I have installed the new Suse and I get no sound (tested with YAST) I have the following integrated sound cards ,according to YAST Hardware information 24: PCI 1b.0: 0403 Audio device [Created at pci.319] Unique ID: u1Nb.H44og5uzQW4 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: “Intel Audio device” Vendor: pci 0x8086 “Intel Corporation” Device: pci 0x1e20 SubVendor: pci 0x1458 “Giga-byte Technology” SubDevice: pci 0xa002 Revision: 0x04 Driver: “snd_hda_intel” Driver Modules: “snd_hda_intel” Memory Range: 0xf7210000-0xf7213fff (rw,non-prefetchable) IRQ: 45 (13110 events) Module Alias: “pci:v00008086d00001E20sv00001458sd0000A002bc04sc03i00” Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: “modprobe snd_hda_intel” Config Status: cfg=yes, avail=yes, need=no, active=unknown 34: PCI 100.1: 0403 Audio device [Created at pci.319] Unique ID: NXNs.PtmuUVdG+v2 Parent ID: vSkL.pCz0kNFNqf6 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: sound Model: “nVidia Audio device” Vendor: pci 0x10de “nVidia Corporation” Device: pci 0x0be3 SubVendor: pci 0x1458 “Giga-byte Technology” SubDevice: pci 0x3530 Revision: 0xa1 Driver: “snd_hda_intel” Driver Modules: “snd_hda_intel” Memory Range: 0xf7080000-0xf7083fff (rw,non-prefetchable) IRQ: 17 (294 events) Module Alias: “pci:v000010DEd00000BE3sv00001458sd00003530bc04sc03i00” Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: “modprobe snd_hda_intel” Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #20 (PCI bridge) The Pc is a dual-system (Windows 7 and Suse 13.1). The sound works perfectly in Windows and has also worked perfectly so far in Suse 12.3. Any ideas will be appreciated
Sorry, I do not know how you got this post composed like this, but this is next to unreadable. Can you please add some new lines on relevant places. And when there is computer output involved, please use CODE tags around it (the # button in the tool bar of the post editor).
Now I got the system working with Amarok, but with no other player (Vlc , Mplayer Sm Player). All the codecs are loaded so far. All is very strange
Try to turn PulseAudio on or off.
YaST->Hardware->Sound->Other->PulseAudio Configuration
This so much. I had sound issues, disabled pulse and now everything works as it should 
After dowloading the latest patches via Yast everythink works fine
Thanks guys