Results 1 to 2 of 2

Thread: Broadcom firmware is needed for b43, but I have no network - an easierwork around

  1. #1
    Join Date
    Jun 2008
    Location
    Kansas City Area, Missouri, USA
    Posts
    7,235

    Default Broadcom firmware is needed for b43, but I have no network - an easierwork around

    Unfortunately, Broadcom does not allow the redistribution of the firmware needed
    to operate its wireless cards that use b43 or b43legacy as a driver.

    This situation is merely an annoyance when the Linux system has some other means
    of connecting to the network; openSUSE contains a special script that downloads
    files that contain the firmware and uses the utility b43-fwcutter to extract the
    necessary files. The files that are downloaded can be redistributed, but their
    12 MB size precludes them from being included in openSUSE install media.

    To make the installation of the firmware as easy as possible in this troublesome
    case, I have modified the standard bcm43xx firmware installation script to skip
    the download stage. This new script and the necessary files are included in a
    tar archive that can be downloaded using any system with network access.

    The specific steps are as follows:

    1. Download
    http://www.lwfinger.com/b43-firmware...rmware.tar.bz2 on
    any system with a network connection.

    2. Copy that file to your openSUSE system via USB stick or CD.

    3. From the directory where you copied the file, run the command

    Code:
    tar jxvf no_net_install_bcm43xx_firmware.tar.bz2
    That command creates a new subdirectory bcm43xx_firmware with four files in it.

    4. Install the b43 and b43legacy firmware by running the command:

    Code:
    sudo bcm43xx_firmware/install_bcm43xx_firmware_no_net
    This step will create the necessary firmware files in /lib/firmware/b43/ and
    /lib/firmware/b43legacy/ and then reboot your computer. When it comes back up,
    the wireless device should be working and can be configured in the normal manner.

    5. (optional) If you do not have much disk space available, you can save about
    25 MB by using the commands

    Code:
    rm -rf bcm43xx_firmware
    rm no_net_install_bcm43xx_firmware.tar.bz2
    The downloaded file is suitable for all supported versions of openSUSE, and
    works for all architectures. I suggest that you leave it on whatever medium you
    used to transport it to openSUSE so that it will be available for your next
    installation of openSUSE.

    Larry Finger


  2. #2
    Join Date
    Mar 2010
    Location
    Austin - Texas
    Posts
    10,140
    Blog Entries
    48

    Smile Re: Broadcom firmware is needed for b43, but I have no network - an easierwork around

    Great Article on Wireless Larry!
    My Blog: https://forums.opensuse.org/blogs/jdmcdaniel3/

    Software efficiency halves every 18 months, thus compensating for Moore's Law

    Its James again from Austin, Texas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •