No
    > guest ok = Yes
    > hosts allow = 172.16.16.250, 172.16.16.254, 172.16.16.176, 172.16.0.112, 172.17.32.22, 172.16.16.189
    >
    > srvbcp02:~ #
    >
    >
    >
    > --------------------
    >
    >


    Serg;

    The socket options parameter is a historic relic and generally slows a modern kernel ( 2.6 or more). See for example
    any of these:

    http://lists.samba.org/archive/samba...ch/154326.html
    http://lists.samba.org/archive/samba...er/151709.html
    http://lists.samba.org/archive/samba...ch/139036.html

    I would suggest you comment out both of these. ( I suspect only the last one is used anyway, when two values are set for
    a parameter it is generally only the last which is used.)

    I would also suggest that you allow these to go to default values unless you have first tested.(comment them out):
    Code:
    min receivefile size
    aio read size
    aio write size
    aio write behind
    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green

    This is smb.conf at this time:
    Code:
    srvbcp02:/srv/ftp # cat /etc/samba/smb.conf
    # smb.conf is the main Samba configuration file. You find a full commented
    # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
    # samba-doc package is installed.
    [global]
        workgroup = WORKGROUP
        passdb backend = tdbsam
        printing = cups
        printcap name = cups
        printcap cache time = 750
        cups options = raw
        map to guest = Bad User
        usershare allow guests = No
        include = /etc/samba/dhcp.conf
        logon path = \\%L\profiles\.msprofile
        logon home = \\%L\%U\.9xprofile
        logon drive = P:
        add machine script = /usr/sbin/useradd  -c Machine -d /var/lib/nobody -s /bin/false %m$
        domain logons = No
        domain master = No
    #    netbios name = srvbcp02
        security = user
        wins support = No
        log level = 0
        debug level = 0
    
        use sendfile = yes
        min receivefile size = 0
    #    aio read size
    #    aio write size
    #    aio write behind
    
    [srvbcp02]
        comment = Server BCP02
        inherit acls = Yes
        path = /srv/bcp/vol01
        read only = No
        guest ok = Yes
        hosts allow = 172.16.16.250, 172.16.16.254, 172.16.16.176, 172.16.0.112, 172.17.32.22, 172.16.16.189
        
    srvbcp02:/srv/ftp
    with or without "aio ...." - speed no changed
    with or withoue "socket" - speed no changed
    Speed copy from the XPSP3 to SAMBA <=9000Kb/sec

    May be problem not in the Samba.. Why ?
    This my new Tes:
    In the my opensuse13.1(with samba) - add ftp server.
    Code:
    srvbcp02:/srv/ftp # rpm -qa | grep -i ftp
    yast2-ftp-server-3.0.0-2.1.4.noarch
    vsftpd-3.0.2-10.1.2.i586
    tftp-5.2-7.1.2.i586
    tnftp-20100108-2.1.2.i586
    yast2-tftp-server-3.0.0-2.1.4.noarch
    srvbcp02:/srv/ftp #
    From the XPSP3 put file ( over ftp ) to the FTPServer(my linux opensuse13.1)..
    Speed = 9727,94 Kb/sec

    Slowly....XPSP3 have 100Mb LanCard. OpenSUSE13.1 have 1000Gb Lan card..


    Serg

  6. #6

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    Quote Originally Posted by skoltogyan View Post
    This is smb.conf at this time:
    Code:
    srvbcp02:/srv/ftp # cat /etc/samba/smb.conf
    # smb.conf is the main Samba configuration file. You find a full commented
    # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
    # samba-doc package is installed.
    [global]
        workgroup = WORKGROUP
        passdb backend = tdbsam
        printing = cups
        printcap name = cups
        printcap cache time = 750
        cups options = raw
        map to guest = Bad User
        usershare allow guests = No
        include = /etc/samba/dhcp.conf
        logon path = \\%L\profiles\.msprofile
        logon home = \\%L\%U\.9xprofile
        logon drive = P:
        add machine script = /usr/sbin/useradd  -c Machine -d /var/lib/nobody -s /bin/false %m$
        domain logons = No
        domain master = No
    #    netbios name = srvbcp02
        security = user
        wins support = No
        log level = 0
        debug level = 0
    
        use sendfile = yes
        min receivefile size = 0
    #    aio read size
    #    aio write size
    #    aio write behind
    
    [srvbcp02]
        comment = Server BCP02
        inherit acls = Yes
        path = /srv/bcp/vol01
        read only = No
        guest ok = Yes
        hosts allow = 172.16.16.250, 172.16.16.254, 172.16.16.176, 172.16.0.112, 172.17.32.22, 172.16.16.189
        
    srvbcp02:/srv/ftp
    with or without "aio ...." - speed no changed
    with or withoue "socket" - speed no changed
    Speed copy from the XPSP3 to SAMBA <=9000Kb/sec

    May be problem not in the Samba.. Why ?
    This my new Tes:
    In the my opensuse13.1(with samba) - add ftp server.
    Code:
    srvbcp02:/srv/ftp # rpm -qa | grep -i ftp
    yast2-ftp-server-3.0.0-2.1.4.noarch
    vsftpd-3.0.2-10.1.2.i586
    tftp-5.2-7.1.2.i586
    tnftp-20100108-2.1.2.i586
    yast2-tftp-server-3.0.0-2.1.4.noarch
    srvbcp02:/srv/ftp #
    From the XPSP3 put file ( over ftp ) to the FTPServer(my linux opensuse13.1)..
    Speed = 9727,94 Kb/sec

    Slowly....XPSP3 have 100Mb LanCard. OpenSUSE13.1 have 1000Gb Lan card..


    Serg
    This is iperf results ( between OpenSUSE13.1_172.16.16.144 and XPSP3_172.16.0.112 ):
    Code:
    srvbcp02:/etc/samba # iperf  -s
    ------------------------------------------------------------
    Server listening on TCP port 5001
    TCP window size: 85.3 KByte (default)
    ------------------------------------------------------------
    [  4] local 172.16.16.144 port 5001 connected with 172.16.0.112 port 1714
    [ ID] Interval       Transfer     Bandwidth
    [  4]  0.0-10.0 sec   102 MBytes  85.7 Mbits/sec
    ^Csrvbcp02:/etc/samba # iperf  -c 172.16.0.112
    ------------------------------------------------------------
    Client connecting to 172.16.0.112, TCP port 5001
    TCP window size: 21.0 KByte (default)
    ------------------------------------------------------------
    [  3] local 172.16.16.144 port 41937 connected with 172.16.0.112 port 5001
    [ ID] Interval       Transfer     Bandwidth
    [  3]  0.0-10.0 sec   113 MBytes  95.0 Mbits/sec
    srvbcp02:/etc/samba #

  7. #7
    Join Date
    Nov 2009
    Location
    ND, USA
    Posts
    1,131

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    On 5/13/2014 1:56 AM, skoltogyan wrote:
    >

    <snip>

    >> Speed copy from the XPSP3 to SAMBA <=9000Kb/sec
    >>
    >> May be problem not in the Samba.. Why ?
    >> This my new Tes:
    >> In the my opensuse13.1(with samba) - add ftp server.
    >>>

    > Code:
    > --------------------
    > > > srvbcp02:/srv/ftp # rpm -qa | grep -i ftp

    > > yast2-ftp-server-3.0.0-2.1.4.noarch
    > > vsftpd-3.0.2-10.1.2.i586
    > > tftp-5.2-7.1.2.i586
    > > tnftp-20100108-2.1.2.i586
    > > yast2-tftp-server-3.0.0-2.1.4.noarch
    > > srvbcp02:/srv/ftp #
    > >

    > --------------------
    >>>

    >>
    >> From the XPSP3 put file ( over ftp ) to the FTPServer(my linux
    >> opensuse13.1)..
    >> Speed = 9727,94 Kb/sec
    >>
    >> Slowly....XPSP3 have 100Mb LanCard. OpenSUSE13.1 have 1000Gb Lan
    >> card..
    >>
    >>
    >> Serg

    >
    > This is iperf results ( between OpenSUSE13.1_172.16.16.144 and
    > XPSP3_172.16.0.112 ):
    >
    > Code:
    > --------------------
    > srvbcp02:/etc/samba # iperf -s
    > ------------------------------------------------------------
    > Server listening on TCP port 5001
    > TCP window size: 85.3 KByte (default)
    > ------------------------------------------------------------
    > [ 4] local 172.16.16.144 port 5001 connected with 172.16.0.112 port 1714
    > [ ID] Interval Transfer Bandwidth
    > [ 4] 0.0-10.0 sec 102 MBytes 85.7 Mbits/sec
    > ^Csrvbcp02:/etc/samba # iperf -c 172.16.0.112
    > ------------------------------------------------------------
    > Client connecting to 172.16.0.112, TCP port 5001
    > TCP window size: 21.0 KByte (default)
    > ------------------------------------------------------------
    > [ 3] local 172.16.16.144 port 41937 connected with 172.16.0.112 port 5001
    > [ ID] Interval Transfer Bandwidth
    > [ 3] 0.0-10.0 sec 113 MBytes 95.0 Mbits/sec
    > srvbcp02:/etc/samba #
    >
    >
    > --------------------
    >
    >

    [quote=serg]
    Server with Samba have 1GLanNIC.
    XPSP3 Have 100MbLanNic
    [/quote
    I'm not sure just what the problem is. The NIC on XP is rated at 100Mb and you are getting 85-95Mb. IMHO that is about
    as good as you would expect.

    As Samba4 will first try to connect with smb2, which XP does not understand, and then negotiate down. You might get
    marginally better performance between Samba and XP with these parameters:
    Code:
    client max protocol=NT1
    server max protocol=NT1
    However, setting this will likely seriously degrade performance between Samba and Windows versions Vista or higher.
    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green

  8. #8

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    [QUOTE=venzkep;2643125]On 5/13/2014 1:56 AM, skoltogyan wrote:
    >

    <snip>

    >> Speed copy from the XPSP3 to SAMBA <=9000Kb/sec
    >>
    >> May be problem not in the Samba.. Why ?
    >> This my new Tes:
    >> In the my opensuse13.1(with samba) - add ftp server.
    >>>

    > Code:
    > --------------------
    > > > srvbcp02:/srv/ftp # rpm -qa | grep -i ftp

    > > yast2-ftp-server-3.0.0-2.1.4.noarch
    > > vsftpd-3.0.2-10.1.2.i586
    > > tftp-5.2-7.1.2.i586
    > > tnftp-20100108-2.1.2.i586
    > > yast2-tftp-server-3.0.0-2.1.4.noarch
    > > srvbcp02:/srv/ftp #
    > >

    > --------------------
    >>>

    >>
    >> From the XPSP3 put file ( over ftp ) to the FTPServer(my linux
    >> opensuse13.1)..
    >> Speed = 9727,94 Kb/sec
    >>
    >> Slowly....XPSP3 have 100Mb LanCard. OpenSUSE13.1 have 1000Gb Lan
    >> card..
    >>
    >>
    >> Serg

    >
    > This is iperf results ( between OpenSUSE13.1_172.16.16.144 and
    > XPSP3_172.16.0.112 ):
    >
    > Code:
    > --------------------
    > srvbcp02:/etc/samba # iperf -s
    > ------------------------------------------------------------
    > Server listening on TCP port 5001
    > TCP window size: 85.3 KByte (default)
    > ------------------------------------------------------------
    > [ 4] local 172.16.16.144 port 5001 connected with 172.16.0.112 port 1714
    > [ ID] Interval Transfer Bandwidth
    > [ 4] 0.0-10.0 sec 102 MBytes 85.7 Mbits/sec
    > ^Csrvbcp02:/etc/samba # iperf -c 172.16.0.112
    > ------------------------------------------------------------
    > Client connecting to 172.16.0.112, TCP port 5001
    > TCP window size: 21.0 KByte (default)
    > ------------------------------------------------------------
    > [ 3] local 172.16.16.144 port 41937 connected with 172.16.0.112 port 5001
    > [ ID] Interval Transfer Bandwidth
    > [ 3] 0.0-10.0 sec 113 MBytes 95.0 Mbits/sec
    > srvbcp02:/etc/samba #
    >
    >
    > --------------------
    >
    >

    Quote Originally Posted by serg
    Server with Samba have 1GLanNIC.
    XPSP3 Have 100MbLanNic
    [/quote
    I'm not sure just what the problem is. The NIC on XP is rated at 100Mb and you are getting 85-95Mb. IMHO that is about
    as good as you would expect.

    As Samba4 will first try to connect with smb2, which XP does not understand, and then negotiate down. You might get
    marginally better performance between Samba and XP with these parameters:
    Code:
    Code:
    client max protocol=NT1
    server max protocol=NT1
    However, setting this will likely seriously degrade performance between Samba and Windows versions Vista or higher.
    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green
    Thak your for suggestion.
    Result:
    Step-1: add
    Code:
    client max protocol=NT1
    server max protocol=NT1
    in toe the /etc/samba/smb.conf

    Step-2:
    Code:
    service smb stop
    service smb start
    Step-3:
    From my XPSP3 open Far and copy test file (nw65sp8.zip ) from local drive XP to the L \\srvbcp02\srvbcp02 )

    Speed without change.. <=9200Kb/s


    Serg

  9. #9
    Join Date
    Nov 2009
    Location
    ND, USA
    Posts
    1,131

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    On 5/13/2014 10:56 PM, skoltogyan wrote:
    >

    <snip>
    >
    > Step-3:
    > From my XPSP3 open Far and copy test file (nw65sp8.zip ) from local drive
    > XP to the L \\srvbcp02\srvbcp02 )
    >
    > Speed without change.. <=9200Kb/s
    >
    >
    > Serg
    >
    >

    Serg;

    Can you explain how you are benchmarking the speed?
    How are the two machines connected?

    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green

  10. #10

    Default Re: From XpSP3 to SAMBA, speed <=9000Kb/s , Help me !

    Quote Originally Posted by venzkep View Post
    On 5/13/2014 10:56 PM, skoltogyan wrote:
    >

    <snip>
    >
    > Step-3:
    > From my XPSP3 open Far and copy test file (nw65sp8.zip ) from local drive
    > XP to the L \\srvbcp02\srvbcp02 )
    >
    > Speed without change.. <=9200Kb/s
    >
    >
    > Serg
    >
    >

    Serg;

    Can you explain how you are benchmarking the speed?
    How are the two machines connected?

    --
    P.V.
    "We're all in this together, I'm pulling for you" Red Green


    WS_XPSP3_x86-----Switch---SAMBA_OPENSUSE13.1_x86
    and
    WS_XPSP3_x86-------SAMBA_OPENSUSE13.1_x86 ( use direct connection without switch )

    In the XP run FarManager(1.70 beta5 ( build 1634 )
    1) Run Farmanager
    2) In the farManager run:
    Code:
    net use L: \\srvbcp02\srvbcp02
    3) In the Right Panel select folder:
    L:0
    4) In the Left panl select file:
    E\nw65sp5\nw65sp5.zip
    5) Press "F5" and "Enter"
    6) In the Farmanager i see current copy speed.

    Serg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •