Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Failed dependencies: libcrypto.so.6 and libssl.so.6

  1. #1

    Default Failed dependencies: libcrypto.so.6 and libssl.so.6

    Hello Everyone,

    Now I just fresh installed OpenSUSE 12.2. Then I tried to install a software, but it showed some failed dependencies error.

    Code:
    Lumerical FDTD Solutions install utility
    
    Destination folder
    
    Please enter the install directory [/opt/lumerical/fdtd]:
    Removing RPM: aksusbd-1.15-1.i386
    Installing RPM: hardware_key_driver/aksusbd-1.15-1.i386.rpm
    redirecting to systemctl
    Installing RPM: rpm_install_files/FDTD-8.5.3-1.rhel5.x86_64.rpm
    error: Failed dependencies:
            libcrypto.so.6()(64bit) is needed by FDTD-8.5.3-1.rhel5.x86_64
            libssl.so.6()(64bit) is needed by FDTD-8.5.3-1.rhel5.x86_64
    Warning:RPM command reported error. You may need to troubleshoot install
    I'v tried to make a softlink as follow but no help. I also tried to make link with version 0.9.7 and 0.9.8. None of them help.

    Code:
    sudo ln -s /lib64/libssl.so.1.0.0 /lib64/libssl.so.6
    sudo ln -s /lib64/libcrypto.so.1.0.0 /lib64/libcrypto.so.6
    Is there any way to solve this problem?
    Thanks in advance.


    Regards,
    Tao Fei

  2. #2
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,733
    Blog Entries
    20

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Just to be clear
    You are trying to install a rhel5 .rpm in openSUSE?
    Leap 15.1_KDE
    My Articles Was I any help? If yes: Click the star below

  3. #3
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    25,136

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by dddtc2005 View Post
    Hello Everyone,

    Now I just fresh installed OpenSUSE 12.2. Then I tried to install a software, but it showed some failed dependencies error.

    Code:
    Lumerical FDTD Solutions install utility
    
    Destination folder
    
    Please enter the install directory [/opt/lumerical/fdtd]:
    Removing RPM: aksusbd-1.15-1.i386
    Installing RPM: hardware_key_driver/aksusbd-1.15-1.i386.rpm
    redirecting to systemctl
    Installing RPM: rpm_install_files/FDTD-8.5.3-1.rhel5.x86_64.rpm
    error: Failed dependencies:
            libcrypto.so.6()(64bit) is needed by FDTD-8.5.3-1.rhel5.x86_64
            libssl.so.6()(64bit) is needed by FDTD-8.5.3-1.rhel5.x86_64
    Warning:RPM command reported error. You may need to troubleshoot install
    I'v tried to make a softlink as follow but no help. I also tried to make link with version 0.9.7 and 0.9.8. None of them help.

    Code:
    sudo ln -s /lib64/libssl.so.1.0.0 /lib64/libssl.so.6
    sudo ln -s /lib64/libcrypto.so.1.0.0 /lib64/libcrypto.so.6
    Is there any way to solve this problem?
    Thanks in advance.


    Regards,
    Tao Fei
    Talking about "a software" is not very helpful to those who might try to help you. You should desscribe all the steps you took, preferable by showing not only output from a coimmand, but also the command itself.

    This the more because you apperently try to install software not in the "normal" openSUSE way (using YaST > Software > Software management or zypper), but in another way. That is not wrong in itself, but when you keep everything a secret to you, nobody can help you.
    Henk van Velden

  4. #4

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by caf4926 View Post
    Just to be clear
    You are trying to install a rhel5 .rpm in openSUSE?
    Yes, the file name contain rhel5.rpm but officially it says that the supported systems are
    • RedHat Enterprise Linux Versions 5 & 6 (64 bit x86_64 processor only)
    • CentOS Linux Versions 5 & 6 (64 bit x86_64 processor only)
    • SUSE Linux Enterprise 10 (64 bit x86_64 processor only)


    So I think I could try OpenSUSE.

  5. #5
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,733
    Blog Entries
    20

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by dddtc2005 View Post
    Yes, the file name contain rhel5.rpm but officially it says that the supported systems are
    • RedHat Enterprise Linux Versions 5 & 6 (64 bit x86_64 processor only)
    • CentOS Linux Versions 5 & 6 (64 bit x86_64 processor only)
    • SUSE Linux Enterprise 10 (64 bit x86_64 processor only)


    So I think I could try OpenSUSE.
    Not really

    You do better seeing if someone can build it on OBS
    @malcolmlewis is a likely candidate for that
    Leap 15.1_KDE
    My Articles Was I any help? If yes: Click the star below

  6. #6

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by hcvv View Post
    Talking about "a software" is not very helpful to those who might try to help you. You should desscribe all the steps you took, preferable by showing not only output from a coimmand, but also the command itself.

    This the more because you apperently try to install software not in the "normal" openSUSE way (using YaST > Software > Software management or zypper), but in another way. That is not wrong in itself, but when you keep everything a secret to you, nobody can help you.
    Thanks for the reply and sorry for incomplete information. I just didn't know which information is useful, rather than keeping it secret.

    To be clear, the software I would like to install is FDTD solutions which is a Maxwell equation solver. From the website information, its linux version support RedHat enterprise Linux version 5&6 (x64 only), CentOS 5&6(x64 only), SUSE Enterprise 10(x64 only). Then I decide to try on OpenSUSE. Here what I have done:

    Download the
    FDTD_Solutions-8.5.3.tar.gz file
    login as root
    Code:
    tar -zxf FDTD_Solutions-8.5.3.tar.gz
    cd FDTD_Solutions-8.5.3
    sh ./install.sh
    then choose the install direction and then get the failed dependencies error as shown before.

  7. #7

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by caf4926 View Post
    Not really

    You do better seeing if someone can build it on OBS
    @malcolmlewis is a likely candidate for that
    Thanks. It seems that the software just need the two lib files. Is there any way to find them or just use some other for substitution? I just came from windows, feels like everything is new...


    Regards,
    TF

  8. #8

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    dddtc2005 wrote:
    > caf4926;2520883 Wrote:
    >> Not really
    >>
    >> You do better seeing if someone can build it on OBS
    >> @malcolmlewis is a likely candidate for that


    I think the problem with that is that the software is not open source.

    > Thanks. It seems that the software just need the two lib files. Is
    > there any way to find them or just use some other for substitution? I
    > just came from windows, feels like everything is new...


    Their website says:

    "For operating systems not explicitly listed under supported systems,
    Lumerical encourages users to evaluate FDTD Solutions on the desired
    platform and to contact us for installation support if necessary."

    So why not do as they say and contact them?

  9. #9
    Join Date
    Sep 2012
    Location
    Germany
    Posts
    254

    Default AW: Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by dddtc2005 View Post
    Now I just fresh installed OpenSUSE 12.2.
    Quote Originally Posted by dddtc2005 View Post
    From the website information, its linux version support [...] SUSE Enterprise 10 (x64 only). Then I decide to try on OpenSUSE.
    SUSE Enterprise 10 != openSUSE 12.2
    zypp it...

  10. #10

    Default Re: Failed dependencies: libcrypto.so.6 and libssl.so.6

    Quote Originally Posted by djh-novell View Post
    dddtc2005 wrote:
    > caf4926;2520883 Wrote:
    >> Not really
    >>
    >> You do better seeing if someone can build it on OBS
    >> @malcolmlewis is a likely candidate for that


    I think the problem with that is that the software is not open source.

    > Thanks. It seems that the software just need the two lib files. Is
    > there any way to find them or just use some other for substitution? I
    > just came from windows, feels like everything is new...


    Their website says:

    "For operating systems not explicitly listed under supported systems,
    Lumerical encourages users to evaluate FDTD Solutions on the desired
    platform and to contact us for installation support if necessary."

    So why not do as they say and contact them?
    Yeah, Of course. I'v contacted them and told them the error. But I don't think the problem will be solved soon...

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •