Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: NDAS Client Software for Linux compilation help

  1. #1

    Default NDAS Client Software for Linux compilation help

    At the following URL is some purported software with which I need help in preparing a client for my Network Attached Storage and would like for someone here to look at the offering and determine what it is that I need to do exactly to get this onto my machine. I know nothing of compiling and would appreciate some guidance on this matter. I am on 13.1 with KDE desktop and 32-bit machine.

    URL: http://www.iocellnetworks.com/neo/in...itions/drivers

    Thank you for your attention.

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,812
    Blog Entries
    15

    Default Re: NDAS Client Software for Linux compilation help

    On Sun 19 Jan 2014 04:36:01 AM CST, chuckenheimer wrote:


    At the following URL is some purported software with which I need help
    in preparing a client for my Network Attached Storage and would like for
    someone here to look at the offering and determine what it is that I
    need to do exactly to get this onto my machine. I know nothing of
    compiling and would appreciate some guidance on this matter. I am on
    13.1 with KDE desktop and 32-bit machine.

    URL:
    http://www.iocellnetworks.com/neo/in...itions/drivers

    Thank you for your attention.


    Hi
    I see the github repo for pushing to the kernel is GregKH (one of the
    openSUSE Kernel developer folks, and also a forum member).

    So what is the target system to deploy on? The Open Build Service would
    be the best option to build/deploy.

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  3. #3

    Default Re: NDAS Client Software for Linux compilation help

    Quote Originally Posted by malcolmlewis View Post
    Hi
    I see the github repo for pushing to the kernel is GregKH (one of the
    openSUSE Kernel developer folks, and also a forum member).

    So what is the target system to deploy on? The Open Build Service would
    be the best option to build/deploy.

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!
    OK, thanks for that.

    I am stuck in terminal at:

    Code:
    charles@linux-x0up:~> sudo yum install make gcc bzip2 kernel-devel rpm-build
    
    We trust you have received the usual lecture from the local System
    Administrator. It usually boils down to these three things:
    
    
        #1) Respect the privacy of others.
        #2) Think before you type.
        #3) With great power comes great responsibility.
    
    
    root's password:
    sudo: yum: command not found
    charles@linux-x0up:~> su
    Password: 
    linux-x0up:/home/charles # sudo yum install make gcc bzip2 kernel-devel rpm-build
    sudo: yum: command not found
    linux-x0up:/home/charles # cnf yum
                       
    The program 'yum' can be found in the following package:
      * yum [ path: /usr/bin/yum, repository: zypp (repo-oss) ]
    
    
    Try installing with:
        zypper install yum
    
    
    linux-x0up:/home/charles # zypper install yum
    Retrieving repository 'Packman Repository' metadata ......................[done]
    Building repository 'Packman Repository' cache ...........................[done]
    Loading repository data...
    Reading installed packages...
    Resolving package dependencies...
    
    
    The following 6 NEW packages are going to be installed:
      python-gpgme python-iniparse python-urlgrabber python-yum yum 
      yum-metadata-parser 
    
    
    6 new packages to install.
    Overall download size: 740.6 KiB. After the operation, additional 3.0 MiB will 
    be used.
    Continue? [y/n/? shows all options] (y): 
    Retrieving package python-gpgme-0.1-116.1.2.i586                 (1/6),  25.1 KiB ( 78.6 KiB unpacked)
    Retrieving: python-gpgme-0.1-116.1.2.i586.rpm ..................................................[done]
    Retrieving package yum-metadata-parser-1.1.2-126.1.3.i586        (2/6),  22.9 KiB ( 56.6 KiB unpacked)
    Retrieving: yum-metadata-parser-1.1.2-126.1.3.i586.rpm .........................................[done]
    Retrieving package python-iniparse-0.4-15.1.2.noarch             (3/6),  33.0 KiB (113.7 KiB unpacked)
    Retrieving: python-iniparse-0.4-15.1.2.noarch.rpm .................................[done (17.5 KiB/s)]
    Retrieving package python-urlgrabber-3.9.1-10.1.2.noarch         (4/6),  72.9 KiB (297.0 KiB unpacked)
    Retrieving: python-urlgrabber-3.9.1-10.1.2.noarch.rpm ..........................................[done]
    Retrieving package python-yum-3.4.3-8.1.2.i586                   (5/6), 420.6 KiB (  1.9 MiB unpacked)
    Retrieving: python-yum-3.4.3-8.1.2.i586.rpm ......................................[done (739.9 KiB/s)]
    Retrieving package yum-3.4.3-8.1.2.i586                          (6/6), 166.2 KiB (592.0 KiB unpacked)
    Retrieving: yum-3.4.3-8.1.2.i586.rpm ...........................................................[done]
    (1/6) Installing: python-gpgme-0.1-116.1.2 .....................................................[done]
    (2/6) Installing: yum-metadata-parser-1.1.2-126.1.3 ............................................[done]
    (3/6) Installing: python-iniparse-0.4-15.1.2 ...................................................[done]
    (4/6) Installing: python-urlgrabber-3.9.1-10.1.2 ...............................................[done]
    (5/6) Installing: python-yum-3.4.3-8.1.2 .......................................................[done]
    (6/6) Installing: yum-3.4.3-8.1.2 ..............................................................[done]
    Additional rpm output:
    Updating /etc/sysconfig/yum-cron...
    
    
    
    
    linux-x0up:/home/charles # sudo yum install make gcc bzip2 kernel-devel rpm-build
    There are no enabled repos.
     Run "yum repolist all" to see the repos you have.
     You can enable repos with yum-config-manager --enable <repo>
    linux-x0up:/home/charles # yum repolist all
    repolist: 0
    linux-x0up:/home/charles # sudo zypper install make gcc bzip2 kernel-devel rpm-build
    Loading repository data...
    Reading installed packages...
    'bzip2' is already installed.
    No update candidate for 'bzip2-1.0.6-26.1.21.i586'. The highest available version is already installed.
    Resolving package dependencies...
    
    
    The following 16 NEW packages are going to be installed:
      binutils gcc gcc48 gettext-tools glibc-devel kernel-desktop-devel kernel-devel libasan0 libatomic1 
      libitm1 linux-glibc-devel make patch rpm-build site-config systemd-rpm-macros 
    
    
    16 new packages to install.
    Overall download size: 26.4 MiB. After the operation, additional 111.8 MiB will be used.
    Continue? [y/n/? shows all options] (y): 
    Retrieving package binutils-2.23.2-8.1.2.i586                   (1/16),   3.6 MiB ( 21.7 MiB unpacked)
    Retrieving: binutils-2.23.2-8.1.2.i586.rpm .........................................[done (1.5 MiB/s)]
    Retrieving package gettext-tools-0.18.3.1-1.1.i586              (2/16),   2.2 MiB (  9.5 MiB unpacked)
    Retrieving: gettext-tools-0.18.3.1-1.1.i586.rpm ....................................[done (1.8 MiB/s)]
    Retrieving package libasan0-4.8.1_20130909-3.2.1.i586           (3/16),  68.6 KiB (181.8 KiB unpacked)
    Retrieving: libasan0-4.8.1_20130909-3.2.1.i586.rpm .............................................[done]
    Retrieving package libatomic1-4.8.1_20130909-3.2.1.i586         (4/16),  14.1 KiB ( 21.4 KiB unpacked)
    Retrieving: libatomic1-4.8.1_20130909-3.2.1.i586.rpm ...........................................[done]
    Retrieving package libitm1-4.8.1_20130909-3.2.1.i586            (5/16),  34.3 KiB (117.6 KiB unpacked)
    Retrieving: libitm1-4.8.1_20130909-3.2.1.i586.rpm ..............................................[done]
    Retrieving package make-3.82-160.2.1.i586                       (6/16), 355.2 KiB (  1.0 MiB unpacked)
    Retrieving: make-3.82-160.2.1.i586.rpm ...........................................[done (400.3 KiB/s)]
    Retrieving package patch-2.7.1-4.1.2.i586                       (7/16),  92.3 KiB (175.0 KiB unpacked)
    Retrieving: patch-2.7.1-4.1.2.i586.rpm .........................................................[done]
    Retrieving package site-config-0.2-5.1.2.i586                   (8/16),  11.5 KiB ( 20.7 KiB unpacked)
    Retrieving: site-config-0.2-5.1.2.i586.rpm .....................................................[done]
    Retrieving package kernel-devel-3.11.6-4.1.noarch               (9/16),   9.5 MiB ( 46.9 MiB unpacked)
    Retrieving: kernel-devel-3.11.6-4.1.noarch.rpm .....................................[done (1.5 MiB/s)]
    Retrieving package linux-glibc-devel-3.11-2.1.15.noarch        (10/16), 891.0 KiB (  3.6 MiB unpacked)
    Retrieving: linux-glibc-devel-3.11-2.1.15.noarch.rpm ..............................[done (38.7 KiB/s)]
    Retrieving package kernel-desktop-devel-3.11.6-4.1.i686        (11/16),   2.3 MiB (  2.8 MiB unpacked)
    Retrieving: kernel-desktop-devel-3.11.6-4.1.i686.rpm ...............................[done (1.3 MiB/s)]
    Retrieving package systemd-rpm-macros-2-15.1.noarch            (12/16),   4.2 KiB (  3.7 KiB unpacked)
    Retrieving: systemd-rpm-macros-2-15.1.noarch.rpm ...............................................[done]
    Retrieving package glibc-devel-2.18-4.7.1.i686                 (13/16), 619.5 KiB (  2.8 MiB unpacked)
    Retrieving: glibc-devel-2.18-4.7.1.i686.rpm .......................................[done (92.7 KiB/s)]
    Retrieving package gcc48-4.8.1_20130909-3.2.1.i586             (14/16),   6.8 MiB ( 23.0 MiB unpacked)
    Retrieving: gcc48-4.8.1_20130909-3.2.1.i586.rpm ....................................[done (1.4 MiB/s)]
    Retrieving package gcc-4.8-2.1.2.i586                            (15/16),   4.8 KiB (    0 B unpacked)
    Retrieving: gcc-4.8-2.1.2.i586.rpm .............................................................[done]
    Retrieving package rpm-build-4.11.1-6.5.1.i586                 (16/16),  30.2 KiB ( 18.8 KiB unpacked)
    Retrieving: rpm-build-4.11.1-6.5.1.i586.rpm .......................................[done (28.7 KiB/s)]
    ( 1/16) Installing: binutils-2.23.2-8.1.2 ......................................................[done]
    Additional rpm output:
    update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode
    
    
    
    
    ( 2/16) Installing: gettext-tools-0.18.3.1-1.1 .................................................[done]
    ( 3/16) Installing: libasan0-4.8.1_20130909-3.2.1 ..............................................[done]
    ( 4/16) Installing: libatomic1-4.8.1_20130909-3.2.1 ............................................[done]
    ( 5/16) Installing: libitm1-4.8.1_20130909-3.2.1 ...............................................[done]
    ( 6/16) Installing: make-3.82-160.2.1 ..........................................................[done]
    ( 7/16) Installing: patch-2.7.1-4.1.2 ..........................................................[done]
    ( 8/16) Installing: site-config-0.2-5.1.2 ......................................................[done]
    ( 9/16) Installing: kernel-devel-3.11.6-4.1 ....................................................[done]
    (10/16) Installing: linux-glibc-devel-3.11-2.1.15 ..............................................[done]
    (11/16) Installing: kernel-desktop-devel-3.11.6-4.1 ............................................[done]
    (12/16) Installing: systemd-rpm-macros-2-15.1 ..................................................[done]
    (13/16) Installing: glibc-devel-2.18-4.7.1 .....................................................[done]
    (14/16) Installing: gcc48-4.8.1_20130909-3.2.1 .................................................[done]
    (15/16) Installing: gcc-4.8-2.1.2 ..............................................................[done]
    (16/16) Installing: rpm-build-4.11.1-6.5.1 .....................................................[done]
    linux-x0up:/home/charles #
    am unsure how to proceed from this point. I am trying to understand the instructions but am blindly bumping around at this point. Can you elucidate further for me please?

  4. #4
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,812
    Blog Entries
    15

    Default Re: NDAS Client Software for Linux compilation help

    On Sun 19 Jan 2014 05:56:01 AM CST, chuckenheimer wrote:


    malcolmlewis;2617334 Wrote:
    > Hi
    > I see the github repo for pushing to the kernel is GregKH (one of the
    > openSUSE Kernel developer folks, and also a forum member).
    >
    > So what is the target system to deploy on? The Open Build Service
    > would be the best option to build/deploy.
    >
    > --
    > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    > openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    > If you find this post helpful and are logged into the web interface,
    > please show your appreciation and click on the star below... Thanks!


    OK, thanks for that.

    I am stuck in terminal at:


    Code:
    --------------------
    charles@linux-x0up:~> sudo yum install make gcc bzip2 kernel-devel
    rpm-build
    We trust you have received the usual lecture from the local System
    Administrator. It usually boils down to these three things:


    #1) Respect the privacy of others.
    #2) Think before you type.
    #3) With great power comes great responsibility.


    root's password:
    sudo: yum: command not found
    charles@linux-x0up:~> su
    Password:
    linux-x0up:/home/charles # sudo yum install make gcc bzip2
    kernel-devel rpm-build sudo: yum: command not found
    linux-x0up:/home/charles # cnf yum

    The program 'yum' can be found in the following package:
    * yum [ path: /usr/bin/yum, repository: zypp (repo-oss) ]


    Try installing with:
    zypper install yum


    linux-x0up:/home/charles # zypper install yum
    Retrieving repository 'Packman Repository'
    metadata ......................[done] Building repository 'Packman
    Repository' cache ...........................[done] Loading repository
    data... Reading installed packages...
    Resolving package dependencies...


    The following 6 NEW packages are going to be installed:
    python-gpgme python-iniparse python-urlgrabber python-yum yum
    yum-metadata-parser


    6 new packages to install.
    Overall download size: 740.6 KiB. After the operation, additional 3.0
    MiB will be used.
    Continue? [y/n/? shows all options] (y):
    Retrieving package python-gpgme-0.1-116.1.2.i586
    (1/6), 25.1 KiB ( 78.6 KiB unpacked) Retrieving:
    python-gpgme-0.1-116.1.2.i586.rpm ..................................................[done]
    Retrieving package yum-metadata-parser-1.1.2-126.1.3.i586
    (2/6), 22.9 KiB ( 56.6 KiB unpacked) Retrieving:
    yum-metadata-parser-1.1.2-126.1.3.i586.rpm .........................................[done]
    Retrieving package python-iniparse-0.4-15.1.2.noarch
    (3/6), 33.0 KiB (113.7 KiB unpacked) Retrieving:
    python-iniparse-0.4-15.1.2.noarch.rpm .................................[done
    (17.5 KiB/s)] Retrieving package
    python-urlgrabber-3.9.1-10.1.2.noarch (4/6), 72.9 KiB (297.0
    KiB unpacked) Retrieving:
    python-urlgrabber-3.9.1-10.1.2.noarch.rpm ..........................................[done]
    Retrieving package python-yum-3.4.3-8.1.2.i586 (5/6),
    420.6 KiB ( 1.9 MiB unpacked) Retrieving:
    python-yum-3.4.3-8.1.2.i586.rpm ......................................[done
    (739.9 KiB/s)] Retrieving package
    yum-3.4.3-8.1.2.i586 (6/6), 166.2 KiB (592.0
    KiB unpacked) Retrieving:
    yum-3.4.3-8.1.2.i586.rpm ...........................................................[done]
    (1/6) Installing:
    python-gpgme-0.1-116.1.2 .....................................................[done]
    (2/6) Installing:
    yum-metadata-parser-1.1.2-126.1.3 ............................................[done]
    (3/6) Installing:
    python-iniparse-0.4-15.1.2 ...................................................[done]
    (4/6) Installing:
    python-urlgrabber-3.9.1-10.1.2 ...............................................[done]
    (5/6) Installing:
    python-yum-3.4.3-8.1.2 .......................................................[done]
    (6/6) Installing:
    yum-3.4.3-8.1.2 ..............................................................[done]
    Additional rpm output: Updating /etc/sysconfig/yum-cron...
    linux-x0up:/home/charles # sudo yum install make gcc bzip2 kernel-devel
    rpm-build There are no enabled repos. Run "yum repolist all" to see the
    repos you have. You can enable repos with yum-config-manager --enable
    <repo> linux-x0up:/home/charles # yum repolist all repolist: 0
    linux-x0up:/home/charles # sudo zypper install make gcc bzip2
    kernel-devel rpm-build Loading repository data... Reading installed
    packages... 'bzip2' is already installed. No update candidate for
    'bzip2-1.0.6-26.1.21.i586'. The highest available version is already
    installed. Resolving package dependencies... The following 16 NEW
    packages are going to be installed: binutils gcc gcc48 gettext-tools
    glibc-devel kernel-desktop-devel kernel-devel libasan0 libatomic1
    libitm1 linux-glibc-devel make patch rpm-build site-config
    systemd-rpm-macros 16 new packages to install. Overall download size:
    26.4 MiB. After the operation, additional 111.8 MiB will be used.
    Continue? [y/n/? shows all options] (y): Retrieving package
    binutils-2.23.2-8.1.2.i586 (1/16), 3.6 MiB ( 21.7
    MiB unpacked) Retrieving:
    binutils-2.23.2-8.1.2.i586.rpm .........................................[done
    (1.5 MiB/s)] Retrieving package
    gettext-tools-0.18.3.1-1.1.i586 (2/16), 2.2 MiB ( 9.5
    MiB unpacked) Retrieving:
    gettext-tools-0.18.3.1-1.1.i586.rpm ....................................[done
    (1.8 MiB/s)] Retrieving package
    libasan0-4.8.1_20130909-3.2.1.i586 (3/16), 68.6 KiB (181.8
    KiB unpacked) Retrieving:
    libasan0-4.8.1_20130909-3.2.1.i586.rpm .............................................[done]
    Retrieving package libatomic1-4.8.1_20130909-3.2.1.i586
    (4/16), 14.1 KiB ( 21.4 KiB unpacked) Retrieving:
    libatomic1-4.8.1_20130909-3.2.1.i586.rpm ...........................................[done]
    Retrieving package libitm1-4.8.1_20130909-3.2.1.i586
    (5/16), 34.3 KiB (117.6 KiB unpacked) Retrieving:
    libitm1-4.8.1_20130909-3.2.1.i586.rpm ..............................................[done]
    Retrieving package make-3.82-160.2.1.i586 (6/16),
    355.2 KiB ( 1.0 MiB unpacked) Retrieving:
    make-3.82-160.2.1.i586.rpm ...........................................[done
    (400.3 KiB/s)] Retrieving package
    patch-2.7.1-4.1.2.i586 (7/16), 92.3 KiB (175.0
    KiB unpacked) Retrieving:
    patch-2.7.1-4.1.2.i586.rpm .........................................................[done]
    Retrieving package site-config-0.2-5.1.2.i586
    (8/16), 11.5 KiB ( 20.7 KiB unpacked) Retrieving:
    site-config-0.2-5.1.2.i586.rpm .....................................................[done]
    Retrieving package kernel-devel-3.11.6-4.1.noarch
    (9/16), 9.5 MiB ( 46.9 MiB unpacked) Retrieving:
    kernel-devel-3.11.6-4.1.noarch.rpm .....................................[done
    (1.5 MiB/s)] Retrieving package
    linux-glibc-devel-3.11-2.1.15.noarch (10/16), 891.0 KiB ( 3.6
    MiB unpacked) Retrieving:
    linux-glibc-devel-3.11-2.1.15.noarch.rpm ..............................[done
    (38.7 KiB/s)] Retrieving package
    kernel-desktop-devel-3.11.6-4.1.i686 (11/16), 2.3 MiB ( 2.8
    MiB unpacked) Retrieving:
    kernel-desktop-devel-3.11.6-4.1.i686.rpm ...............................[done
    (1.3 MiB/s)] Retrieving package
    systemd-rpm-macros-2-15.1.noarch (12/16), 4.2 KiB ( 3.7
    KiB unpacked) Retrieving:
    systemd-rpm-macros-2-15.1.noarch.rpm ...............................................[done]
    Retrieving package glibc-devel-2.18-4.7.1.i686 (13/16),
    619.5 KiB ( 2.8 MiB unpacked) Retrieving:
    glibc-devel-2.18-4.7.1.i686.rpm .......................................[done
    (92.7 KiB/s)] Retrieving package
    gcc48-4.8.1_20130909-3.2.1.i586 (14/16), 6.8 MiB ( 23.0
    MiB unpacked) Retrieving:
    gcc48-4.8.1_20130909-3.2.1.i586.rpm ....................................[done
    (1.4 MiB/s)] Retrieving package
    gcc-4.8-2.1.2.i586 (15/16), 4.8 KiB ( 0
    B unpacked) Retrieving:
    gcc-4.8-2.1.2.i586.rpm .............................................................[done]
    Retrieving package rpm-build-4.11.1-6.5.1.i586
    (16/16), 30.2 KiB ( 18.8 KiB unpacked) Retrieving:
    rpm-build-4.11.1-6.5.1.i586.rpm .......................................[done
    (28.7 KiB/s)] ( 1/16) Installing:
    binutils-2.23.2-8.1.2 ......................................................[done]
    Additional rpm output: update-alternatives: using /usr/bin/ld.bfd to
    provide /usr/bin/ld (ld) in auto mode ( 2/16) Installing:
    gettext-tools-0.18.3.1-1.1 .................................................[done]
    ( 3/16) Installing:
    libasan0-4.8.1_20130909-3.2.1 ..............................................[done]
    ( 4/16) Installing:
    libatomic1-4.8.1_20130909-3.2.1 ............................................[done]
    ( 5/16) Installing:
    libitm1-4.8.1_20130909-3.2.1 ...............................................[done]
    ( 6/16) Installing:
    make-3.82-160.2.1 ..........................................................[done]
    ( 7/16) Installing:
    patch-2.7.1-4.1.2 ..........................................................[done]
    ( 8/16) Installing:
    site-config-0.2-5.1.2 ......................................................[done]
    ( 9/16) Installing:
    kernel-devel-3.11.6-4.1 ....................................................[done]
    (10/16) Installing:
    linux-glibc-devel-3.11-2.1.15 ..............................................[done]
    (11/16) Installing:
    kernel-desktop-devel-3.11.6-4.1 ............................................[done]
    (12/16) Installing:
    systemd-rpm-macros-2-15.1 ..................................................[done]
    (13/16) Installing:
    glibc-devel-2.18-4.7.1 .....................................................[done]
    (14/16) Installing:
    gcc48-4.8.1_20130909-3.2.1 .................................................[done]
    (15/16) Installing:
    gcc-4.8-2.1.2 ..............................................................[done]
    (16/16) Installing:
    rpm-build-4.11.1-6.5.1 .....................................................[done]
    linux-x0up:/home/charles # --------------------


    am unsure how to proceed from this point. I am trying to understand the
    instructions but am blindly bumping around at this point. Can you
    elucidate further for me please?


    Hi
    Ugh! yum is a RH/Fedora/Centos thing, no need to use in openSUSE,
    zypper works fine.....

    Just follow the instructions here?
    https://github.com/iocellnetworks/nd...es-from-source

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  5. #5

    Default Re: NDAS Client Software for Linux compilation help

    I used zypper and got through as shown in my code information in the previous post. I at least had sense enough to try zypper when yum failed but believe I installed yum anyway without understanding what I was doing.

    I'm really bumping around here with those instructions not knowing how to follow them properly. I tried this:

    Code:
    charles@linux-x0up:~/Downloads> su
    Password: 
    linux-x0up:/home/charles/Downloads # rpmbuild -tb ndas-3.7.9.x86.tar.gz
    sh: 1: command not found
    error: line 202: Empty tag: Release:
    linux-x0up:/home/charles/Downloads #
    but didn't get very far. Am I using the right tarball for what I need to do? Thanks for staying with me on this!

  6. #6

    Default Re: NDAS Client Software for Linux compilation help

    I reread the instructions (I had another set of them in a separate tab in my browser) correctly and tried the following:

    Code:
    linux-x0up:/home/charles/Downloads # tar zxvf 3.7.9.x86.tar.gz
    tar (child): 3.7.9.x86.tar.gz: Cannot open: No such file or directory
    tar (child): Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error is not recoverable: exiting now
    linux-x0up:/home/charles/Downloads #
    but again didn't get far. What am I doing wrong? Thanks!

  7. #7

    Default Re: NDAS Client Software for Linux compilation help

    Tried this:

    Code:
    linux-x0up:/home/charles/Downloads/ndas-3.7.9.x86 # make
    Invoking make against the kernel at /usr/src/linux
    make -C /usr/src/linux \
            SUBDIRS=/home/charles/Downloads/ndas-3.7.9.x86 \
            KBUILD_VERBOSE=1 \
            ndas_root=/home/charles/Downloads/ndas-3.7.9.x86 \
            modules
    make[1]: Entering directory `/usr/src/linux-3.11.6-4'
    test -e include/generated/autoconf.h -a -e include/config/auto.conf || (                \
    echo >&2;                                                       \
    echo >&2 "  ERROR: Kernel configuration is invalid.";           \
    echo >&2 "         include/generated/autoconf.h or include/config/auto.conf are missing.";\
    echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";      \
    echo >&2 ;                                                      \
    /bin/false)
    
      ERROR: Kernel configuration is invalid.
             include/generated/autoconf.h or include/config/auto.conf are missing.
             Run 'make oldconfig && make prepare' on kernel src to fix it.
    
    mkdir -p /home/charles/Downloads/ndas-3.7.9.x86/.tmp_versions ; rm -f /home/charles/Downloads/ndas-3..9.x86/.tmp_versions/*
    
      WARNING: Symbol version dump /usr/src/linux-3.11.6-4/Module.symvers
               is missing; modules will have no dependencies and modversions.
    
    make -f scripts/Makefile.build obj=/home/charles/Downloads/ndas-3.7.9.x86
    (cat /dev/null; ) > /home/charles/Downloads/ndas-3.7.9.x86/modules.order
    make -f /usr/src/linux-3.11.6-4/scripts/Makefile.modpost
    /usr/src/linux-3.11.6-4/scripts/Makefile.modpost:42: include/config/auto.conf: No such file or directry
    make[2]: *** No rule to make target `include/config/auto.conf'.  Stop.
    make[1]: *** [modules] Error 2
    make[1]: Leaving directory `/usr/src/linux-3.11.6-4'
    make: *** [/home/charles/Downloads/ndas-3.7.9.x86/ndas_sal.ko] Error 2
    linux-x0up:/home/charles/Downloads/ndas-3.7.9.x86 # sudo make install
    install -d -m 755 /lib/modules/3.11.10-10.gb897c7d-desktop/kernel/drivers/block/ndas
    install -m 644 /home/charles/Downloads/ndas-3.7.9.x86/ndas_sal.ko /lib/modules/3.11.10-10.gb897c7d-dektop/kernel/drivers/block/ndas
    install: cannot stat ‘/home/charles/Downloads/ndas-3.7.9.x86/ndas_sal.ko’: No such file or directory
    make: *** [install-kernel-modules] Error 1
    Don't know what I'm doing. Sorry. I'm exasperated. Hope you're still around.

  8. #8
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,812
    Blog Entries
    15

    Default Re: NDAS Client Software for Linux compilation help

    On Sun 19 Jan 2014 07:46:01 AM CST, chuckenheimer wrote:

    Don't know what I'm doing. Sorry. I'm exasperated. Hope you're still
    around.
    Hi
    I am I'll have a play here with it to see what's up.....

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  9. #9

    Default Re: NDAS Client Software for Linux compilation help

    Quote Originally Posted by malcolmlewis View Post
    Hi
    I am I'll have a play here with it to see what's up.....

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!
    Great!. I'm feeling better after some sleep, too.

    I'm thinking it's the newest kernel that I'm using isn't playing well with the make command. I don't really know what's up but that's what I'm of the opinion it is and I need somehow to include something in that process which will let the make complete properly.

    Looking forward to your results in that I will then be able to access my NAS on the network until I learn how to complete the samba networking magic which I am ultimately wanting to be able to accomplish. All in good time. Thanks again for your hand holding.

  10. #10
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,812
    Blog Entries
    15

    Default Re: NDAS Client Software for Linux compilation help

    On Sun 19 Jan 2014 04:26:01 PM CST, chuckenheimer wrote:


    malcolmlewis;2617458 Wrote:
    > Hi
    > I am I'll have a play here with it to see what's up.....
    >
    > --
    > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    > openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    > If you find this post helpful and are logged into the web interface,
    > please show your appreciation and click on the star below... Thanks!


    Great!. I'm feeling better after some sleep, too.

    I'm thinking it's the newest kernel that I'm using isn't playing well
    with the make command. I don't really know what's up but that's what I'm
    of the opinion it is and I need somehow to include something in that
    process which will let the make complete properly.

    Looking forward to your results in that I will then be able to access my
    NAS on the network until I learn how to complete the samba networking
    magic which I am ultimately wanting to be able to accomplish. All in
    good time. Thanks again for your hand holding.


    Hi
    Had a small play with it, to be honest it's a rabbit warren trying to
    figure what they are up to.....

    I'll still play around, but can you send a PM to user gregkh and
    describing your use case and ask him if this is moving forward on the
    kernel side as it would be nice to know if his github version is up
    with the current 3.11 kernel.

    Also the lifetime of the 32bit kernel is on the decline, surprised they
    aren't producing a 64bit one....

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.2 Kernel 3.11.6-4-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •