Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

  1. #1

    Exclamation OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    I can only seem to get my 13.1 nfs clients to mount the first NFS entry in my fstab file. 12.3 clients are working fine..

    rpc bind is running, firewall is disabled on all clients, chkconfig shows nfs enabled. The new Services Manager shows that
    nfs and rpcbind are Enabled and active on the 13.1 client and nfsV4 is disabled on the server and client systems.


    client fstab:
    host:/usr/local/muse /usr/local/muse nfs rsize=8192,wsize=8192 0 0
    host:/usr/local/LINUX_FILES /usr/local/LINUX_FILES nfs rsize=8192,wsize=8192 0 0
    host:/usr/local/3rdparty /usr/local/3rdparty nfs rsize=8192,wsize=8192 0 0

    server exports:
    /usr/local/muse *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    /usr/local/LINUX_FILES *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    /usr/local/3rdparty *.compro.net(rw,no_subtree_check,no_root_squash,sync)

    Info from the services manager on client:
    nfs.service - LSB: NFS client services Loaded: loaded (/etc/init.d/nfs) Drop-In: /run/systemd/generator/nfs.service.d `-50-insserv.conf-$remote_fs.conf Active: active (running) since Mon 2014-01-20 16:33:42 EST; 16min ago Process: 8883 ExecStop=/etc/init.d/nfs stop (code=exited, status=0/SUCCESS) Process: 8918 ExecStart=/etc/init.d/nfs start (code=exited, status=0/SUCCESS) CGroup: /system.slice/nfs.service `-8948 /usr/sbin/rpc.gssd -D -p /var/lib/nfs/rpc_pipefs
    Jan 20 16:33:41 otw-l systemd[1]: Starting LSB: NFS client services... Jan 20 16:33:42 otw-l nfs[8918]: Starting NFS client services: sm-notify gssd/etc/init.d/nfs: line 225: /run/nfs/nfs-rpc.gssd: No such file or directory Jan 20 16:33:42 otw-l nfs[8918]: ..done Jan 20 16:33:42 otw-l systemd[1]: Started LSB: NFS client services.

    rpcbind.service - RPC Bind
    Loaded: loaded (/usr/lib/systemd/system/rpcbind.service; enabled)
    Active: active (running) since Mon 2014-01-20 16:13:35 EST; 37min ago
    Main PID: 615 (rpcbind)
    CGroup: /system.slice/rpcbind.service
    `-615 /sbin/rpcbind -w -f


    Jan 20 16:13:35 otw-l systemd[1]: Starting RPC Bind...
    Jan 20 16:13:35 otw-l systemd[1]: Started RPC Bind.


    Any help would be appreciated...

    Thank you,

    Curtis Rubel

  2. #2
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    29,834

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    Please, please. To make your post with computer text readable, copy/paste that computer text between CODE tags. you get the CODE tags by clicking on the # button in the tool bar og the post editor.
    Henk van Velden

  3. #3

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    crubel wrote:
    > I can only seem to get my 13.1 nfs clients to mount the first NFS entry
    > in my fstab file. 12.3 clients are working fine..


    Are you running NFS V3 or V4 connections between each of these machines?

  4. #4

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    I turned off NFSv4 to see if that might be the problem, so right now v4 is not even enabled on the nvs server system.

  5. #5

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    Reposting the data from my original post per the reply to my thread.
    My apologies...I am new to posting in the forum.



    Code:
    client fstab:
    host:/usr/local/muse                 /usr/local/muse             nfs     rsize=8192,wsize=8192 0 0 
    host:/usr/local/LINUX_FILES     /usr/local/LINUX_FILES  nfs     rsize=8192,wsize=8192 0 0 
    host:/usr/local/3rdparty            /usr/local/3rdparty           nfs     rsize=8192,wsize=8192 0 0 
    
    server exports:
    /usr/local/muse              *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    /usr/local/LINUX_FILES  *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    /usr/local/3rdparty          *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    
    Info from the services manager on client:
     nfs.service - LSB: NFS client services    Loaded: loaded  (/etc/init.d/nfs)   Drop-In: /run/systemd/generator/nfs.service.d             `-50-insserv.conf-$remote_fs.conf    Active: active (running) since  Mon 2014-01-20 16:33:42 EST; 16min ago   Process: 8883  ExecStop=/etc/init.d/nfs stop (code=exited, status=0/SUCCESS)   Process:  8918 ExecStart=/etc/init.d/nfs start (code=exited, status=0/SUCCESS)     CGroup: /system.slice/nfs.service            `-8948 /usr/sbin/rpc.gssd  -D -p /var/lib/nfs/rpc_pipefs 
    Jan 20 16:33:41 otw-l systemd[1]: Starting LSB: NFS client services...  Jan 20 16:33:42 otw-l nfs[8918]: Starting NFS client services: sm-notify  gssd/etc/init.d/nfs: line 225: /run/nfs/nfs-rpc.gssd: No such file or  directory Jan 20 16:33:42 otw-l nfs[8918]: ..done Jan 20 16:33:42 otw-l  systemd[1]: Started LSB: NFS client services.
    
    rpcbind.service - RPC Bind
       Loaded: loaded (/usr/lib/systemd/system/rpcbind.service; enabled)
       Active: active (running) since Mon 2014-01-20 16:13:35 EST; 37min ago
     Main PID: 615 (rpcbind)
       CGroup: /system.slice/rpcbind.service
               `-615 /sbin/rpcbind -w -f
    
    
    Jan 20 16:13:35 otw-l systemd[1]: Starting RPC Bind...
    Jan 20 16:13:35 otw-l systemd[1]: Started RPC Bind.

  6. #6
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    29,834

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    That is already much better readable. But we prefer that you include the prompt, the command, the output and the next prompt. And lines like
    Code:
    client fstab:
    arre most probably not part of the compter text, so they do not belong there. How can we assess the computer text when you change things there. And the more while you do not tell you changed things (which is understandable when there is e.g. a password in a listiing).

    We aqre relay non-believers of story telling. We believe computer facts (as long as they are not tinkered with).
    Henk van Velden

  7. #7

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    OK in this case since we are talking about a client computer and a server computer, Its important that everyone know where
    that particular data came from, so if I cannot put it in there where does it go?

    Do I put it in the main part of the post and add separate code sections under each of those lines, like this:

    client fstab -- relevant lines posted:
    Code:
    otw-l:/etc # cat fstab
    host:/usr/local/muse    /usr/local/muse nfs     rsize=8192,wsize=8192 0 0 
    host:/usr/local/LINUX_FILES     /usr/local/LINUX_FILES  nfs     rsize=8192,wsize=8192 0 0 
    host:/usr/local/3rdparty        /usr/local/3rdparty     nfs     rsize=8192,wsize=8192 0 0
    server exports file:
    Code:
    ios:/etc # cat exports
    /usr/local/muse *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    /usr/local/LINUX_FILES  *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    /usr/local/3rdparty     *.compro.net(rw,no_subtree_check,no_root_squash,sync)
    Output from systemd status for nfsserver service:
    Code:
    ios:/etc # systemctl status nfsserver.service
    nfsserver.service - LSB: Start the kernel based NFS daemon
       Loaded: loaded (/etc/init.d/nfsserver)
       Active: active (running) since Mon 2014-01-20 21:11:49 CET; 17h ago
       CGroup: /system.slice/nfsserver.service
               |- 1908 /usr/sbin/rpc.idmapd -p /var/lib/nfs/rpc_pipefs
               |-20012 /usr/sbin/rpc.mountd --no-nfs-version 4
               `-20015 /usr/sbin/rpc.statd --no-notify
    
    Jan 21 14:15:19 ios rpc.mountd[20012]: authenticated mount request from otw-l.compro.net:907 for /usr/local/muse (/usr/local/muse)
    Jan 21 14:15:19 ios rpc.mountd[20012]: authenticated mount request from otw-l.compro.net:1022 for /usr/local/LINUX_FILES (/usr/local/LINUX_FILES)
    Jan 21 14:15:19 ios rpc.mountd[20012]: authenticated mount request from otw-l.compro.net:944 for /usr/local/3rdparty (/usr/local/3rdparty)
    Output from nfs client nfs.service status:
    Code:
    otw-l:/etc # systemctl status nfs.service
    nfs.service - LSB: NFS client services
       Loaded: loaded (/etc/init.d/nfs)
      Drop-In: /run/systemd/generator/nfs.service.d
               `-50-insserv.conf-$remote_fs.conf
       Active: active (running) since Mon 2014-01-20 22:33:42 CET; 15h ago
       CGroup: /system.slice/nfs.service
               `-8948 /usr/sbin/rpc.gssd -D -p /var/lib/nfs/rpc_pipefs
    
    Jan 20 22:33:41 otw-l systemd[1]: Starting LSB: NFS client services...
    Jan 20 22:33:42 otw-l nfs[8918]: Starting NFS client services: sm-notify gssd/etc/init.d/nfs: line 225: /run/nfs/nfs-rpc.gssd: No such file or directory
    Jan 20 22:33:42 otw-l nfs[8918]: ..done
    Jan 20 22:33:42 otw-l systemd[1]: Started LSB: NFS client services.
    Output from client rpcbind.service:
    Code:
    otw-l:/etc # systemctl status rpcbind.service
    rpcbind.service - RPC Bind
       Loaded: loaded (/usr/lib/systemd/system/rpcbind.service; enabled)
       Active: active (running) since Mon 2014-01-20 22:13:35 CET; 15h ago
     Main PID: 615 (rpcbind)
       CGroup: /system.slice/rpcbind.service
               `-615 /sbin/rpcbind -w -f
    
    Jan 20 22:13:35 otw-l systemd[1]: Starting RPC Bind...
    Jan 20 22:13:35 otw-l systemd[1]: Started RPC Bind.
    Thank you..

  8. #8
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    29,834

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    Quote Originally Posted by crubel View Post
    OK in this case since we are talking about a client computer and a server computer, Its important that everyone know where
    that particular data came from, so if I cannot put it in there where does it go?
    Just saying once that ios is the server and otw-l is the client should be enough.
    That is why we ask you to include the prompts.
    Henk van Velden

  9. #9

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    crubel wrote:
    > Reposting the data from my original post per the reply to my thread.
    > My apologies...I am new to posting in the forum.


    Not a criticism but you haven't shown us what is mounted. Also, I'd
    suggest trying to manually mount the problematic exports and see what is
    reported. So I'd like to see the output of

    mount

    mount -v /usr/local/LINUX_FILES

    mount -v /usr/local/3rdparty

  10. #10

    Default Re: OpenSuSE 13.1 -- nfs client only mounts first entry in fstab

    OK after doing some more checking, it appears that the NFS mounts area actually there. The linux command df is just NOT showing them as mounted.
    If I use df -a I get a good listing -- relevant lines post for clearity.
    Code:
    otw-l:/usr/local/3rdparty # df -a
    Filesystem                  1K-blocks     Used Available Use% Mounted on
    rootfs                      173232952 12353648 159806952   8% /
    /dev/sda3                   173232952 12353648 159806952   8% /
    /dev/sda1                     1035084    45272    920848   5% /boot
    host:/usr/local/muse        110218240 32838656  76355584  31% /usr/local/muse
    host:/usr/local/LINUX_FILES 110218240 32838656  76355584  31% /usr/local/LINUX_FILES
    host:/usr/local/3rdparty    110218240 32838656  76355584  31% /usr/local/3rdparty
    At any rate it appears NFS is working just the df command with no options only shows one nfs mount for some reason...

    Thank you...

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •