Results 1 to 4 of 4

Thread: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) DRI

  1. #1

    Default Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) DRI

    Не могу настроить DRI на сервере.
    Операционная система SUSE 11.3 x64
    lspci -v

    02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA controller])
    Subsystem: ServerEngines Corp. Device 0100
    Flags: bus master, fast devsel, latency 0, IRQ 10
    Memory at f8000000 (32-bit, prefetchable) [size=16M]
    Memory at fbdfc000 (32-bit, non-prefetchable) [size=16K]
    Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at fbde0000 [disabled] [size=64K]
    Capabilities: [dc] Power Management version 2
    Capabilities: [e4] Express Legacy Endpoint, MSI 00
    Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-

    Лог Xorg

    [ 3691.147] (II) Loading sub module "fb"
    [ 3691.147] (II) LoadModule: "fb"
    [ 3691.148] (II) Loading /usr/lib64/xorg/modules/libfb.so
    [ 3691.148] (II) Module fb: vendor="X.Org Foundation"
    [ 3691.148] compiled for 1.8.0, module version = 1.0.0
    [ 3691.148] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 3691.148] (II) Loading sub module "xaa"
    [ 3691.148] (II) LoadModule: "xaa"
    [ 3691.149] (II) Loading /usr/lib64/xorg/modules/libxaa.so
    [ 3691.149] (II) Module xaa: vendor="X.Org Foundation"
    [ 3691.149] compiled for 1.8.0, module version = 1.2.1
    [ 3691.149] ABI class: X.Org Video Driver, version 7.0
    [ 3691.153] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    [ 3691.398] (--) MGA(0): 64 DWORD fifo
    [ 3691.444] (==) MGA(0): Default visual is TrueColor
    [ 3691.444] (WW) MGA(0): Not supported by hardware, not initializing the DRI
    [ 3691.444] (II) MGA(0): Using -615 lines for offscreen memory.
    [ 3691.444] (II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
    [ 3691.444] Screen to screen bit blits
    [ 3691.444] Solid filled rectangles
    [ 3691.444] Solid filled trapezoids
    [ 3691.444] 8x8 mono pattern filled rectangles
    [ 3691.444] 8x8 mono pattern filled trapezoids
    [ 3691.444] Indirect CPU to Screen color expansion
    [ 3691.444] Screen to Screen color expansion
    [ 3691.444] Solid Lines
    [ 3691.444] Dashed Lines
    [ 3691.444] Scanline Image Writes
    [ 3691.444] (==) MGA(0): Backing store disabled
    [ 3691.444] (==) MGA(0): Silken mouse enabled
    [ 3691.445] (==) MGA(0): DPMS enabled
    [ 3691.445] (WW) MGA(0): Direct rendering disabled
    [ 3691.445] (==) RandR enabled

    настройки xorg.conf

    Section "Device"
    Identifier "MGA"
    VendorName "Matrox"
    Driver "mga"
    Option "MGASDRAM" "true"
    VideoRam 8192
    Option "AGPMode" "4"
    EndSection

    Section "Module"
    Load "glx"
    Load "dri"
    Load "dri2"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    DefaultDepth 16
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection


    В чем проблема разобраться немогу.... Помогите плиз

  2. #2
    Join Date
    Dec 2010
    Location
    Belarus
    Posts
    984

    Default Re: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) DRI

    По-моему для данной карточки лучше использовать vesa.

  3. #3
    Join Date
    Nov 2008
    Location
    Saint-Petersburg, Russia
    Posts
    1,146

    Default Re: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) DRI

    И не настроите:
    Not supported by hardware, not initializing the DRI
    "Лучше молчать и прослыть дураком, чем открыть рот и развеять все сомнения." Марк Твен.

  4. #4

    Default Re: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) DRI

    Пробовал. Не получается.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •