Results 1 to 2 of 2

Thread: build pegasus scribble

  1. #1
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    436

    Default build pegasus scribble

    hi

    i try to build this software: Pegasus Scribble, because there is not available in the suse repository.

    pegasus_usb.c:700:21: warning: variable ‘pressure’ set but not used [-Wunused-but-set-variable]
    gcc -I. -g -Wall -pthread -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/libpng15 -I/usr/include/harfbuzz -I/usr/include/poppler/glib -I/usr/include/poppler -Ilibusb-1.0 -IXtst -o utils.o -c utils.c
    gcc -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lpango-1.0 -lfreetype -lfontconfig -lgthread-2.0 -lpoppler-glib -lgio-2.0 -lcairo -lgobject-2.0 -lglib-2.0 -lusb-1.0 -lXtst -o pegasus-scribble systray.o pegasus_scribble.o cursor.o application.o document.o scribble.o pegasus_usb.o utils.o
    /usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: /usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../lib64/libgtk-x11-2.0.so: référence au symbole non défini «XFlush»
    /usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: note: «XFlush» is defined in DSO /usr/lib64/libX11.so.6 so try adding it to the linker command line
    /usr/lib64/libX11.so.6: could not read symbols: Invalid operation
    collect2: error: ld returned 1 exit status
    make: *** [pegasus-scribble] error

    makefile is:

    #
    # Makefile
    #


    SHELL = /bin/sh
    srcdir = .




    .SUFFIXES:
    .SUFFIXES: .c .o


    OPT=-g -O


    CC = gcc
    PKG_CONFIG = /usr/bin/pkg-config
    PEGASUS_LIBS = -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lpango-1.0 -lfreetype -lfontconfig -lgthread-2.0 -lpoppler-glib -lgio-2.0 -lcairo -lgobject-2.0 -lglib-2.0 -lusb-1.0 -lXtst
    PEGASUS_CFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/libpng15 -I/usr/include/harfbuzz -I/usr/include/poppler/glib -I/usr/include/poppler -Ilibusb-1.0 -IXtst
    CFLAGS = -I. -g -Wall $(PEGASUS_CFLAGS)
    LDFLAGS = $(PEGASUS_LIBS)
    INSTALL = /usr/bin/install -c
    prefix = /usr
    exec_prefix = ${prefix}
    bindir = ${exec_prefix}/bin
    mandir = ${prefix}/share/man
    man1dir = $(mandir)/man1
    icondir = $(prefix)/share/$(PROG)/icons
    version = 0.4.0




    SOURCES = $(wildcard *.c)
    OBJS=$(patsubst %.c, %.o, $(SOURCES))
    COMMIT = $(shell cat .git/refs/heads/master)
    PROG = pegasus-scribble


    all: $(PROG)


    install: all
    ./mkinstalldirs $(DEST)/$(bindir)
    ./mkinstalldirs $(DEST)/$(icondir)
    ./mkinstalldirs $(DEST)/$(man1dir)
    $(INSTALL) -m 0644 icons/* $(DEST)/$(icondir)
    $(INSTALL) -m 0755 $(PROG) $(DEST)/$(bindir)
    $(INSTALL) -m 0644 pegasus-scribble.1 $(DEST)/$(man1dir)


    uninstall:
    /bin/rm -f $(DEST)/$(bindir)/$(PROG)
    /bin/rm -rf $(DEST)/$(prefix)/share/$(PROG)
    /bin/rm -rf $(DEST)/$(man1dir)/pegasus-scribble.1




    $(PROG): $(OBJS)
    $(CC) $(LDFLAGS) -o $@ $^


    %.o: %.c %.h
    $(CC) $(CFLAGS) -o $@ -c $<


    clean:
    /bin/rm -f pegasus-scribble $(OBJS)


    distclean: clean
    /bin/rm -f Makefile config.h config.status config.cache config.log


    new_version:
    test ! -d dist || rm -rf dist
    dir=pegasus-scribble-$(version) && \
    mkdir -p dist/$$dir && \
    cp *.h dist/$$dir && \
    cp *.c dist/$$dir && \
    cp pegasus-scribble.1 dist/$$dir && \
    cp -r www/ dist/$$dir && \
    cp -r icons/ dist/$$dir && \
    cp Makefile.in dist/$$dir && \
    cp configure dist/$$dir && \
    cp config.h.in dist/$$dir && \
    cp mkinstalldirs dist/$$dir && \
    cp install-sh dist/$$dir && \
    rm dist/$$dir/config.h && \
    (cd dist/ && tar -zcf ../$$dir.tar.gz $$dir/) && rm -rf dist/


    dist-source:
    test ! -d dist || rm -rf dist
    commit=`cat .git/refs/heads/master | sed -e 's/\(........\).*/\1/'` && \
    dir=pegasus-scribble-$$commit && \
    mkdir -p dist/$$dir && \
    cp *.h dist/$$dir && \
    cp *.c dist/$$dir && \
    cp pegasus-scribble.1 dist/$$dir && \
    cp -r www/ dist/$$dir && \
    cp -r icons/ dist/$$dir && \
    cp Makefile.in dist/$$dir && \
    cp configure dist/$$dir && \
    cp config.h.in dist/$$dir && \
    cp mkinstalldirs dist/$$dir && \
    cp install-sh dist/$$dir && \
    rm dist/$$dir/config.h && \
    (cd dist/ && tar -zcf ../$$dir.tar.gz $$dir/) && rm -rf dist/

    seem like a ld problem?


    to build system is

    /configure --prefix=/usr
    ~$ make
    ~# make install
    if we are able to get it working, that could be interesting to create a rpm...
    www.laboiteaprog.com

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,520
    Blog Entries
    15

    Default Re: build pegasus scribble

    On Sun 08 Dec 2013 01:56:02 PM CST, collinm wrote:


    hi

    i try to build this software: 'Pegasus Scribble'
    (http://pegasusscribble.sourceforge.net/), because there is not
    available in the suse repository.
    Hi
    You need to use code tags when pasting text

    So the error is here;
    Code:
    note: «XFlush» is defined in DSO /usr/lib64/libX11.so.6 so try adding it to the linker command line
    So you need to add -lX11 to the PEGASUS_LIBS line at the end....

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SLED 11 SP3 (x86_64) GNOME 2.28.0 Kernel 3.0.101-0.8-default
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •