Results 1 to 7 of 7

Thread: Installing Zimbra - Not detecting GMP?

  1. #1

    Angry Installing Zimbra - Not detecting GMP?

    So I would ask this on Zimbra's forums, but it seems more of an OpenSUSE question (and my friend pointed out that they would be of no help to me).
    When Zimbra checks if I have the required software, it shows this:
    Code:
    Checking for prerequisites...
         FOUND: NPTL
         FOUND: sudo-1.8.2-2.1.2
         FOUND: libidn-1.22-7.1.2
         MISSING: gmp
         FOUND: /usr/lib/libstdc++.so.6
    Checking for suggested prerequisites...
         FOUND: sysstat
         MISSING: sqlite does not appear to be installed.
    The SQLite is installed and it's saying no to that, but that's not really important. It wont let me proceed when I try to because it says GMP isn't installed and is required.
    I checked and I do have GMP installed (GMP 5 and GMP 3), and it doesn't work even if I have only one installed at one time.

    I've seen Zimbra questions posted here, but none were helpful.
    And I saw somebody say GMP 4 was required, but it seems GMP 4 has fallen off the face of the Earth.

    So if you know anything, please help
    Thanks in advance.

  2. #2
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: Installing Zimbra - Not detecting GMP?

    On 2012-06-27 21:46, incedo wrote:
    > The SQLite is installed and it's saying no to that, but that's not
    > really important. It wont let me proceed when I try to because it says
    > GMP isn't installed and is required.


    You do not say, but I assume you are running a ./configure. You do know
    that you need the corresponding "-devel" packages?

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.4 x86_64 "Celadon" at Telcontar)



  3. #3
    dd@home.dk NNTP User

    Default Re: Installing Zimbra - Not detecting GMP?

    > MISSING: gmp

    use YaST Software Management to install gmp


    > MISSING: sqlite does not appear to be installed.
    >
    > The SQLite is installed


    what parts and pieces named sqlite does zimbra want/need/expect?

    i ask because my YaST Software Management shows i have only 3 pieces of
    sqlite installed, and 27 packages are not installed.

    so, when you look at the zimbra documentation, what parts/pieces of
    sqlite does _it_ say needs to be installed.....exactly?

    when you have found out exactly what zimbra needs and where how it needs
    it, THEN you will be ready to install sqlite to meet zimbra's needs..

    now, back to gmp: _exactly_ what parts of gmp are needed? i ask because
    i see i have 4 out of 78!!! pachages with 'gmp' in its name...so, when
    learning what zimbra want of sqlite, also seek more info on what it
    wants in the way of gmp support!

    when you have done both of those things then you may not need to ask any
    questions here... or maybe you do, so come back and let us know how it
    goes..

    wait a moment: are you really using openSUSE in a DataCenter??? are you
    using openSUSE, or SUSE Linux Enterprise?? if the latter you are in the
    wrong forum...tell us what you are using, if you are not certain do this
    in a terminal:

    [code]
    cat /etc/SuSE-release
    [code]
    --
    dd

  4. #4
    Join Date
    Feb 2010
    Location
    Germany
    Posts
    4,654

    Default Re: Installing Zimbra - Not detecting GMP?

    If this is the binary Zimbra installer and you really have openSUSE and
    not SLES you have a problem since the corresponding versions of the
    components Zimbra wants are clearly not the same as in SLES.

    If you are using the open source edition of Zimbra I recommend you
    download the sources and compile it yourself.

    If it is not the open source edition but the commercial one you have
    support by zimbra - contact them.

    --
    PC: oS 12.1 x86_64 | i7-2600@3.40GHz | 16GB | KDE 4.8.4 | GeForce GT 420
    ThinkPad E320: oS 12.1 x86_64 | i3@2.30GHz | 8GB | KDE 4.8.4 | HD 3000
    eCAFE 800: oS 12.1 i586 | AMD Geode LX 800@500MHz | 512MB | KDE 3.5.10



  5. #5

    Default Re: Installing Zimbra - Not detecting GMP?

    Quote Originally Posted by dd@home.dk View Post
    > MISSING: gmp

    use YaST Software Management to install gmp


    > MISSING: sqlite does not appear to be installed.
    >
    > The SQLite is installed


    what parts and pieces named sqlite does zimbra want/need/expect?

    i ask because my YaST Software Management shows i have only 3 pieces of
    sqlite installed, and 27 packages are not installed.

    so, when you look at the zimbra documentation, what parts/pieces of
    sqlite does _it_ say needs to be installed.....exactly?

    when you have found out exactly what zimbra needs and where how it needs
    it, THEN you will be ready to install sqlite to meet zimbra's needs..

    now, back to gmp: _exactly_ what parts of gmp are needed? i ask because
    i see i have 4 out of 78!!! pachages with 'gmp' in its name...so, when
    learning what zimbra want of sqlite, also seek more info on what it
    wants in the way of gmp support!

    when you have done both of those things then you may not need to ask any
    questions here... or maybe you do, so come back and let us know how it
    goes..

    wait a moment: are you really using openSUSE in a DataCenter??? are you
    using openSUSE, or SUSE Linux Enterprise?? if the latter you are in the
    wrong forum...tell us what you are using, if you are not certain do this
    in a terminal:

    [code]
    cat /etc/SuSE-release
    [code]
    --
    dd
    I can't believe I left out that much information
    When I did the command you told me, it said this:
    openSUSE 12.1 (x86_64)
    VERSION = 12.1
    CODENAME = Asparagus
    I am on my way to the Zimbra Wiki for more information on what it needs

    Quote Originally Posted by robin_listas View Post
    On 2012-06-27 21:46, incedo wrote:
    > The SQLite is installed and it's saying no to that, but that's not
    > really important. It wont let me proceed when I try to because it says
    > GMP isn't installed and is required.


    You do not say, but I assume you are running a ./configure. You do know
    that you need the corresponding "-devel" packages?

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.4 x86_64 "Celadon" at Telcontar)
    I forgot to say this, but I downloaded the Zimbra Community Edition for their website, and used ./install.sh



    Thank you, both of you!

  6. #6
    Join Date
    Feb 2010
    Location
    Germany
    Posts
    4,654

    Default Re: Installing Zimbra - Not detecting GMP?

    Am 27.06.2012 23:16, schrieb incedo:
    > I forgot to say this, but I downloaded the Zimbra Community Edition for their website, and used ./install.sh

    And that's your problem since there is no binary installer for openSUSE
    but only for SLES.
    Fetch the sources and compile it.


    --
    PC: oS 12.1 x86_64 | i7-2600@3.40GHz | 16GB | KDE 4.8.4 | GeForce GT 420
    ThinkPad E320: oS 12.1 x86_64 | i3@2.30GHz | 8GB | KDE 4.8.4 | HD 3000
    eCAFE 800: oS 12.1 i586 | AMD Geode LX 800@500MHz | 512MB | KDE 3.5.10



  7. #7
    Join Date
    Feb 2010
    Location
    Germany
    Posts
    4,654

    Default Re: Installing Zimbra - Not detecting GMP?

    Am 27.06.2012 23:28, schrieb Martin Helm:
    > Am 27.06.2012 23:16, schrieb incedo:
    >> I forgot to say this, but I downloaded the Zimbra Community Edition for their website, and used ./install.sh

    > And that's your problem since there is no binary installer for openSUSE
    > but only for SLES.
    > Fetch the sources and compile it.
    >
    >

    Just to add what I would really do if I where you and would not want to
    jump through the hoops compiling a complex system.

    Use Virtualbox, Vmware or your favorite virtualization solution on the
    openSUSE 12.1 machine.
    Install CentOS 6 64 bit as virtual machine, download the binary Zimbra
    for Red Hat Enterprise 6 and install it in CentOS.
    You are done and you have a clean dedicated virtualized Zimbra server
    running on openSUSE 12.1 without tinkering.

    --
    PC: oS 12.1 x86_64 | i7-2600@3.40GHz | 16GB | KDE 4.8.4 | GeForce GT 420
    ThinkPad E320: oS 12.1 x86_64 | i3@2.30GHz | 8GB | KDE 4.8.4 | HD 3000
    eCAFE 800: oS 12.1 i586 | AMD Geode LX 800@500MHz | 512MB | KDE 3.5.10



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •