Results 1 to 10 of 10

Thread: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

  1. #1

    Default conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    Former information can not disappear completely.

    My video cards are intel hd3000 and nvidia optimus GT550M, and I have installed bumblebee.

    Is this the matter of video card?

    This is my conky screenshot : http://imagebin.org/290235 .

    Thanks

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,832
    Blog Entries
    15

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    On Sun 02 Feb 2014 12:56:01 PM CST, waterloo2005 wrote:


    conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    Former information can not disappear completely.

    My video cards are intel hd3000 and nvidia optimus GT550M, and I have
    installed bumblebee.

    Is this the matter of video card?

    This is my conky screenshot : http://imagebin.org/290235 .

    Thanks


    Hi
    Sure it's not your conkyrc file overlaying lines? Can you post the
    config at http://paste.opensuse.org/

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  3. #3

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    My .conkyrc : http://paste.opensuse.org/32495873
    I also have a .draw_bg.lua : http://paste.opensuse.org/54076249

    Thanks

  4. #4
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,832
    Blog Entries
    15

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    On Mon 03 Feb 2014 03:06:01 AM CST, waterloo2005 wrote:


    My .conkyrc : http://paste.opensuse.org/32495873
    I also have a .draw_bg.lua : http://paste.opensuse.org/54076249

    Thanks


    Hi
    I would say looking at the config and also running it, it's just a
    configuration issue (as in needs adjusting), probably with the screen
    resolution you have perhaps. What is your screen resolution?

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  5. #5
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,832
    Blog Entries
    15

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    Hi
    Had another quick look, if you change own_window_transparent to no it
    should start to work. There is also a missing ${endif} after the
    ppp0 section.


    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  6. #6

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    Quote Originally Posted by malcolmlewis View Post
    Hi
    Had another quick look, if you change own_window_transparent to no it
    should start to work. There is also a missing ${endif} after the
    ppp0 section.


    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!
    In outer screen 1920x1080 and notebook screen 1366x768 , both have the problem.
    Of course, choosing own_window_transparent to no will conquer this , but will lose transparent.
    The same .conkyrc can be used under ubuntu 12.04 successfully.

    Thanks

  7. #7
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,832
    Blog Entries
    15

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    On Mon 03 Feb 2014 03:06:02 PM CST, waterloo2005 wrote:


    malcolmlewis;2621771 Wrote:
    > Hi
    > Had another quick look, if you change own_window_transparent to no it
    > should start to work. There is also a missing ${endif} after the
    > ppp0 section.
    >
    >
    > --
    > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    > openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    > If you find this post helpful and are logged into the web interface,
    > please show your appreciation and click on the star below... Thanks!


    In outer screen and notebook screen , both have the problem.
    Of course, choosing own_window_transparent to no will conquer this ,
    but will lose transparent.
    The same .conkyrc can be used under ubuntu 12.04 successfully.

    Thanks


    Hi
    Then I would guess it's related to GNOME shell vs Unity?

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  8. #8
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,832
    Blog Entries
    15

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    On Mon 03 Feb 2014 03:06:02 PM CST, waterloo2005 wrote:


    malcolmlewis;2621771 Wrote:
    > Hi
    > Had another quick look, if you change own_window_transparent to no it
    > should start to work. There is also a missing ${endif} after the
    > ppp0 section.
    >
    >
    > --
    > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    > openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    > If you find this post helpful and are logged into the web interface,
    > please show your appreciation and click on the star below... Thanks!


    In outer screen and notebook screen , both have the problem.
    Of course, choosing own_window_transparent to no will conquer this ,
    but will lose transparent.
    The same .conkyrc can be used under ubuntu 12.04 successfully.

    Thanks


    Hi
    I had to increase the bg_alpha=0.80 in the lua script for it to work on
    my system.

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  9. #9
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,832
    Blog Entries
    15

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    On Mon 03 Feb 2014 04:04:45 PM CST, malcolmlewis wrote:

    On Mon 03 Feb 2014 03:06:02 PM CST, waterloo2005 wrote:


    malcolmlewis;2621771 Wrote:
    > Hi
    > Had another quick look, if you change own_window_transparent to no it
    > should start to work. There is also a missing ${endif} after the
    > ppp0 section.
    >
    >
    > --
    > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    > openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    > If you find this post helpful and are logged into the web interface,
    > please show your appreciation and click on the star below... Thanks!


    In outer screen and notebook screen , both have the problem.
    Of course, choosing own_window_transparent to no will conquer this ,
    but will lose transparent.
    The same .conkyrc can be used under ubuntu 12.04 successfully.

    Thanks


    Hi
    I had to increase the bg_alpha=0.80 in the lua script for it to work on
    my system.

    Hi
    Hmmm, try setting the option;
    Code:
    own_window_argb_visual yes
    With my conky I get;



    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  10. #10

    Default Re: conky displays fuzzyly in 13.1 x86_64 gnome 3.10.

    The original conkyrc was tested ok in ubuntu unity .

    I try add own_window_argb_visual yes to conkyrc, now it is ok in opensuse13.1 gnome 3.10 .

    I do not try bg_alpha=0.80 in that lua file.

    Thanks very much !

    Ps . How to remark the post as SOLVED ?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •