Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: 12.3 wont boot up after an upgrade.

  1. #11
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: 12.3 wont boot up after an upgrade.

    On 2013-06-16 19:36, morbidwar wrote:
    >
    > Hello Carlos, right now I'm running 12.1
    >
    >
    > Code:
    > --------------------
    > linux-8xwg:/home/ovidiu # file -s /dev/md0
    > /dev/md0: Linux rev 1.0 ext4 filesystem data, UUID=aa09132b-e405-4399-b3c7-ee50f2657516 (needs journal recovery) (extents) (large files) (huge files)
    > linux-8xwg:/home/ovidiu # file -s /dev/md1
    > /dev/md1: Linux rev 1.0 ext4 filesystem data, UUID=89566f6e-a050-4aad-9f53-7daa07c48364 (needs journal recovery) (extents) (large files) (huge files)
    > linux-8xwg:/home/ovidiu # file -s /dev/md2
    > /dev/md2: Linux/i386 swap file (new style), version 1 (4K pages), size 1049071 pages, no label, UUID=68ce2e54-71cf-4cc7-a013-f8bc5d37adbc
    > --------------------


    Good.

    >
    > after that:
    >
    > Code:
    > --------------------
    > linux-8xwg:/home/ovidiu # e2fsck /dev/md1
    > e2fsck 1.41.14 (22-Dec-2010)
    > /dev/md1: recovering journal
    > /dev/md1: clean, 436804/59940864 files, 111695528/239733982 blocks
    > --------------------


    Good. You also need the same on md0, both need journal recovery.

    >
    > but the same thing
    >
    > Code:
    > --------------------
    > Disk /dev/md1: 982.0 GB, 981950390272 bytes
    > 2 heads, 4 sectors/track, 239733982 cylinders, total 1917871856 sectors
    > Units = sectors of 1 * 512 = 512 bytes
    > Sector size (logical/physical): 512 bytes / 512 bytes
    > I/O size (minimum/optimal): 512 bytes / 512 bytes
    > Disk identifier: 0x00000000
    >
    > Disk /dev/md1 doesn't contain a valid partition table
    > --------------------


    That's not an error, it is just information :-)

    It is possible to partition a raid partition. You haven't done it, and
    that is normal.


    --
    Cheers / Saludos,

    Carlos E. R.
    (from 12.3 x86_64 "Dartmouth" at Telcontar)

  2. #12
    Join Date
    Aug 2009
    Location
    Romania
    Posts
    35

    Default Re: 12.3 wont boot up after an upgrade.

    Hello Carlos, right now I finished to copy all my data to the external storage. It taked long because the system from time to time gave me errors. And if the copy folder exceeded 10GB the system hatled with error. But in the end every file was saved.






    i will format the drives with low level format. But right now I will wait to see whos fault was. It was the kernel update, the software raid, the drives... a lot of questions rised after this incident.
    openSUSE 12.3 | Intel C2D | 4G DDR2 ECC | KDE 4.9
    http://oc.masteraffairs.ro

  3. #13
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: 12.3 wont boot up after an upgrade.

    On 2013-06-17 11:56, morbidwar wrote:
    >
    > Hello Carlos, right now I finished to copy all my data to the external
    > storage. It taked long because the system from time to time gave me
    > errors. And if the copy folder exceeded 10GB the system hatled with
    > error. But in the end every file was saved.
    >
    > [image:
    > https://lh3.googleusercontent.com/-P...16_152856.jpg]


    The kernel is Oopsing.

    > i will format the drives with low level format.


    Why low level?

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 12.3 x86_64 "Dartmouth" at Telcontar)

  4. #14
    Join Date
    Aug 2009
    Location
    Romania
    Posts
    35

    Default Re: 12.3 wont boot up after an upgrade.

    Hello Carlos, well I will format the drives with low level because I want to be sure that the surface is OK, even if the surface test went OK with no errors. But I don't understand why the kernel is "oopsing" is something wrong with my hardware? or the partition table isn't ok on the disk? The software-raid was made during openSuSE installation, end everything went ok.
    Thank you for your time and support.
    Best regards
    Ovidiu
    openSUSE 12.3 | Intel C2D | 4G DDR2 ECC | KDE 4.9
    http://oc.masteraffairs.ro

  5. #15
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: 12.3 wont boot up after an upgrade.

    On 2013-06-17 18:06, morbidwar wrote:
    >
    > But I don't understand why the kernel is "oopsing" is
    > something wrong with my hardware?


    Impossible to know, letter is too small and text is incomplete.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 12.3 x86_64 "Dartmouth" at Telcontar)

  6. #16
    Join Date
    Aug 2009
    Location
    Romania
    Posts
    35

    Smile Re: 12.3 wont boot up after an upgrade.

    So I come back with an update. After installing Debian on the same computer I noticed some strange errors in the /var/log/messages regarding memory module B0 and after a deep investigation I found out that one of my memory modules was broken and the correction module inside the memory was trying to repair the problems. The problem I clear now, but what I don't understand why the file system was affected?
    Thank you for your support.
    openSUSE 12.3 | Intel C2D | 4G DDR2 ECC | KDE 4.9
    http://oc.masteraffairs.ro

  7. #17
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,999

    Default Re: 12.3 wont boot up after an upgrade.

    Any memory problem is a real problem. Each OS uses memory in a different way so some may not run into the bad memory at first others may put an important system file flat at the bad memory thus breaking the program.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •