Results 1 to 3 of 3

Thread: Mouse wheel click won't paste: GeForce 9100, HP Optical Mouse

  1. #1

    Default Mouse wheel click won't paste: GeForce 9100, HP Optical Mouse

    When I run `/usr/bin/xinput --test 11' where 11 is the USB Optical Mouse id=11 shown from `/usr/bin/xinput --list', I get no input from clicking the mouse wheel. This recently changed and I don't know why. Does anybody else have this problem? Know how to fix it?

    openSUSE 12.1 (x86_64)

    # hwinfo --gfxcard

    32: PCI 200.0: 0300 VGA compatible controller (VGA)
    [Created at pci.319]
    Unique ID: B35A.gjcntUyfG7F
    Parent ID: gZD2.t79_63UH7A4
    SysFS ID: /devices/pci0000:00/0000:00:0b.0/0000:02:00.0
    SysFS BusID: 0000:02:00.0
    Hardware Class: graphics card
    Model: "nVidia C78 [GeForce 9100]"
    Vendor: pci 0x10de "nVidia Corporation"
    Device: pci 0x0847 "C78 [GeForce 9100]"
    SubVendor: pci 0x103c "Hewlett-Packard Company"
    SubDevice: pci 0x2a9e
    Revision: 0xa2
    Driver: "nvidia"
    Driver Modules: "nvidia"
    Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
    Memory Range: 0xe8000000-0xefffffff (ro,non-prefetchable)
    Memory Range: 0xe6000000-0xe7ffffff (ro,non-prefetchable)
    I/O Ports: 0xec00-0xec7f (rw)
    Memory Range: 0xfeae0000-0xfeafffff (ro,non-prefetchable,disabled)
    IRQ: 20 (3088887 events)
    I/O Ports: 0x3c0-0x3df (rw)
    Module Alias: "pci:v000010DEd00000847sv0000103Csd00002A9Ebc03sc00i00"
    Driver Info #0:
    Driver Status: nvidiafb is not active
    Driver Activation Cmd: "modprobe nvidiafb"
    Driver Info #1:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
    Driver Info #2:
    Driver Status: nvidia is active
    Driver Activation Cmd: "modprobe nvidia"
    Config Status: cfg=no, avail=yes, need=no, active=unknown
    Attached to: #21 (PCI bridge)

    Primary display adapter: #32

    # hwinfo --mouse

    42: USB 00.0: 10503 USB Mouse
    [Created at usb.122]
    Unique ID: CiZ2.ESfJHxT2CJ9
    Parent ID: uIhY.kllrQr_lFX9
    SysFS ID: /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0
    SysFS BusID: 3-3:1.0
    Hardware Class: mouse
    Model: "USB Optical Mouse"
    Hotplug: USB
    Vendor: usb 0x192f
    Device: usb 0x0416 "USB Optical Mouse"
    Revision: "2.00"
    Compatible to: int 0x0210 0x0023
    Driver: "usbhid"
    Driver Modules: "usbhid"
    Device File: /dev/input/mice (/dev/input/mouse0)
    Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-id/usb-192f_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:02.0-usb-0:3:1.0-event-mouse, /dev/input/by-id/usb-192f_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:02.0-usb-0:3:1.0-mouse
    Device Number: char 13:63 (char 13:32)
    Speed: 1.5 Mbps
    Module Alias: "usb:v192Fp0416d0200dc00dsc00dp00ic03isc01ip02"
    Driver Info #0:
    Buttons: 3
    Wheels: 2
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Attached to: #37 (Hub)

    From /etc/X11/xorg.conf

    Section "InputDevice"
    # generated from data in "/etc/sysconfig/mouse"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "Emulate3Buttons" "yes"
    Option "ZAxisMapping" "4 5"
    EndSection

  2. #2

    Angry Solved: Mouse wheel click won't paste: GeForce 9100, HP Optical Mouse

    By physically rapping the mouse sideways on the desk a few times, it started working again. Duh!

  3. #3

    Default Re: Mouse wheel click won't paste: GeForce 9100, HP Optical Mouse

    Haha, thanks, mate! I had the same problem and tried EVERYTHING!
    Your solution finally worked!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •