k3b burning trouble -- 12.3

English Applications
1

Hey there. Newby here.

recently switched to 12.3 xfce. trying to install burning tool. trouble with brasero, so i choose k3b which worked out fin over the years. but every time I try to burn, it ejects the cd while sending cue-sheet.

System

K3b Version: 1.0.5

KDE Version: 3.5.10 “release 262”
QT Version: 3.3.8c
Kernel: 3.7.10-1.28-default
Devices

SAMSUNG CDRW/DVD SN-324F U203 (/dev/sr0, /dev/sg1) [CD-R, CD-RW, CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]

Used versions

cdrecord: 1.1.11

cdrecord

/usr/bin/X11/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: ‘/dev/sr0’
devname: ‘/dev/sr0’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 162
TOC Type: 0 = CD-DA
Driveropts: ‘burnfree’
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'SAMSUNG ’
Identification : ‘CDRW/DVD SN-324F’
Revision : ‘U203’
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0010 (DVD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1959936 = 1914 KB
FIFO size : 12582912 = 12288 KB
pregap1: -1
Track 01: audio 516 MB (51:09.97) no preemp swab copy
Total size: 516 MB (51:09.97) = 230248 sectors
Lout start: 516 MB (51:11/73) = 230248 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 129598
Starting to write CD/DVD at speed 24.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
Speed set to 4226 KB/s
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer … input buffer ready.
Performing OPC…
Sending CUE sheet…
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF D5 28 00 02 9A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 3.765s timeout 200s
/usr/bin/X11/wodim: Could not write Lead-in.
SAO startsec: -11634
Writing lead-in…
write CD-Text data: error after 63936 bytes
Writing time: 29.091s
BURN-Free was never needed.
/usr/bin/X11/wodim: fifo had 192 puts and 0 gets.
/usr/bin/X11/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:

/usr/bin/X11/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -dao driveropts=burnfree textfile=/tmp/k3bSECaMw.dat -eject -useinfo -audio /tmp/kde-captain/k3b_audio_1_01.inf

could someone PLEASE tell me whats the problem?

thanx in advance :slight_smile:

2

franz gans wrote:

>
> Hey there. Newby here.
>
> recently switched to 12.3 xfce. trying to install burning tool.
> trouble with brasero, so i choose k3b which worked out fin over the
> years. but every time I try to burn, it ejects the cd while sending
> cue-sheet.
>
>> System
>> -----------------------
>> K3b Version: 1.0.5
>>
>> KDE Version: 3.5.10 “release 262”
>> QT Version: 3.3.8c
>> Kernel: 3.7.10-1.28-default
>> Devices
>> -----------------------
>> SAMSUNG CDRW/DVD SN-324F U203 (/dev/sr0, /dev/sg1) [CD-R, CD-RW,
>> CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW,
>> SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
>>
>> Used versions
>> -----------------------
>> cdrecord: 1.1.11
>>
>> cdrecord
>> -----------------------
>> /usr/bin/X11/wodim: Operation not permitted. Warning: Cannot raise
>> RLIMIT_MEMLOCK limits.
>> scsidev: ‘/dev/sr0’
>> devname: ‘/dev/sr0’
>> scsibus: -2 target: -2 lun: -2
>> Linux sg driver version: 3.5.27
>> Wodim version: 1.1.11
>> SCSI buffer size: 64512
>> Beginning DMA speed test. Set CDR_NODMATEST environment variable if
>> device
>> communication breaks or freezes immediately after that.
>> Text len: 162
>> TOC Type: 0 = CD-DA
>> Driveropts: ‘burnfree’
>> Device type : Removable CD-ROM
>> Version : 5
>> Response Format: 2
>> Capabilities :
>> Vendor_info : 'SAMSUNG ’
>> Identification : ‘CDRW/DVD SN-324F’
>> Revision : ‘U203’
>> Device seems to be: Generic mmc2 DVD-ROM.
>> Current: 0x0009 (CD-R)
>> Profile: 0x000A (CD-RW)
>> Profile: 0x0009 (CD-R) (current)
>> Profile: 0x0008 (CD-ROM)
>> Profile: 0x0010 (DVD-ROM)
>> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
>> Driver flags : MMC-3 SWABAUDIO BURNFREE
>> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
>> RAW/R96R
>> Drive buf size : 1959936 = 1914 KB
>> FIFO size : 12582912 = 12288 KB
>> pregap1: -1
>> Track 01: audio 516 MB (51:09.97) no preemp swab copy
>> Total size: 516 MB (51:09.97) = 230248 sectors
>> Lout start: 516 MB (51:11/73) = 230248 sectors
>> Current Secsize: 2048
>> ATIP info from disk:
>> Indicated writing power: 5
>> Is not unrestricted
>> Is not erasable
>> Disk sub type: Medium Type A, high Beta category (A+) (3)
>> ATIP start of lead in: -11634 (97:26/66)
>> ATIP start of lead out: 359846 (79:59/71)
>> Disk type: Short strategy type (Phthalocyanine or similar)
>> Manuf. index: 3
>> Manufacturer: CMC Magnetics Corporation
>> Blocks total: 359846 Blocks current: 359846 Blocks remaining:
129598
>> Starting to write CD/DVD at speed 24.0 in real SAO mode for single
>> session.
>> Last chance to quit, starting real write in 2 seconds.
>> Speed set to 4226 KB/s
>> 1 seconds.
>> 0 seconds. Operation starts.
>> Waiting for reader process to fill input buffer … input buffer
>> ready. Performing OPC…
>> Sending CUE sheet…
>> Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
>> CDB: 2A 00 FF FF D5 28 00 02 9A 00
>> status: 0x2 (CHECK CONDITION)
>> Sense Bytes: F1 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
>> Sense Key: 0x3 Medium Error, deferred error, Segment 0
>> Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>> Sense flags: Blk 0 (valid)
>> cmd finished after 3.765s timeout 200s
>> /usr/bin/X11/wodim: Could not write Lead-in.
>> SAO startsec: -11634
>> Writing lead-in…
>> write CD-Text data: error after 63936 bytes
>> Writing time: 29.091s
>> BURN-Free was never needed.
>> /usr/bin/X11/wodim: fifo had 192 puts and 0 gets.
>> /usr/bin/X11/wodim: fifo was 0 times empty and 0 times full, min
fill
>> was 100%.
>>
>> cdrecord command:
>> -----------------------
>> /usr/bin/X11/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -dao
>> driveropts=burnfree textfile=/tmp/k3bSECaMw.dat -eject -useinfo
>> -audio /tmp/kde-captain/k3b_audio_1_01.inf
>>
>>
>
> could someone PLEASE tell me whats the problem?
>
> thanx in advance :slight_smile:
Have you tried the latest version of k3b? On openSUSE 13.1 it is 2.02.
Don’t know if it will help. i also use that version on 12.3. But I run
under KDE.

Russ
>

openSUSE 13.1(Linux 3.11.10-7-desktop x86_64|
Intel(R) Quad Core™ i5-4440 CPU @ 3.10GHz|8GB DDR3|
GeForce 8400GS (NVIDIA-Linux-x86_64-331.49)|KDE 4.12.4

3

Well the best K3b/KDE versions available in the openSUSE-12.3 oss repository are 2.0.2/4.10.0. For a very lightweight, fast desktop I prefer Openbox, which I think runs KDE applications better than Xfce, which I find more Gnome-centric. K3b-2.0.2 definately works well from Openbox.