Results 1 to 3 of 3

Thread: Audio stopped working. Config info inside.

  1. #1

    Default Audio stopped working. Config info inside.

    It's been a long time since I've run Linux, so bare with me. Audio was working and then I had a buzz that would not go away, muted sound then un-muted and now I get nothing.

    Ran: /usr/sbin/alsa-info.shResults are here:
    http://www.alsa-project.org/db/?f=41...364904202d26c1

    Been following along with the SDB:Audio_troubleshooting guide and so far nothing has worked.

    Any ideas?

  2. #2
    Join Date
    Mar 2008
    Location
    Phuket, Thailand
    Posts
    27,109
    Blog Entries
    40

    Default Re: Audio stopped working. Config info inside.

    Quote Originally Posted by JesterDev View Post
    It's been a long time since I've run Linux, so bare with me. Audio was working and then I had a buzz that would not go away, muted sound then un-muted and now I get nothing.

    Ran: /usr/sbin/alsa-info.shResults are here:
    http://www.alsa-project.org/db/?f=41...364904202d26c1

    Been following along with the SDB:Audio_troubleshooting guide and so far nothing has worked.

    Any ideas?
    The audio is still muted according to the script.

    Code:
    !!Amixer output
    !!-------Mixer controls for card 0 [PCH]
    
    Card hw:0 'PCH'/'HDA Intel PCH at 0xc9400000 irq 53'
      Mixer name    : 'Intel CougarPoint HDMI'
    Simple mixer control 'Master',0
      Mono: Playback 127 [100%] [0.00dB] [off]
    Simple mixer control 'Headphone',0
      Front Left: Playback 0 [0%] [-95.25dB] [off]
      Front Right: Playback 0 [0%] [-95.25dB] [off]
    Simple mixer control 'Headphone',1
      Front Left: Playback 127 [100%] [0.00dB] [on]
      Front Right: Playback 127 [100%] [0.00dB] [on]
    Simple mixer control 'Speaker',0
      Front Left: Playback 127 [100%] [0.00dB] [off]
      Front Right: Playback 127 [100%] [0.00dB] [off]
    Simple mixer control 'PCM',0
      Front Left: Playback 255 [100%] [0.00dB]
      Front Right: Playback 255 [100%] [0.00dB]
    Please note what is highlighted in red, especially the 'Master" volume control. That needs to be switched ON. Switching on the 'Speaker' is also likely necessary.

    If you can't figure out how to do this with kmix (assuming a kde desktop) then you could try alsa mixer.

    I need to rush to work, so I can't provide the 'amixer' commands, but if all else fails then tonight or on the weekend I could provide the amixer commands (to unmute). But its a simple matter to unmute with a mixer so hopefully you don't need to wait for me to provide the commands.

    Thankyou, best wishes, and good luck.

    Edit - and I note the above first openSUSE forum post. Let me say WELCOME to our forum.

  3. #3
    Join Date
    May 2010
    Location
    Space Colony Lagrange Point 22° à, 77° Ƅ, 56° ɤ, 99° ɜ
    Posts
    3,166

    Default Re: Audio stopped working. Config info inside.

    JesterDev wrote:
    >
    > It's been a long time since I've run Linux, so bare with me. Audio was
    > working and then I had a buzz that would not go away, muted sound then
    > un-muted and now I get nothing.
    >
    > Ran: /usr/sbin/alsa-info.shResults are here:
    > http://tinyurl.com/o4ozu7y
    >
    > Been following along with the SDB:Audio_troubleshooting guide and so far
    > nothing has worked.
    >
    > Any ideas?
    >
    >

    What is sound level in
    YaST ==>Sound==>Other==>Volume

    --
    GNOME 3.10.2
    openSUSE 13.1 (Bottle) (x86_64) 64-bit
    Kernel Linux 3.11.6-4-desktop

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •