Results 1 to 2 of 2

Thread: Apache is giving me a headache

  1. #1

    Default Apache is giving me a headache

    Apache was working just fine and then I messed with the default-server.conf file and put a typo in it.

    Apache wouldn't start. I fixed that typo and apache starts but now getting 403 permission errors.

    httpd.conf
    Code:
    #
    # /etc/apache2/httpd.conf 
    #
    # This is the main Apache server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
    # the directives.
    
    # Based upon the default apache configuration file that ships with apache,
    # which is based upon the NCSA server configuration files originally by Rob
    # McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.
    
    # If possible, avoid changes to this file. It does mainly contain Include
    # statements and global settings that can/should be overridden in the
    # configuration of your virtual hosts.
    
    # Quickstart guide:
    # http://en.opensuse.org/Apache_Quickstart_HOWTO
    
    
    # Overview of include files, chronologically:
    #
    # httpd.conf
    #  | 
    #  |-- uid.conf  . . . . . . . . . . . . . .  UserID/GroupID to run under
    #  |-- server-tuning.conf  . . . . . . . . .  sizing of the server (how many processes to start, ...)
    #  |-- sysconfig.d/loadmodule.conf . . . . .  [*] load these modules
    #  |-- listen.conf . . . . . . . . . . . . .  IP adresses / ports to listen on
    #  |-- mod_log_config.conf . . . . . . . . .  define logging formats
    #  |-- sysconfig.d/global.conf . . . . . . .  [*] server-wide general settings
    #  |-- mod_status.conf . . . . . . . . . . .  restrict access to mod_status (server monitoring)
    #  |-- mod_info.conf . . . . . . . . . . . .  restrict access to mod_info
    #  |-- mod_usertrack.conf  . . . . . . . . .  defaults for cookie-based user tracking
    #  |-- mod_autoindex-defaults.conf . . . . .  defaults for displaying of server-generated directory listings
    #  |-- mod_mime-defaults.conf  . . . . . . .  defaults for mod_mime configuration
    #  |-- errors.conf . . . . . . . . . . . . .  customize error responses
    #  |-- ssl-global.conf . . . . . . . . . . .  SSL conf that applies to default server _and all_ virtual hosts
    #  |
    #  |-- default-server.conf . . . . . . . . .  set up the default server that replies to non-virtual-host requests
    #  |    |--mod_userdir.conf  . . . . . . . .  enable UserDir (if mod_userdir is loaded)
    #  |    `--conf.d/apache2-manual?conf  . . .  add the docs ('?' = if installed)
    #  |
    #  |-- sysconfig.d/include.conf  . . . . . .  [*] your include files 
    #  |                                             (for each file to be included here, put its name 
    #  |                                              into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
    #  |
    #  `-- vhosts.d/ . . . . . . . . . . . . . .  for each virtual host, place one file here
    #       `-- *.conf . . . . . . . . . . . . .     (*.conf is automatically included)
    #
    #
    # Files marked [*] are created from sysconfig upon server restart: instead of
    # these files, you edit /etc/sysconfig/apache2
    
    
    
    #  Filesystem layout:
    #
    # /etc/apache2/
    #  |-- charset.conv  . . . . . . . . . . . .  for mod_auth_ldap
    #  |-- conf.d/
    #  |   |-- apache2-manual.conf . . . . . . .  conf that comes with apache2-doc
    #  |   |-- mod_php4.conf . . . . . . . . . .  (example) conf that comes with apache2-mod_php4
    #  |   `-- ... . . . . . . . . . . . . . . .  other configuration added by packages
    #  |-- default-server.conf
    #  |-- errors.conf
    #  |-- httpd.conf  . . . . . . . . . . . . .  top level configuration file
    #  |-- listen.conf
    #  |-- magic
    #  |-- mime.types -> ../mime.types
    #  |-- mod_autoindex-defaults.conf
    #  |-- mod_info.conf
    #  |-- mod_log_config.conf
    #  |-- mod_mime-defaults.conf
    #  |-- mod_perl-startup.pl
    #  |-- mod_status.conf
    #  |-- mod_userdir.conf
    #  |-- mod_usertrack.conf
    #  |-- server-tuning.conf
    #  |-- ssl-global.conf
    #  |-- ssl.crl/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Revocation Lists (CRL)
    #  |-- ssl.crt/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificates
    #  |-- ssl.csr/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Signing Requests
    #  |-- ssl.key/  . . . . . . . . . . . . . .  PEM-encoded RSA Private Keys
    #  |-- ssl.prm/  . . . . . . . . . . . . . .  public DSA Parameter Files
    #  |-- sysconfig.d/  . . . . . . . . . . . .  files that are created from /etc/sysconfig/apache2
    #  |   |-- global.conf
    #  |   |-- include.conf
    #  |   `-- loadmodule.conf
    #  |-- uid.conf
    #  `-- vhosts.d/ . . . . . . . . . . . . . .  put your virtual host configuration (*.conf) here
    #      |-- vhost-ssl.template
    #      `-- vhost.template
    
    
    
    ### Global Environment ######################################################
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests.
    
    # run under this user/group id
    Include /etc/apache2/uid.conf
    
    # - how many server processes to start (server pool regulation)
    # - usage of KeepAlive
    Include /etc/apache2/server-tuning.conf
    
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog /var/log/apache2/error_log
    
    # generated from APACHE_MODULES in /etc/sysconfig/apache2
    Include /etc/apache2/sysconfig.d/loadmodule.conf
    
    # IP addresses / ports to listen on
    Include /etc/apache2/listen.conf
    
    # predefined logging formats
    Include /etc/apache2/mod_log_config.conf
    
    # generated from global settings in /etc/sysconfig/apache2
    Include /etc/apache2/sysconfig.d/global.conf
    
    # optional mod_status, mod_info
    Include /etc/apache2/mod_status.conf
    Include /etc/apache2/mod_info.conf
    
    # optional cookie-based user tracking
    # read the documentation before using it!!
    Include /etc/apache2/mod_usertrack.conf
    
    # configuration of server-generated directory listings
    Include /etc/apache2/mod_autoindex-defaults.conf
    
    # associate MIME types with filename extensions
    TypesConfig /etc/apache2/mime.types
    DefaultType text/plain
    Include /etc/apache2/mod_mime-defaults.conf
    
    # set up (customizable) error responses
    Include /etc/apache2/errors.conf
    
    # global (server-wide) SSL configuration, that is not specific to 
    # any virtual host
    Include /etc/apache2/ssl-global.conf
    
    # forbid access to the entire filesystem by default
    <Directory />
        Options None
        AllowOverride None
        Order deny,allow
        Deny from all
    </Directory>
    
    # use .htaccess files for overriding,
    AccessFileName .htaccess
    # and never show them
    <Files ~ "^\.ht">
        Order allow,deny
        Deny from all
    </Files>
    
    # List of resources to look for when the client requests a directory
    DirectoryIndex index.php index.html index.html.var
    
    ### 'Main' server configuration #############################################
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    Include /etc/apache2/default-server.conf
    
    
    # Another way to include your own files
    #
    # The file below is generated from /etc/sysconfig/apache2,
    # include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
    # APACHE_CONF_INCLUDE_DIRS
    Include /etc/apache2/sysconfig.d/include.conf
    
    
    ### Virtual server configuration ############################################
    #
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    #
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs-2.2/vhosts/>
    # for further details before you try to setup virtual hosts.
    #
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    #
    Include /etc/apache2/vhosts.d/*.conf
    
    
    # Note: instead of adding your own configuration here, consider 
    #       adding it in your own file (/etc/apache2/httpd.conf.local)
    #       putting its name into APACHE_CONF_INCLUDE_FILES in 
    #       /etc/sysconfig/apache2 -- this will make system updates 
    #       easier :)
    default-server.conf
    Code:
    #
    # Global configuration that will be applicable for all virtual hosts, unless
    # deleted here, or overriden elswhere.
    # 
    
    DocumentRoot "/srv/www/htdocs"
    
    #
    # Configure the DocumentRoot
    #
    <Directory "/srv/www/htdocs">
              # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        #
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        #
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs-2.2/mod/core.html#options
        # for more information.
    Options Indexes
              # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
    AllowOverride All
              # Controls who can get stuff from this server.
    Order allow,deny
     Allow from all
    </Directory>
    
    # Aliases: aliases can be added as needed (with no limit). The format is 
    # Alias fakename realname
    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/".  If the fakename is slash-terminated, then the 
    # realname must also be slash terminated, and if the fakename omits the 
    # trailing slash, the realname must also omit it.
    #
    # We include the /icons/ alias for FancyIndexed directory listings.  If you
    # do not use FancyIndexing, you may comment this out.
    #
    Alias /icons/ "/usr/share/apache2/icons/"
    
    <Directory "/usr/share/apache2/icons">
     Options Indexes MultiViews
     AllowOverride None
     Order allow,deny
     Allow from all
    </Directory>
    
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
    
    # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/srv/www/cgi-bin">
     AllowOverride None
     Options +ExecCGI -Includes
     Order allow,deny
     Allow from all
    </Directory>
    
    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.
    #
    # To disable it, simply remove userdir from the list of modules in APACHE_MODULES 
    # in /etc/sysconfig/apache2.
    #
    <IfModule mod_userdir.c>
              # Note that the name of the user directory ("public_html") cannot simply be
        # changed here, since it is a compile time setting. The apache package
        # would have to be rebuilt. You could work around by deleting
        # /usr/sbin/suexec, but then all scripts from the directories would be
        # executed with the UID of the webserver.
    UserDir public_html
              # The actual configuration of the directory is in
        # /etc/apache2/mod_userdir.conf.
    Include /etc/apache2/mod_userdir.conf
    </IfModule>
    
    
    # Include all *.conf files from /etc/apache2/conf.d/.
    #
    # This is mostly meant as a place for other RPM packages to drop in their
    # configuration snippet.
    #
    # You can comment this out here if you want those bits include only in a
    # certain virtual host, but not here.
    #
    Include /etc/apache2/conf.d/*.conf
    
    # The manual... if it is installed ('?' means it won't complain)
    Include /etc/apache2/conf.d/manual.conf
    NameVirtualHost 127.0.0.1
    folder permissions are all 755 with owner as root and group www with +x.

  2. #2

    Default Re: Apache is giving me a headache

    Check the logs inside the directory

    Code:
    /var/log/apache2
    Also there is a yast module to configure apache2 in openSUSE.

    Code:
    yast2 http-server
    Install it if it is not installed already. Also as a general rule make a backup of every file you are editing no matter what/which editor you are using, take it from some one who has been bitten by that mistake and learned the "hard way"
    "Unfortunately time is always against us" -- [Morpheus]

    .:https://github.com/Jetchisel:.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •