Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: OpenSUSE 13.1 and NVIDIA GTX880M

  1. #1

    Default OpenSUSE 13.1 and NVIDIA GTX880M

    I have a Asus G750JZ with a NVIDIA GTX880M. The card works in some fashion with the nouveau driver.

    I have tried to install the NVIDIA driver, the one currently in the repository is not compatible with the 880M. I have tried installing the one from the NVIDIA website (both stable and beta), following the process to black list the nouveau driver, etc. and had no success. An lsmod shows that even blacklisting nouveau doesn't result in the nvidia driver being used. I tried to create a xorg.conf file using the nvidia-xconfig but this results in an error = -61 and being sent back to a runlevel 3.

    Using the driver from Nvidia's site does install and show up in lsmod, but nothing is using it and without the xorg.conf file it appears that the module isn't used. Not sure where the error in the nvidia-xconfig generated xorg.conf file is.

    Any ideas ?

    David

  2. #2

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Quote Originally Posted by d4harvey View Post
    I have tried to install the NVIDIA driver, the one currently in the repository is not compatible with the 880M.
    Right. Support for the GTX880M has been added in 331.67 (released in April) apparently. The repo still contains 331.49.

    I have tried installing the one from the NVIDIA website (both stable and beta), following the process to black list the nouveau driver, etc. and had no success. An lsmod shows that even blacklisting nouveau doesn't result in the nvidia driver being used. I tried to create a xorg.conf file using the nvidia-xconfig but this results in an error = -61 and being sent back to a runlevel 3.

    Using the driver from Nvidia's site does install and show up in lsmod, but nothing is using it and without the xorg.conf file it appears that the module isn't used. Not sure where the error in the nvidia-xconfig generated xorg.conf file is.
    Remove that xorg.conf, you don't need it.
    Xorg _will_ use the nvidia driver if it is installed correctly.

    In addition to blacklisting the nouveau driver (or adding "nomodeset" to your boot options), you should maybe try to set "NO_KMS_IN_INITRD=yes" in /etc/sysconfig/kernel and run mkinitrd to create a new initrd (this should also copy the blacklist to the initrd).
    At least the second part is crucial after installing the nvidia driver, otherwise nouveau is already loaded by the initrd, making your blacklist useless.

    If this still doesn't help, please post your /var/log/Xorg.0.log.

  3. #3
    Join Date
    Jun 2008
    Location
    Skogås Sweden
    Posts
    638

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    This could also be an Optimus system, what's the output of

    Code:
    /sbin/lspci | grep -E "VGA|3D"

  4. #4

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Xorg log Part 1:

    Code:
    [    52.315] 
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [    52.315] 
    X.Org X Server 1.14.3.901 (1.14.4 RC 1)
    Release Date: 2013-10-26
    [    52.315] X Protocol Version 11, Revision 0
    [    52.315] Build Operating System: openSUSE SUSE LINUX
    [    52.315] Current Operating System: Linux theKeeper.theDungeon 3.11.10-7-desktop #1 SMP PREEMPT Mon Feb 3 09:41:24 UTC 2014 (750023e) x86_64
    [    52.315] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-7-desktop root=UUID=bef6523b-3ce6-4861-87b4-8a36d680e918 resume=/dev/disk/by-id/ata-SanDisk_SD5SE2256G1002E_131579400420-part5 splash=silent quiet showopts
    [    52.315] Build Date: 17 April 2014  05:37:34AM
    [    52.315]  
    [    52.315] Current version of pixman: 0.30.2
    [    52.315]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [    52.315] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    52.315] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May  3 15:20:07 2014
    [    52.315] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [    52.315] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    52.316] (==) No Layout section.  Using the first Screen section.
    [    52.316] (==) No screen section available. Using defaults.
    [    52.316] (**) |-->Screen "Default Screen Section" (0)
    [    52.316] (**) |   |-->Monitor "<default monitor>"
    [    52.316] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
    [    52.316] (==) Automatically adding devices
    [    52.316] (==) Automatically enabling devices
    [    52.316] (==) Automatically adding GPU devices
    [    52.316] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    [    52.316]     Entry deleted from font path.
    [    52.316] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
    [    52.316] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
    [    52.316] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    52.316] (II) Loader magic: 0x803c20
    [    52.316] (II) Module ABI versions:
    [    52.316]     X.Org ANSI C Emulation: 0.4
    [    52.316]     X.Org Video Driver: 14.1
    [    52.316]     X.Org XInput driver : 19.1
    [    52.316]     X.Org Server Extension : 7.0
    [    52.316] (II) xfree86: Adding drm device (/dev/dri/card1)
    [    52.316] (II) xfree86: Adding drm device (/dev/dri/card0)
    [    52.318] (--) PCI:*(0:0:2:0) 8086:0416:1043:157d rev 6, Mem @ 0xed400000/4194304, 0x80000000/268435456, I/O @ 0x0000f000/64
    [    52.318] (--) PCI: (0:1:0:0) 10de:1198:1043:157d rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [    52.318] Initializing built-in extension Generic Event Extension
    [    52.318] Initializing built-in extension SHAPE
    [    52.318] Initializing built-in extension MIT-SHM
    [    52.318] Initializing built-in extension XInputExtension
    [    52.318] Initializing built-in extension XTEST
    [    52.318] Initializing built-in extension BIG-REQUESTS
    [    52.318] Initializing built-in extension SYNC
    [    52.318] Initializing built-in extension XKEYBOARD
    [    52.318] Initializing built-in extension XC-MISC
    [    52.318] Initializing built-in extension SECURITY
    [    52.318] Initializing built-in extension XINERAMA
    [    52.318] Initializing built-in extension XFIXES
    [    52.318] Initializing built-in extension RENDER
    [    52.318] Initializing built-in extension RANDR
    [    52.318] Initializing built-in extension COMPOSITE
    [    52.318] Initializing built-in extension DAMAGE
    [    52.318] Initializing built-in extension MIT-SCREEN-SAVER
    [    52.318] Initializing built-in extension DOUBLE-BUFFER
    [    52.318] Initializing built-in extension RECORD
    [    52.318] Initializing built-in extension DPMS
    [    52.318] Initializing built-in extension X-Resource
    [    52.318] Initializing built-in extension XVideo
    [    52.318] Initializing built-in extension XVideo-MotionCompensation
    [    52.318] Initializing built-in extension XFree86-VidModeExtension
    [    52.318] Initializing built-in extension XFree86-DGA
    [    52.318] Initializing built-in extension XFree86-DRI
    [    52.318] Initializing built-in extension DRI2
    [    52.318] (II) "glx" will be loaded by default.
    [    52.318] (II) LoadModule: "dri2"
    [    52.318] (II) Module "dri2" already built-in
    [    52.318] (II) LoadModule: "glamoregl"
    [    52.319] (WW) Warning, couldn't open module glamoregl
    [    52.319] (II) UnloadModule: "glamoregl"
    [    52.319] (II) Unloading glamoregl
    [    52.319] (EE) Failed to load module "glamoregl" (module does not exist, 0)
    [    52.319] (II) LoadModule: "glx"
    [    52.319] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
    [    52.328] (II) Module glx: vendor="NVIDIA Corporation"
    [    52.328]     compiled for 4.0.2, module version = 1.0.0
    [    52.328]     Module class: X.Org Server Extension
    [    52.328] (II) NVIDIA GLX Module  331.67  Fri Apr  4 11:43:47 PDT 2014
    [    52.328] Loading extension GLX
    [    52.328] (==) Matched intel as autoconfigured driver 0
    [    52.328] (==) Matched nvidia as autoconfigured driver 1
    [    52.328] (==) Matched nouveau as autoconfigured driver 2
    [    52.328] (==) Matched nv as autoconfigured driver 3
    [    52.328] (==) Matched intel as autoconfigured driver 4
    [    52.328] (==) Matched modesetting as autoconfigured driver 5
    [    52.328] (==) Matched fbdev as autoconfigured driver 6
    [    52.328] (==) Matched vesa as autoconfigured driver 7
    [    52.328] (==) Assigned the driver to the xf86ConfigLayout
    [    52.328] (II) LoadModule: "intel"
    [    52.328] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
    [    52.355] (II) Module intel: vendor="X.Org Foundation"
    [    52.355]     compiled for 1.14.3.901, module version = 2.99.906
    [    52.355]     Module class: X.Org Video Driver
    [    52.355]     ABI class: X.Org Video Driver, version 14.1
    [    52.355] (II) LoadModule: "nvidia"
    [    52.356] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
    [    52.357] (II) Module nvidia: vendor="NVIDIA Corporation"
    [    52.357]     compiled for 4.0.2, module version = 1.0.0
    [    52.357]     Module class: X.Org Video Driver
    [    52.357] (II) LoadModule: "nouveau"
    [    52.357] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
    [    52.358] (II) Module nouveau: vendor="X.Org Foundation"
    [    52.358]     compiled for 1.14.3, module version = 1.0.9
    [    52.358]     Module class: X.Org Video Driver
    [    52.358]     ABI class: X.Org Video Driver, version 14.1
    [    52.358] (II) LoadModule: "nv"
    [    52.358] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
    [    52.358] (II) Module nv: vendor="X.Org Foundation"
    [    52.358]     compiled for 1.14.3, module version = 2.1.20
    [    52.358]     Module class: X.Org Video Driver
    [    52.358]     ABI class: X.Org Video Driver, version 14.1
    [    52.358] (II) LoadModule: "modesetting"
    [    52.359] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
    [    52.359] (II) Module modesetting: vendor="X.Org Foundation"
    [    52.359]     compiled for 1.14.3.901, module version = 0.8.0
    [    52.359]     Module class: X.Org Video Driver
    [    52.359]     ABI class: X.Org Video Driver, version 14.1
    [    52.359] (II) LoadModule: "fbdev"
    [    52.359] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
    [    52.359] (II) Module fbdev: vendor="X.Org Foundation"
    [    52.359]     compiled for 1.14.3, module version = 0.4.3
    [    52.359]     Module class: X.Org Video Driver
    [    52.359]     ABI class: X.Org Video Driver, version 14.1
    [    52.359] (II) LoadModule: "vesa"
    [    52.360] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
    [    52.360] (II) Module vesa: vendor="X.Org Foundation"
    [    52.360]     compiled for 1.14.3, module version = 2.3.3
    [    52.360]     Module class: X.Org Video Driver
    [    52.360]     ABI class: X.Org Video Driver, version 14.1

  5. #5

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Xorg Log Part 2:

    Code:
    [    52.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
        HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
        HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
        HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
        HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
    [    52.360] (II) NVIDIA dlloader X Driver  331.67  Fri Apr  4 11:24:40 PDT 2014
    [    52.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [    52.360] (II) NOUVEAU driver 
    [    52.360] (II) NOUVEAU driver for NVIDIA chipset families :
    [    52.360]     RIVA TNT        (NV04)
    [    52.360]     RIVA TNT2       (NV05)
    [    52.360]     GeForce 256     (NV10)
    [    52.360]     GeForce 2       (NV11, NV15)
    [    52.360]     GeForce 4MX     (NV17, NV18)
    [    52.360]     GeForce 3       (NV20)
    [    52.360]     GeForce 4Ti     (NV25, NV28)
    [    52.360]     GeForce FX      (NV3x)
    [    52.360]     GeForce 6       (NV4x)
    [    52.360]     GeForce 7       (G7x)
    [    52.360]     GeForce 8       (G8x)
    [    52.360]     GeForce GTX 200 (NVA0)
    [    52.360]     GeForce GTX 400 (NVC0)
    [    52.360] (II) NOUVEAU driver 
    [    52.360] (II) NOUVEAU driver for NVIDIA chipset families :
    [    52.360]     RIVA TNT        (NV04)
    [    52.360]     RIVA TNT2       (NV05)
    [    52.360]     GeForce 256     (NV10)
    [    52.360]     GeForce 2       (NV11, NV15)
    [    52.360]     GeForce 4MX     (NV17, NV18)
    [    52.360]     GeForce 3       (NV20)
    [    52.360]     GeForce 4Ti     (NV25, NV28)
    [    52.360]     GeForce FX      (NV3x)
    [    52.360]     GeForce 6       (NV4x)
    [    52.360]     GeForce 7       (G7x)
    [    52.360]     GeForce 8       (G8x)
    [    52.360]     GeForce GTX 200 (NVA0)
    [    52.360]     GeForce GTX 400 (NVC0)
    [    52.360] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [    52.360] (II) FBDEV: driver for framebuffer: fbdev
    [    52.360] (II) VESA: driver for VESA chipsets: vesa
    [    52.360] (++) using VT number 7
    
    [    52.361] (EE) [drm] KMS not enabled
    [    52.361] (EE) [drm] KMS not enabled
    [    52.361] (WW) Falling back to old probe method for modesetting
    [    52.361] (WW) Falling back to old probe method for fbdev
    [    52.361] (II) Loading sub module "fbdevhw"
    [    52.361] (II) LoadModule: "fbdevhw"
    [    52.361] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
    [    52.361] (II) Module fbdevhw: vendor="X.Org Foundation"
    [    52.361]     compiled for 1.14.3.901, module version = 0.0.2
    [    52.361]     ABI class: X.Org Video Driver, version 14.1
    [    52.361] (WW) Falling back to old probe method for vesa
    [    52.361] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
    [    52.361] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [    52.361] (==) intel(0): RGB weight 888
    [    52.361] (==) intel(0): Default visual is TrueColor
    [    52.361] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
    [    52.361] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
    [    52.361] (**) intel(0): Framebuffer tiled
    [    52.361] (**) intel(0): Pixmaps tiled
    [    52.361] (**) intel(0): "Tear free" disabled
    [    52.361] (**) intel(0): Forcing per-crtc-pixmaps? no
    [    52.361] (II) intel(0): Output eDP1 has no monitor section
    [    52.361] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
    [    52.361] (II) intel(0): Output VGA1 has no monitor section
    [    52.361] (II) intel(0): Output DP1 has no monitor section
    [    52.361] (II) intel(0): Output HDMI1 has no monitor section
    [    52.362] (II) intel(0): Output DP2 has no monitor section
    [    52.362] (II) intel(0): Output HDMI2 has no monitor section
    [    52.362] (II) intel(0): Output VIRTUAL1 has no monitor section
    [    52.362] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
    [    52.362] (==) intel(0): DPI set to (96, 96)
    [    52.362] (II) Loading sub module "dri2"
    [    52.362] (II) LoadModule: "dri2"
    [    52.362] (II) Module "dri2" already built-in
    [    52.362] (II) UnloadModule: "nvidia"
    [    52.362] (II) Unloading nvidia
    [    52.362] (II) UnloadModule: "fbdev"
    [    52.362] (II) Unloading fbdev
    [    52.362] (II) UnloadSubModule: "fbdevhw"
    [    52.362] (II) Unloading fbdevhw
    [    52.362] (II) UnloadModule: "vesa"
    [    52.362] (II) Unloading vesa
    [    52.362] (==) Depth 24 pixmap format is 32 bpp
    [    52.362] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
    [    52.362] (==) intel(0): Backing store disabled
    [    52.362] (==) intel(0): Silken mouse enabled
    [    52.362] (II) intel(0): HW Cursor enabled
    [    52.362] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    52.362] (==) intel(0): DPMS enabled
    [    52.362] (II) intel(0): [DRI2] Setup complete
    [    52.362] (II) intel(0): [DRI2]   DRI driver: i965
    [    52.362] (II) intel(0): direct rendering: DRI2 Enabled
    [    52.362] (==) intel(0): hotplug detection: "enabled"
    [    52.362] (--) RandR disabled
    [    52.365] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    [    52.367] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using eDP1, position (0, 0), rotation normal
    [    52.385] (II) intel(0): Setting screen physical size to 508 x 285
    [    52.416] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [    52.416] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    52.416] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    52.416] (**) Power Button: Applying InputClass "LocalKeyboard"
    [    52.416] (II) LoadModule: "evdev"
    [    52.416] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
    [    52.416] (II) Module evdev: vendor="X.Org Foundation"
    [    52.416]     compiled for 1.14.3, module version = 2.8.2
    [    52.416]     Module class: X.Org XInput Driver
    [    52.416]     ABI class: X.Org XInput driver, version 19.1
    [    52.416] (II) Using input driver 'evdev' for 'Power Button'
    [    52.416] (**) Power Button: always reports core events
    [    52.416] (**) evdev: Power Button: Device: "/dev/input/event5"
    [    52.416] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    52.416] (--) evdev: Power Button: Found keys
    [    52.416] (II) evdev: Power Button: Configuring as keyboard
    [    52.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [    52.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [    52.416] (**) Option "xkb_rules" "evdev"
    [    52.416] (**) Option "xkb_model" "pc104"
    [    52.416] (**) Option "xkb_layout" "us"
    [    52.434] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    [    52.434] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    52.434] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    52.434] (**) Video Bus: Applying InputClass "LocalKeyboard"
    [    52.434] (II) Using input driver 'evdev' for 'Video Bus'
    [    52.434] (**) Video Bus: always reports core events
    [    52.434] (**) evdev: Video Bus: Device: "/dev/input/event10"
    [    52.434] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [    52.434] (--) evdev: Video Bus: Found keys
    [    52.434] (II) evdev: Video Bus: Configuring as keyboard
    [    52.434] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event10"
    [    52.434] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [    52.434] (**) Option "xkb_rules" "evdev"
    [    52.434] (**) Option "xkb_model" "pc104"
    [    52.434] (**) Option "xkb_layout" "us"
    [    52.435] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [    52.435] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    52.435] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    52.435] (**) Video Bus: Applying InputClass "LocalKeyboard"
    [    52.435] (II) Using input driver 'evdev' for 'Video Bus'
    [    52.435] (**) Video Bus: always reports core events
    [    52.435] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [    52.435] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [    52.435] (--) evdev: Video Bus: Found keys
    [    52.435] (II) evdev: Video Bus: Configuring as keyboard 
    [    52.435] (**) Option "config_info"  "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:58/LNXVIDEO:00/input/input9/event9"
    [    52.435] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [    52.435] (**) Option "xkb_rules" "evdev"
    [    52.435] (**) Option "xkb_model" "pc104"
    [    52.435] (**) Option "xkb_layout" "us"
    [    52.435] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [    52.435] (II) No input driver specified, ignoring this device.
    [    52.435] (II) This device may have been added with another device file.
    [    52.435] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [    52.435] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [    52.435] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [    52.435] (**) Sleep Button: Applying InputClass "LocalKeyboard"
    [    52.435] (II) Using input driver 'evdev' for 'Sleep Button'
    [    52.435] (**) Sleep Button: always reports core events
    [    52.435] (**) evdev: Sleep Button: Device: "/dev/input/event4"
    [    52.435] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [    52.435] (--) evdev: Sleep Button: Found keys
    [    52.435] (II) evdev: Sleep Button: Configuring as keyboard
    [    52.435] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
    [    52.435] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [    52.435] (**) Option "xkb_rules" "evdev"
    [    52.435] (**) Option "xkb_model" "pc104"
    [    52.435] (**) Option "xkb_layout" "us"

  6. #6

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Xorg log part 3 (final part):

    Code:
    [    52.435] (II) config/udev: Adding drm device (/dev/dri/card1)
    [    52.435] (II) config/udev: Adding drm device (/dev/dri/card0)
    [    52.435] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event11)
    [    52.435] (II) No input driver specified, ignoring this device.
    [    52.435] (II) This device may have been added with another device file.
    [    52.436] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event12)
    [    52.436] (II) No input driver specified, ignoring this device.
    [    52.436] (II) This device may have been added with another device file.
    [    52.436] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event13)
    [    52.436] (II) No input driver specified, ignoring this device.
    [    52.436] (II) This device may have been added with another device file.
    [    52.436] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1017 (/dev/input/event2)
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: Applying InputClass "evdev pointer catchall"
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: Applying InputClass "evdev pointer catchall"
    [    52.436] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1017'
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: always reports core events
    [    52.436] (**) evdev: Logitech Unifying Device. Wireless PID:1017: Device: "/dev/input/event2"
    [    52.436] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Vendor 0x46d Product 0xc52b
    [    52.436] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found 20 mouse buttons
    [    52.436] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found scroll wheel(s)
    [    52.436] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found relative axes
    [    52.436] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found x and y relative axes
    [    52.436] (II) evdev: Logitech Unifying Device. Wireless PID:1017: Configuring as mouse
    [    52.436] (II) evdev: Logitech Unifying Device. Wireless PID:1017: Adding scrollwheel support
    [    52.436] (**) evdev: Logitech Unifying Device. Wireless PID:1017: YAxisMapping: buttons 4 and 5
    [    52.436] (**) evdev: Logitech Unifying Device. Wireless PID:1017:   EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:  200
    [    52.436] (**) Option "config_info"   "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input2/event2"
    [    52.436] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1017" (type: MOUSE, id 10)
    [    52.436] (II) evdev: Logitech Unifying Device. Wireless PID:1017: initialized for relative axes.
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: (accel) keeping acceleration scheme 1
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration profile 0
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration factor: 2.000
    [    52.436] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration threshold: 4
    [    52.436] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1017 (/dev/input/mouse1)
    [    52.436] (II) No input driver specified, ignoring this device.
    [    52.436] (II) This device may have been added with another device file.
    [    52.436] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event7)
    [    52.436] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
    [    52.436] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
    [    52.436] (**) USB2.0 HD UVC WebCam: Applying InputClass "LocalKeyboard"
    [    52.436] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
    [    52.436] (**) USB2.0 HD UVC WebCam: always reports core events
    [    52.436] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event7"
    [    52.436] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb414
    [    52.436] (--) evdev: USB2.0 HD UVC WebCam: Found keys
    [    52.436] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
    [    52.436] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input7/event7"
    [    52.436] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
    [    52.436] (**) Option "xkb_rules" "evdev"
    [    52.436] (**) Option "xkb_model" "pc104"
    [    52.436] (**) Option "xkb_layout" "us"
    [    52.437] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
    [    52.437] (II) No input driver specified, ignoring this device.
    [    52.437] (II) This device may have been added with another device file.
    [    52.437] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
    [    52.437] (II) No input driver specified, ignoring this device.
    [    52.437] (II) This device may have been added with another device file.
    [    52.437] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
    [    52.437] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [    52.437] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [    52.437] (**) Asus WMI hotkeys: Applying InputClass "LocalKeyboard"
    [    52.437] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
    [    52.437] (**) Asus WMI hotkeys: always reports core events
    [    52.437] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
    [    52.437] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
    [    52.437] (--) evdev: Asus WMI hotkeys: Found keys
    [    52.437] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
    [    52.437] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
    [    52.437] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
    [    52.437] (**) Option "xkb_rules" "evdev"
    [    52.437] (**) Option "xkb_model" "pc104"
    [    52.437] (**) Option "xkb_layout" "us"
    [    52.437] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [    52.437] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    52.437] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    52.437] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
    [    52.437] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [    52.437] (**) AT Translated Set 2 keyboard: always reports core events
    [    52.437] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [    52.437] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [    52.437] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [    52.437] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [    52.437] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [    52.437] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [    52.437] (**) Option "xkb_rules" "evdev"
    [    52.437] (**) Option "xkb_model" "pc104"
    [    52.437] (**) Option "xkb_layout" "us"
    [    52.437] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1)
    [    52.437] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [    52.437] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [    52.437] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [    52.437] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [    52.437] (II) LoadModule: "synaptics"
    [    52.437] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
    [    52.437] (II) Module synaptics: vendor="X.Org Foundation"
    [    52.437]     compiled for 1.14.3, module version = 1.7.1
    [    52.437]     Module class: X.Org XInput Driver
    [    52.437]     ABI class: X.Org XInput driver, version 19.1
    [    52.437] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [    52.437] (**) ETPS/2 Elantech Touchpad: always reports core events
    [    52.437] (**) Option "Device" "/dev/input/event1"
    [    52.472] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3591 (res 33)
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1881 (res 32)
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [    52.472] (**) Option "HorizScrollDelta" "0"
    [    52.472] (**) Option "TapButton1" "1"
    [    52.472] (**) Option "TapButton2" "3"
    [    52.472] (**) Option "TapButton3" "2"
    [    52.472] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [    52.472] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [    52.472] (**) ETPS/2 Elantech Touchpad: always reports core events
    [    52.487] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1"
    [    52.487] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
    [    52.487] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [    52.487] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [    52.487] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.049
    [    52.487] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [    52.487] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [    52.487] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [    52.487] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [    52.487] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [    52.487] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [    52.487] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [    52.487] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [    52.487] (II) No input driver specified, ignoring this device.
    [    52.487] (II) This device may have been added with another device file.
    [    57.960] (II) intel(0): EDID vendor "CMO", prod id 5920
    [    57.960] (II) intel(0): Printing DDC gathered Modelines:
    [    57.960] (II) intel(0): Modeline "1920x1080"x0.0  140.49  1920 1972   2007 2094  1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
    [    57.960] (II) intel(0): Modeline "1920x1080"x0.0   92.45  1920 1968   2000 2080  1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)

  7. #7

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Quote Originally Posted by hank_se View Post
    This could also be an Optimus system, what's the output of

    Code:
    /sbin/lspci | grep -E "VGA|3D"
    Here is the output of the command:

    Code:
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    01:00.0 3D controller: NVIDIA Corporation Device 1198 (rev a1)

  8. #8

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Quote Originally Posted by d4harvey View Post
    Xorg log Part 1:

    Code:
    [    52.319] (II) LoadModule: "glx"
    [    52.319] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
    [    52.328] (II) Module glx: vendor="NVIDIA Corporation"
    [    52.328]     compiled for 4.0.2, module version = 1.0.0
    [    52.328]     Module class: X.Org Server Extension
    [    52.328] (II) NVIDIA GLX Module  331.67  Fri Apr  4 11:43:47 PDT 2014
    [    52.328] Loading extension GLX
    [    52.328] (==) Matched intel as autoconfigured driver 0
    [    52.328] (==) Matched nvidia as autoconfigured driver 1
    [    52.328] (==) Matched nouveau as autoconfigured driver 2
    [    52.328] (==) Matched nv as autoconfigured driver 3
    [    52.328] (==) Matched intel as autoconfigured driver 4
    [    52.328] (==) Matched modesetting as autoconfigured driver 5
    [    52.328] (==) Matched fbdev as autoconfigured driver 6
    [    52.328] (==) Matched vesa as autoconfigured driver 7
    [    52.328] (==) Assigned the driver to the xf86ConfigLayout
    [    52.328] (II) LoadModule: "intel"
    [    52.328] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
    [    52.355] (II) Module intel: vendor="X.Org Foundation"
    [    52.355]     compiled for 1.14.3.901, module version = 2.99.906
    [    52.355]     Module class: X.Org Video Driver
    [    52.355]     ABI class: X.Org Video Driver, version 14.1
    [    52.355] (II) LoadModule: "nvidia"
    [    52.356] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
    [    52.357] (II) Module nvidia: vendor="NVIDIA Corporation"
    [    52.357]     compiled for 4.0.2, module version = 1.0.0
    [    52.357]     Module class: X.Org Video Driver
    [
    As the intel driver is loaded as well, this indeed seems to be an Optimus system.

    So the nvidia driver WILL NOT work for you, unless there is an option to disable the intel chip in your BIOS.
    If not, you'll have to use Bumblebee instead, or at least uninstall the nvidia driver to make the intel driver work.
    Last edited by wolfi323; 03-May-2014 at 15:39.

  9. #9

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    it would appear this is an optimus system. that explains the Xorg log.

  10. #10

    Default Re: OpenSUSE 13.1 and NVIDIA GTX880M

    Quote Originally Posted by wolfi323 View Post
    As the intel driver is loaded as well, this indeed seems to be an Optimus system.

    So the nvidia driver WILL NOT work for you, unless there is an option to disable the intel chip in your BIOS.
    If not, you'll have to use Bumblebee instead.
    Thanks wolfi323,

    I will take a look at bumblebee and the see what options are in the firmware

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •